Heat analysis of the power transformer bushings using the finite element method

被引：32

作者：

Allahbakhshi, Mehdi ^{[1
]}

Akbari, Milad ^{[1
]}

机构：

[1] Shiraz Univ, Sch Elect & Comp Engn, Shiraz, Iran

来源：

APPLIED THERMAL ENGINEERING | 2016年 / 100卷

关键词：

Power transformer; Bushing; Finite element method; Hottest spot temperature; Temperature distribution; THERMAL PERFORMANCE; INSULATION;

D O I：

10.1016/j.applthermaleng.2016.02.065

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Reliability of power transformers significantly depends on the performance of their bushings and bushing lifetime is mainly dependent on its hottest spot temperature, which is caused by the power dissipation in the bushing's conductor. In this paper, the thermal analysis of the bushing is firstly performed in two-dimensional space using the differential equations. Then, the Finite Element Method (FEM) is employed to determine a bushing's temperature distribution and specify its hottest spot. The effects of increasing the temperature on the bushing's conductor are also investigated and the results are compared in different currents. The proposed method calculates the temperature distribution in all parts of bushing including conductor surface, paper, porcelain and oil. It is useful for manufacturer and utilities to evaluate the insulation design, temperature distribution and loss of insulation life. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：714 / 720

页数：7

共 50 条

[21] ANALYSIS OF PIEZOELECTRIC TRANSFORMER BY FINITE ELEMENT METHOD AND EXPERIMENTAL VERIFICATION
Martin, Klaus T.
Andres, Bernardo
Bisogno, Fabio E.
[J]. 2015 IEEE 13TH BRAZILIAN POWER ELECTRONICS CONFERENCE AND 1ST SOUTHERN POWER ELECTRONICS CONFERENCE (COBEP/SPEC), 2015,
[22] Vibration Response Analysis of Transformer Winding by Finite Element Method
Qian, G. Q.
Lu, Y.
Wang, F. H.
He, M. Z.
[J]. 2016 IEEE/PES TRANSMISSION AND DISTRIBUTION CONFERENCE AND EXPOSITION (T&D), 2016,
[23] Calculation of Stray Losses in Power Transformer Structural Parts Using Finite Element Method Combined with Analytical Method
Yan, Xiuke
Yu, Xiangdong
Shen, Min
Xie, Dexin
Bai, Baodong
Wang, Yu
[J]. 2015 18TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2015, : 320 - 324
[24] Winding Deformation Analysis in Power Transformers using Finite Element Method
Sahoo, Saroja Kanti
Gopalakrishna, S.
[J]. 2014 IEEE STUDENTS' TECHNOLOGY SYMPOSIUM (IEEE TECHSYM), 2014, : 341 - 346
[25] Power transformer design using magnetic circuit theory and finite element analysis - A comparison of techniques
Bell, Simon C.
Bodger, Pat S.
[J]. 2007 AUSTRALASIAN UNIVERSITIES POWER ENGINEERING, VOLS 1-2, 2007, : 447 - 452
[26] Finite Element Analysis of Short Circuit Electromagnetic Force in Power Transformer
Lee, J. Y.
Ahn, H. M.
Kim, J. K.
Oh, Y. H.
Hahn, S. C.
[J]. 2009 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1-3, 2009, : 468 - +
[27] Finite Element Modeling and DWT Analysis of Power Transformer Interturn Faults
Yan, Chenguang
Liu, Sumei
Zhang, Peng
Xu, Ya
[J]. TWENTIETH BIENNIAL IEEE CONFERENCE ON ELECTROMAGNETIC FIELD COMPUTATION (IEEE CEFC 2022), 2022,
[28] Analysis of Core Losses in a Three-Phase Distribution Transformer Under Reverse Power Flow Using the Finite Element Method
Pranke Perin, Joao Pedro
Neto, Nelson Knak
Medeiros, Leonardo Hautrive
Bender, Vitor
[J]. 2023 15TH SEMINAR ON POWER ELECTRONICS AND CONTROL, SEPOC, 2023,
[29] Analysis on Heat Transfer Distribution of Grounding System Using Finite Element Method
Halim, N. H.
Jusoh, N. S.
Arshad, S. N. M.
Isa, M.
Abdullah, A. Z.
Isa, M. A. M.
[J]. 2018 IEEE 7TH INTERNATIONAL CONFERENCE ON POWER AND ENERGY (PECON), 2018, : 257 - 262
[30] Analysis the three-dimensional magnetic fields of welding transformer by using of the finite element method
Zhao, Haiyan
Shi, Yaowu
Lu, Anli
Wu, Su
[J]. Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2001, 37 (02): : 74 - 78

← 1 2 3 4 5 →