Augmentation of heat transfer in a bubble agitated vertical rectangular channel

This paper presents the results of an experimental study of convective heat transfer between three parallel vertical plates symmetrically spaced with and without bubble agitation to ascertain the degree of augmentation of the heat transfer coefficients due to agitation. The centre plate was electrically heated, while the other side plates were water-cooled forming two successive parallel vertical rectangular channels of dimensions 20 cm x 3.5 cm x 35 cm (length W, gap L, height H) each. At the bottom of the hot and cold plates air spargers were fitted. Water/ethylene glycol (100%) was used to fill the channels. The superficial gas velocity ranged from 0.0016 to 0.01 m/s. Top, bottom and sides of the channels were open to the water/ethylene glycol in the chamber which is the novel aspect of this study. Experimental data have been correlated as under: Natural convective heat transfer: Nu = 0.60 Gr(0.29), r = 0.96, sigma = 0.186, 1.17 E6 < Gr < 1.48 E7; Bubble agitated heat transfer: St = 0.11(ReFrPr2)(-0.23), r = 0.82, sigma = 0.002, 1.20 E-2 < (ReFrPr2) < 1.36 E2.