A novel compliant surgical robot: Preliminary design analysis

被引：4
|
作者：
Kapsalyamov, Akim [1 ]
Hussain, Shahid [2 ]
Jamwal, Prashant K. [1 ]
机构：
[1] Nazarbayev Univ, Dept Elect & Comp Engn, Astana, Kazakhstan
[2] Univ Canberra, Fac Sci & Technol, Human Centred Technol Res Ctr, Canberra, ACT, Australia
来源：
MATHEMATICAL BIOSCIENCES AND ENGINEERING | 2020年 / 17卷 / 03期
关键词：
medical robots; minimally invasive surgery; laparoscopic camera; remote center of motion; pneumatic actuator; MOTION CONTROL; SURGERY; SYSTEM;
D O I：
10.3934/mbe.2020103
中图分类号：
Q [生物科学];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
A robotic surgical system capable of performing minimally invasive surgery (MIS) is proposed in this paper. Based on the requirements of MIS, a compliant, seven- degrees of freedom (7-DOF) pneumatically actuated mechanism is designed. A remote center of motion (RCM) as a parallelogram mechanism for holding the laparoscopic camera is also developed. The operating workspace of robotic surgical system is determined considering the physical constraints imposed by mechanical joints. The simulation results show that the robotic system meets the design requirement. This research will lay a good foundation for the development of a compliant surgical robot to assist in MIS.
引用
收藏
页码：1944 / 1958
页数：15
相关论文
共 50 条
  • [41] Design and quantitative analysis of a novel brachytherapy robot
    Meltsner, M
    Ferrier, N
    Thomadsen, B
    [J]. MEDICAL PHYSICS, 2005, 32 (06) : 1949 - 1949
  • [42] A Novel Hexapod Robot: Design and Mobility Analysis
    Chen, Long
    Zhong, Guoliang
    Li, Zhuoxi
    Deng, Hua
    [J]. 2016 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, 2016, : 2094 - 2098
  • [43] A Novel Continuum Robot Using Twin-Pivot Compliant Joints: Design, Modeling, and Validation
    Dong, Xin
    Raffles, Mark
    Cobos-Guzman, Salvador
    Axinte, Dragos
    Kell, James
    [J]. JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2016, 8 (02):
  • [44] Teleoperated Puncture Robot System: Preliminary Design and Workspace Analysis
    Hu B.
    Lin Y.
    Chen S.
    Wang F.
    Ma X.
    Cao Q.
    [J]. Journal of Shanghai Jiaotong University (Science), 2022, 27 (01) : 15 - 23
  • [45] Design and application of compliant mechanisms for surgical tools
    Kota, S
    Lu, KJ
    Kreiner, Z
    Trease, B
    Geiger, J
    [J]. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 2005, 127 (06): : 981 - 989
  • [46] Dimensional synthesis and concept design of a novel minimally invasive surgical robot
    Niu, Guojun
    Pan, Bo
    Zhang, Fuhai
    Feng, Haibo
    Gao, Wenpeng
    Fu, Yili
    [J]. ROBOTICA, 2018, 36 (05) : 715 - 737
  • [47] CONTROL DESIGN OF ROBOT FOR COMPLIANT MANIPULATION ON DYNAMIC ENVIRONMENTS
    LUO, ZW
    ITO, M
    [J]. IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, 1993, 9 (03): : 286 - 296
  • [48] OPTIMAL MECHATRONIC DESIGN OF A QUADRUPED ROBOT WITH COMPLIANT LEGS
    Arcos-Legarda, Jaime
    Hisham, Khunsa
    Anwar, Sohel
    Tovar, Andres
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2018, VOL 4A, 2019,
  • [49] The Design of the Lower Body of the Compliant Humanoid Robot "cCub"
    Tsagarakis, Nikos G.
    Li, Zhibin
    Saglia, Jody
    Caldwell, Darwin G.
    [J]. 2011 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA), 2011, : 2035 - 2040
  • [50] Impact reduction mobile robot and the design of the compliant legs
    Chanthasopeephan, Teeranoot
    Jarakorn, Arnas
    Polchankajorn, Pongsakorn
    Maneewarn, Thavida
    [J]. ROBOTICS AND AUTONOMOUS SYSTEMS, 2014, 62 (01) : 38 - 45
12345