Application of Dynamic φ-T Map: Analysis on a Natural Gas/Diesel Fueled RCCI Engine

In this study, dynamic phi-T map analysis was applied to a reactivity controlled compression ignition (RCCI) engine fueled with natural gas (NG) and diesel. The combustion process of the engine was simulated by coupled KIVA4-CHEMKIN with a diesel oil surrogate (DOS) chemical mechanism. The phi-T maps were constructed by the mole fractions of soot and NO obtained from SENKIN and phi-T conditions from engine simulations. Five parameters, namely, NG fraction, first start of injection (SOI) timing, second SOI timing, second injection duration, and exhaust gas recirculation (EGR) rate, were varied in certain ranges individually, and the phi-T maps were compared and analyzed under various conditions. The results revealed how the five parameters would shift the phi-T conditions and influence the soot-NO contour. Among the factors, EGR rate could limit the highest temperature due to its dilute effect, hence maintaining RCCI combustion within low-temperature combustion (LTC) region. The second significant parameter is the premixed NG fraction. It could set the lowest temperature; moreover, the tendency of soot formation can be mitigated due to the lessened fuel impingement and the absence of C-C bond. Finally, the region of RCCI combustion was added to the commonly known phi-T map diagram.