Open CNC System for Winding Machines

被引：0

作者：

Tao, Jianhua ^{[1
]}

Liu, Hua ^{[1
]}

Liu, Xiaochu ^{[1
]}

机构：

[1] Guangzhou Univ, Sch Mech & Elect, Guangzhou 510006, Guangdong, Peoples R China

来源：

ADVANCED DESIGN TECHNOLOGY, PTS 1-3 | 2011年 / 308-310卷

关键词：

Open; Winding machines; CNC system; High precision and high speed;

D O I：

10.4028/www.scientific.net/AMR.308-310.2243

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper introduces a new open CNC system for winding machines which can overcome the shortcomings the traditional winding machine existed, such as the low control-accuracy, the low speed and the poor quality of its product. The system takes Microprocessor MC68HC000 as the core and its working mode is centralized control and time-sharing processing. The highest drive pulse of the system reaches 500 KPPS and the drive aufloesung can be as high as 0.001mna/Pulse. So, the system software, together with the winding machines' development kits and operating software, can provide an open design platform of the controller for the winding machine, and it may cater to the market's needs for winding machines.

引用

页码：2243 / 2246

页数：4

共 50 条

[1] HP develops open controller for CNC machines
不详
MACHINE DESIGN, 1996, 68 (21) : 38 - &
[2] Research on Filament Composite Winding CNC/TCS Integration System Based on Open-architecture
Wang Shihuan
Gao Jun
MANUFACTURING SCIENCE AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 443-444 : 225 - 228
[3] Comparison between star winding and open-end winding induction machines
Guizani, Sami
Nayli, Abdelmonoem
Ben Ammar, Faouzi
ELECTRICAL ENGINEERING, 2016, 98 (03) : 219 - 232
[4] Comparison between star winding and open-end winding induction machines
Sami Guizani
Abdelmonoem Nayli
Faouzi Ben Ammar
Electrical Engineering, 2016, 98 : 219 - 232
[5] Intellectual Control System of Processing on CNC Machines
Nekrasov, R. Y.
Lasukov, A. A.
Starikov, A. I.
Soloviev, I. V.
Bekareva, O. V.
INTERNATIONAL SCIENTIFIC AND PRACTICAL CONFERENCE ON URGENT PROBLEMS OF MODERN MECHANICAL ENGINEERING, 2016, 127
[6] System identification and control analysis for CNC machines
Sabau, Dora
Dobra, Mirela
2018 IEEE INTERNATIONAL CONFERENCE ON AUTOMATION, QUALITY AND TESTING, ROBOTICS (AQTR), 2018,
[7] Monitoring system for CNC-turning machines
Dulich, W.
Haba, E.
Feingeratetechnik Berlin, 1988, 37 (09): : 409 - 413
[8] The research of an intelligent open CNC system
Zhang, J
Wang, LS
Li, S
Zhang, FH
INITIATIVES OF PRECISION ENGINEERING AT THE BEGINNING OF A MILLENNIUM, 2001, : 779 - 783
[9] Application of FSM to open CNC system
School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China
Dongbei Daxue Xuebao, 2007, 8 (1174-1177):
[10] Comparison of switched-flux permanent magnet machines with non-overlapping concentrated winding for open-winding generator system
Wang, Yu
Deng, Zhiquan
IET ELECTRIC POWER APPLICATIONS, 2017, 11 (02) : 242 - 251

← 1 2 3 4 5 →