Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V

被引：121
|
作者：
Akerfeldt, Pia [1 ]
Antti, Marta-Lena [1 ]
Pederson, Robert [1 ]
机构：
[1] Lulea Univ Technol, Div Mat Sci, SE-97181 Lulea, Sweden
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2016年 / 674卷
关键词：
Titanium alloys; Additive manufacturing; Mechanical properties; Microstructure; Laser metal wire deposition; DIODE-LASER; FABRICATION; COMPONENTS; TEXTURE; POWER;
D O I：
10.1016/j.msea.2016.07.038
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In the present paper laser metal wire deposition of Ti-6Al-4V has been studied and the mechanical properties evaluated. The yield strength, ultimate tensile strength and tensile elongation were all found to depend on the orientation of the specimens with respect to the deposition direction. Two orientations in the deposited material were evaluated in the study, perpendicular and parallel to the deposition direction. The specimens in the perpendicular orientation showed 25-33% higher elongation than the specimens parallel to the deposition direction. The parallel specimens on the other hand showed both higher (4%) ultimate tensile strength and higher (2-5%) yield strength. Furthermore, the anisotropic mechanical properties were correlated to the microstructural constituents of the specimens. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码：428 / 437
页数：10
相关论文
共 50 条
  • [1] Microstructure and Mechanical Properties of Laser Metal Deposited Ti-6Al-4V
    Akerfeldt, Pia
    Pederson, Robert
    Antti, Marta-Lena
    [J]. TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL III, 2012, : 1730 - 1734
  • [2] Influence of deposition strategy on the microstructure and fatigue properties of laser metal deposited Ti-6Al-4V powder on Ti-6Al-4V substrate
    Choi, Yi Rye
    Sun, Shi D.
    Liu, Qianchu
    Brandt, Milan
    Qian, Ma
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2020, 130
  • [3] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DIRECT METAL LASER SINTERED TI-6AL-4V
    Becker, T. H.
    Beck, M.
    Scheffer, C.
    [J]. SOUTH AFRICAN JOURNAL OF INDUSTRIAL ENGINEERING, 2015, 26 (01): : 1 - 10
  • [4] Research on microstructure and mechanical properties of laser direct deposited Ti-6Al-4V alloy
    Gao, SY
    Zhang, YZ
    Shi, LK
    Wang, DW
    [J]. THERMEC'2003, PTS 1-5, 2003, 426-4 : 695 - 700
  • [5] Microstructure and mechanical properties of direct metal laser sintered Ti-6Al-4V
    Department of Mechanical and Mechatronic Engineering, Stellenbosch University, Stellenbosch, South Africa
    不详
    [J]. South Afr. J. Ind. Eng., 1 (1-10):
  • [6] Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
    Fude Wang
    Stewart Williams
    Paul Colegrove
    Alphons A. Antonysamy
    [J]. Metallurgical and Materials Transactions A, 2013, 44 : 968 - 977
  • [7] Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
    Wang, Fude
    Williams, Stewart
    Colegrove, Paul
    Antonysamy, Alphons A.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (02): : 968 - 977
  • [8] INFLUENCE OF MICROSTRUCTURE AND TEXTURE ON MECHANICAL-PROPERTIES OF TI-6AL-4V
    PETERS, M
    GYSLER, A
    [J]. JOURNAL OF METALS, 1980, 32 (12): : 90 - 91
  • [9] Microstructure and mechanical properties of severely deformed TI-6AL-4V and TI-6AL-4V/TiC metal matrix composite
    Yapici, GG
    Karaman, I
    Luo, ZP
    [J]. ULTRAFINE GRAINED MATERIALS III, 2004, : 433 - 438
  • [10] Microstructure and mechanical properties of laser rapid formed Ti-6Al-4V alloy
    Chen Jing
    Xue Lei
    Yang Haiou
    Tan Hua
    Huang Weidong
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2006, 35 : 160 - 163
12345