Adhesion Property of Polyimide and Passivation Layer for Polymer/metal Wafer-level Hybrid Bonding in 3D Integration

被引：3
|
作者：
Lu, Cheng-Hsien [1 ]
Kho, Yi-Tung [1 ]
Yang, Yu-Tao [1 ]
Chen, Yu-Pei [2 ]
Chen, Chiao-Pei [2 ]
Hung, Tsung-Tai [2 ]
Chen, Chiu-Feng [2 ]
Chen, Kuan-Neng [1 ]
机构：
[1] Natl Chiao Tung Univ, Dept Elect Engn, Hsinchu, Taiwan
[2] Taiflex Sci Corp, Kaohsiung, Taiwan
来源：
2018 IEEE 68TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2018) | 2018年
关键词：
adhesion; four-point bending; polyimide; polyimide-like; hybrid bonding; 3D integration;
D O I：
10.1109/ECTC.2018.00067
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
In this paper, the four-point bending method experiments were carried out with different polyimides and passivation layers for realization of adhesion property below 400 degrees C. Three types of passivation layers, thermal oxide, tetraethoxysilane (TEOS) oxide, silicon nitride, and three types of polyimides, with hydrophobic silane, with hydrophilic silane and without silane, and annealing temperature were all considered in this paper. Moreover, the relation between adhesion strength and surface roughness is discussed. Finally, a low thermal budget (250-375 degrees C) polyimide/metal hybrid bonding scheme with good stress release was proposed for future hybrid bonding applications.
引用
收藏
页码：401 / 406
页数：6
相关论文
共 50 条
  • [21] Fine keyed alignment and bonding for wafer-level 3D ICs
    Lee, Sang Hwui
    Niklaus, Frank
    McMahon, J. Jay
    Yu, Jian
    Kumar, Ravi J.
    Li, Hui-Feng
    Gutmann, Ronald J.
    Cale, Timothy S.
    Lu, J. -Q.
    MATERIALS, TECHNOLOGY AND RELIABILITY OF LOW-K DIELECTRICS AND COPPER INTERCONNECTS, 2006, 914 : 433 - +
  • [22] A Study on Wafer-Level 3D Integration Including Wafer Bonding using Low-k Polymeric Adhesive
    Kwon, Yongchai
    Seok, Jongwon
    Lu, Jian-Qiang
    Cale, Timothy
    Gutmann, Ronald
    KOREAN CHEMICAL ENGINEERING RESEARCH, 2007, 45 (05): : 466 - 472
  • [23] Adhesion Properties of Electroplating Process Between Polyimide and Metal Layer for Polymer/Metal Hybrid Bonding
    Lu, Cheng-Hsien
    Yang, Yi-Lun
    Chen, Chiao-Pei
    Tsai, Bin-Ling
    Chen, Kuan-Neng
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2020, 10 (01): : 168 - 175
  • [24] Bonding Technologies for Chip Level and Wafer Level 3D integration
    Sakuma, Katsuyuki
    Skordas, Spyridon
    Zitzi, Jeffrey
    Perfecto, Eric
    Guthrie, William
    Guerin, Luc
    Langlois, Richard
    Liu, Hsichang
    Ramachandran, Koushik
    Lin, Wei
    Winste, Kevin
    Kohara, Sayuri
    Sueoka, Kuniaki
    Angyal, Matthew
    Graves-Abel, Troy
    Berger, Daniel
    Knickerbocker, John
    Iyer, Subramanian
    2014 IEEE 64TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2014, : 647 - 654
  • [25] Low Temperature Hybrid Wafer Bonding for 3D Integration
    Damian, A. A.
    Poelma, R. H.
    van Zeijl, H. W.
    Zhang, G. Q.
    2013 14TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2013,
  • [26] Low temperature wafer-level bonding for hermetic packaging of 3D microsystems
    Tan, C. S.
    Fan, J.
    Lim, D. F.
    Chong, G. Y.
    Li, K. H.
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2011, 21 (07)
  • [27] Structural Design, Process, and Reliability of a Wafer-Level 3D Integration Scheme with Cu TSVs Based on Micro-bump/Adhesive Hybrid Wafer Bonding
    Ko, C. T.
    Hsiao, Z. C.
    Chang, Y. J.
    Chen, P. S.
    Huang, J. H.
    Fu, H. C.
    Huang, Y. J.
    Chiang, C. W.
    Lee, C. K.
    Chang, H. H.
    Tsai, W. L.
    Chen, Y. H.
    Lo, W. C.
    Chen, K. N.
    2012 IEEE 62ND ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2012, : 1 - 7
  • [28] Evaluation of Cu/SnAg microbump bonding processes for 3D integration using wafer-level underfill film
    Yang, Tsung-Fu
    Kao, Kuo-Shu
    Cheng, Ren-Chin
    Chang, Jing-Yao
    Zhan, Chau-Jie
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2012, 24 (04) : 287 - 293
  • [29] Wafer-level bonding and direct electrical interconnection of stacked 3D MEMS by a hybrid low temperature process
    Kuehne, S.
    Hierold, C.
    SENSORS AND ACTUATORS A-PHYSICAL, 2011, 172 (01) : 341 - 346
  • [30] The Influence of Device Morphology on Wafer-Level Bonding with Polymer-Coated Layer
    Liang, Hao-Wen
    Chen, Hsiu-Chi
    Lin, Chien-Hung
    Lee, Chia-Lin
    Yang, Shan-Chun
    Chen, Kuan-Neng
    2016 IEEE INTERNATIONAL 3D SYSTEMS INTEGRATION CONFERENCE (3DIC), 2016,
12345