Influence of Si on stability of TiC in Al melts

被引：16

作者：

Ding Hai-min ^{[1
,2
]}

Liu Xiang-fa ^{[2
]}

机构：

[1] N China Elect Power Univ, Dept Mech Engn, Baoding 071003, Peoples R China

[2] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Peoples R China

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2011年 / 21卷 / 07期

基金：

中国国家自然科学基金;

关键词：

TiC; silicon; Al-Si alloy; stability; COMPOSITES;

D O I：

10.1016/S1003-6326(11)60882-0

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The influence of Si on the stability of TiC in Al melts was studied. It is found that TiC particles in Al melts become unstable with the addition of Si. When the melting temperature is below 890 degrees C, TiC will react with Al and Si to form TiAlxSiy and Al4C3 phases. But if the melt temperature is above 890 degrees C, TiC will react with Al and Si to form to Ti3SiC2 and Al4C3. It is considered that the influence of Si on the stability of TiC in Al melts is due to its incursion into TiC crystal lattice during the holding, which will cause serious lattice distortion in TiC and then speed up the out-diffusion of surrounded C atoms.

引用

页码：1465 / 1472

页数：8

共 50 条

[1] The stability and transformation of TiC with different stoichiometries in Cu-Si melts
Ding, Haimin
Wang, Xianlong
Liu, Qing
Wang, Jinfeng
Li, Chunyan
Zhang, Xinchun
MATERIALS & DESIGN, 2017, 135 : 232 - 238
[2] The Influence of Carbon Sources on the Microstructures of In Situ-Synthesized TiC in Al Melts
Ding, Haimin
Wu, Jiangmin
Jia, Haoran
Liu, Fang
Wang, Jinfeng
MATERIALS, 2022, 15 (13)
[3] Influence of Mg on reaction and properties of Al-Si/TiC nanocomposites
Pan, Shuaihang
Yuan, Jie
Jin, Kaiyuan
Murali, Narayanan
Gladstein, Aaron
Zeng, Yuxin
Taub, Alan
Li, Xiaochun
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 840
[4] The thermal stability of TiC particles in an Al7wt.%Si alloy
López, VH
Scoles, A
Kennedy, AR
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 356 (1-2): : 316 - 325
[5] Influence of the permeability of networked primary Si on the ejection of hypereutectic Al-Si melts by centrifugation
Ji Won Youn
Je-Beom Jeon
Jin Man Park
Seok Yong Seo
Jeon Taik Lim
Suk Jun Kim
Ki Young Kim
Metals and Materials International, 2017, 23 : 378 - 384
[6] Role of Si in the wetting of TiC by Al
Guo, Rui-Fen
Wang, Ya
Ma, Yun-Hai
Shen, Ping
JOURNAL OF MATERIALS SCIENCE, 2021, 56 (13) : 7791 - 7798
[7] Influence of the Permeability of Networked Primary Si on the Ejection of Hypereutectic Al-Si Melts by Centrifugation
Youn, Ji Won
Jeon, Je-Beom
Park, Jin Man
Seo, Seok Yong
Lim, Jeon Taik
Kim, Suk Jun
Kim, Ki Young
METALS AND MATERIALS INTERNATIONAL, 2017, 23 (02) : 378 - 384
[8] Role of Si in the wetting of TiC by Al
Rui-Fen Guo
Ya Wang
Yun-Hai Ma
Ping Shen
Journal of Materials Science, 2021, 56 : 7791 - 7798
[9] The in-situ synthesized of TiC in Al melts based on Ti-Si-diamond system and its morphologies
Ding, Haimin
Jia, Haoran
Chu, Weiwen
Liu, Qing
Chu, Kaiyu
Wang, Jinfeng
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (03): : 3865 - 3874
[10] STRUCTURE OF AL-SI MELTS
PASTUKHOV, EA
VATOLIN, NA
SERMIAGIN, VN
KERN, EM
DOKLADY AKADEMII NAUK SSSR, 1980, 254 (04): : 929 - 931

← 1 2 3 4 5 →