The impact of clay dispersion and migration on soil hydraulic conductivity and pore networks

Using saline and sodic waters for irrigating agricultural lands has increased worldwide, which may cause adverse effects on soil porosity, structural stability and permeability. However, few studies have investigated the effect of clay swelling, dispersion and migration on the reduction of saturated hydraulic conductivity (K-sat) by analysing the total porosity and pore size change through the profile. In this study, two soils with contrasting mineralogy was used and packed at two different bulk densities (1.0 and 1.2 g cm(-3)). Soil columns were leached with three types of sodium adsorption ratio (SAR) solutions, i.e. good quality water (GQW), SAR 10 and SAR 50 solutions, before distilled water (low ionic strength) was leached through. The results indicated that the application of distilled water decreased Ksat for all soils, particularly in the initially sodic water treated columns. The Ksat of leaching with distilled water in low density columns were generally higher, but showed more degree of reduction than more compacted columns, mainly related to the high initial porosity and macropores that enabled dispersed clay to move through the soil column and out in the leachate. The application of distilled water significantly reduced the proportion of macro and mesopores, whereas increased the proportion of micropores in both soils, particularly for soil columns initially treated high SAR solutions. When the dispersed clay was trapped within the column, the depth of clay accumulation was affected by a combined effect of packing density, soil type and water quality.