The lubrication approximation of the friction force for the simulation of measured surfaces

被引：11

作者：

Checo, Hugo M. ^{[1
]}

Jaramillo, Alfredo ^{[1
]}

Ausas, Roberto F. ^{[1
]}

Buscaglia, Gustavo C. ^{[1
]}

机构：

[1] Univ Sao Paulo, Inst Ciencias Matemat & Computacao, BR-13560970 Sao Carlos, SP, Brazil

来源：

TRIBOLOGY INTERNATIONAL | 2016年 / 97卷

基金：

巴西圣保罗研究基金会;

关键词：

Hydrodynamic lubrication; Friction force; Measured-surface simulation; Mass-conservative model; REYNOLDS-EQUATION; STOKES EQUATIONS; HOMOGENIZATION; ROUGHNESS;

D O I：

10.1016/j.triboint.2015.12.030

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Models of the friction force are assessed by direct comparison with two-dimensional Navier-Stokes results. A three-term formula obtained from asymptotic expansion provides a reasonable estimate of the hydrodynamic friction of rough runners even at sub-micron clearances. Simulations of a measured honed surface are then reported using the conservative time-dependent Elrod-Adams model with spatial resolutions as fine as 0.25 mu m per cell (4000 x 800 mesh). Mesh convergence of the numerical method is observed. Cell sizes between 0.5 mu m and 1 mu m appear as a reasonable compromise of accuracy and cost for the simulation of honed runners. The significance of each term of the friction formula is discussed, so as to assess the error involved in neglecting terms of the friction formula. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：390 / 399

页数：10

共 50 条

[41] Thermodynamic Theory of Two Rough Surfaces Friction in the Boundary Lubrication Mode
Iakov A. Lyashenko
Alexei V. Khomenko
Tribology Letters, 2012, 48 : 63 - 75
[42] Thermodynamic Theory of Two Rough Surfaces Friction in the Boundary Lubrication Mode
Lyashenko, Iakov A.
Khomenko, Alexei V.
TRIBOLOGY LETTERS, 2012, 48 (01) : 63 - 75
[43] USE OF PROFILE DATA IN SIMULATION OF LUBRICATION OF REAL SURFACES
KWEH, CC
PATCHING, MJ
EVANS, HP
SNIDLE, RW
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1992, 32 (1-2): : 75 - 81
[44] Friction of Textured Surfaces in EHL and Mixed Lubrication: Effect of the Groove Topography
Touche, Thomas
Cayer-Barrioz, Juliette
Mazuyer, Denis
TRIBOLOGY LETTERS, 2016, 63 (02)
[45] Anomalous Low Friction Under Boundary Lubrication of Steel Surfaces by Polyols
Joly-Pottuz, L.
Martin, J. M.
Bouchet, M. I. De Barros
Belin, M.
TRIBOLOGY LETTERS, 2009, 34 (01) : 21 - 29
[46] Friction behaviors of rough chromium surfaces under starving lubrication conditions
Liu, Derong
Yan, Bo
Shen, Bin
Liu, Lei
Hu, Wenbin
APPLIED SURFACE SCIENCE, 2018, 427 : 857 - 862
[47] Promoting rotation, friction, and mixed lubrication for particles rolling on microstructured surfaces
Ryu, Brian K.
Hommel, Richard J.
Roberts, Paul
Frechette, Joelle
PHYSICAL REVIEW E, 2019, 99 (02)
[48] Shear, friction, and lubrication forces between polymer-bearing surfaces
Klein, J
ANNUAL REVIEW OF MATERIALS SCIENCE, 1996, 26 : 581 - 612
[49] Anomalous Low Friction Under Boundary Lubrication of Steel Surfaces by Polyols
L. Joly-Pottuz
J. M. Martin
M. I. De Barros Bouchet
M. Belin
Tribology Letters, 2009, 34 : 21 - 29
[50] SOME ASPECTS OF BOUNDARY LUBRICATION IN THE LOCAL CONTACT OF FRICTION-SURFACES
RAYIKO, MV
DMYTRYCHENKO, NF
WEAR, 1988, 126 (01) : 69 - 78

← 1 2 3 4 5 →