Numerical simulations of JET discharges with the ITER-like wall for different nitrogen seeding scenarios

被引:11
|
作者
Telesca, G. [1 ]
Ivanova-Stanik, I. [2 ]
Zagorski, R. [2 ]
Brezinsek, S. [3 ]
Czarnecka, A. [2 ]
Drewelow, P. [4 ]
Giroud, C. [5 ]
Marsen, S. [4 ]
Wischmeier, M. [6 ]
机构
[1] Univ Ghent, Dept Appl Phys, B-9000 Ghent, Belgium
[2] EURATOM IPPLM Assoc, Inst Plasma Phys & Laser Microfus, Warsaw, Poland
[3] Assoc EURATOM FZJ, IEK 4, FZ Julich GmbH, Julich, Germany
[4] EURATOM, Max Planck Inst Plasmaphys, D-17491 Greifswald, Germany
[5] EURATOM CCFE Fus Assoc, Abingdon OX14 3DB, Oxon, England
[6] EURATOM, Max Planck Inst Plasmaphys, D-8578 Garching, Germany
[7] JET EFDA, Culham Sci Ctr, Abingdon OX14 3DB, Oxon, England
关键词
COREDIV CODE;
D O I
10.1016/j.jnucmat.2014.11.024
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Two classes of nitrogen seeded pulses are here considered: pulses at high triangularity, high confinement with moderate gas puffing and N seeding rates and pulses at low triangularity, lower confinement with higher gas puffing and N seeding. For the high-delta pulses the power radiation fraction, f(rad), is normally about 0.5 while at low delta f f(rad) as high as 0.7 is achieved. For the simulations we have used COREDIV code, which self-consistently couples the plasma core with the plasma edge and the main plasma with impurities. To reproduce numerically the main experimental parameters of the two classes of pulses two different settings had to be applied to COREDIV, as the perpendicular transport and recycling in the SOL and the power deposition profile in the core. Simulations suggest that higher values for f(rad) might be achieved with N seeding only at low density and/or higher heating power. (C) 2014 Published by Elsevier B.V.
引用
收藏
页码:577 / 581
页数:5
相关论文
共 50 条
  • [21] PLASMA FACING MATERIALS FOR THE JET ITER-LIKE WALL
    Thomser, C.
    Bailescu, V.
    Brezinsek, S.
    Coenen, J. W.
    Greuner, H.
    Hirai, T.
    Linke, J.
    Lungu, C. P.
    Maier, H.
    Matthews, G.
    Mertens, Ph
    Neu, R.
    Philipps, V.
    Riccardo, V.
    Rubel, M.
    Ruset, C.
    Schmidt, A.
    Uytdenhouwen, I.
    FUSION SCIENCE AND TECHNOLOGY, 2012, 62 (01) : 1 - 8
  • [22] Overview of fuel inventory in JET with the ITER-like wall
    Widdowson, A.
    Coad, J. P.
    Alves, E.
    Baron-Wiechec, A.
    Barradas, N. P.
    Brezinsek, S.
    Catarino, N.
    Corregidor, V.
    Heinola, K.
    Koivuranta, S.
    Krat, S.
    Lahtinen, A.
    Likonen, J.
    Matthews, G. F.
    Mayer, M.
    Petersson, P.
    Rubel, M.
    Abduallev, S.
    Abhangi, M.
    Abreu, P.
    Afzal, M.
    Aggarwal, K. M.
    Ahlgren, T.
    Ahn, J. H.
    Aho-Mantila, L.
    Aiba, N.
    Airila, M.
    Albanese, R.
    Aldred, V.
    Alegre, D.
    Alessi, E.
    Aleynikov, P.
    Alfier, A.
    Alkseev, A.
    Allinson, M.
    Alper, B.
    Alves, E.
    Ambrosino, G.
    Ambrosino, R.
    Amicucci, L.
    Amosov, V.
    Sunden, E. Andersson
    Angelone, M.
    Anghel, M.
    Angioni, C.
    Appel, L.
    Appelbee, C.
    Arena, P.
    Ariola, M.
    Arnichand, H.
    NUCLEAR FUSION, 2017, 57 (08)
  • [23] Melt damage to the JET ITER-like Wall and divertor
    Matthews, G. F.
    Bazylev, B.
    Baron-Wiechec, A.
    Coenen, J.
    Heinola, K.
    Kiptily, V.
    Maier, H.
    Reux, C.
    Riccardo, V.
    Rimini, F.
    Sergienko, G.
    Thompson, V.
    Widdowson, A.
    Abhangi, M.
    Abreu, P.
    Aftanas, M.
    Afzal, M.
    Aggarwal, K. M.
    Aho-Mantila, L.
    Ahonen, E.
    Aints, M.
    Airila, M.
    Albanese, R.
    Alegre, D.
    Alessi, E.
    Aleynikov, P.
    Alfier, A.
    Alkseev, A.
    Allan, P.
    Almaviva, S.
    Alonso, A.
    Alper, B.
    Alsworth, I.
    Alves, D.
    Ambrosino, G.
    Ambrosino, R.
    Amosov, V.
    Andersson, F.
    Andersson Sunden, E.
    Angelone, M.
    Anghel, A.
    Anghel, M.
    Angioni, C.
    Appel, L.
    Apruzzese, G.
    Arena, P.
    Ariola, M.
    Arnichand, H.
    Arnoux, G.
    Arshad, S.
    PHYSICA SCRIPTA, 2016, T167
  • [24] Fuel retention studies with the ITER-Like Wall in JET
    Brezinsek, S.
    Loarer, T.
    Philipps, V.
    Esser, H. G.
    Gruenhagen, S.
    Smith, R.
    Felton, R.
    Banks, J.
    Belo, P.
    Boboc, A.
    Bucalossi, J.
    Clever, M.
    Coenen, J. W.
    Coffey, I.
    Devaux, S.
    Douai, D.
    Freisinger, M.
    Frigione, D.
    Groth, M.
    Huber, A.
    Hobirk, J.
    Jachmich, S.
    Knipe, S.
    Krieger, K.
    Kruezi, U.
    Marsen, S.
    Matthews, G. F.
    Meigs, A. G.
    Nave, F.
    Nunes, I.
    Neu, R.
    Roth, J.
    Stamp, M. F.
    Vartanian, S.
    Samm, U.
    NUCLEAR FUSION, 2013, 53 (08)
  • [25] Beryllium migration in JET ITER-like wall plasmas
    Brezinsek, S.
    Widdowson, A.
    Mayer, M.
    Philipps, V.
    Baron-Wiechec, P.
    Coenen, J. W.
    Heinola, K.
    Huber, A.
    Likonen, J.
    Petersson, P.
    Rubel, M.
    Stamp, M. F.
    Borodin, D.
    Coad, J. P.
    Carrasco, A. G.
    Kirschner, A.
    Krat, S.
    Krieger, K.
    Lipschultz, B.
    Linsmeier, Ch.
    Matthews, G. F.
    Schmid, K.
    Abhangi, M.
    Abreu, P.
    Aftanas, M.
    Afzal, M.
    Aggarwal, K. M.
    Aho-Mantila, L.
    Ahonen, E.
    Aints, M.
    Airila, M.
    Albanese, R.
    Alegre, D.
    Alessi, E.
    Aleynikov, P.
    Alfier, A.
    Alkseev, A.
    Allan, P.
    Almaviva, S.
    Alonso, A.
    Alper, B.
    Alsworth, I.
    Alves, D.
    Ambrosino, G.
    Ambrosino, R.
    Amosov, V.
    Andersson, F.
    Andersson Sunden, E.
    Angelone, M.
    Anghel, A.
    NUCLEAR FUSION, 2015, 55 (06)
  • [26] Global distribution of tritium in JET with the ITER-like wall
    Lee, S. E.
    Hatano, Y.
    Tokitani, M.
    Masuzaki, S.
    Oya, Y.
    Otsuka, T.
    Ashikawa, N.
    Torikai, Y.
    Asakura, N.
    Nakamura, H.
    Isobe, K.
    Kurotaki, H.
    Hamaguchi, D.
    Hayashi, T.
    Widdowson, A.
    Jachmich, S.
    Likonen, J.
    Rubel, M.
    NUCLEAR MATERIALS AND ENERGY, 2021, 26
  • [27] Automatic disruption classification in JET with the ITER-like wall
    Cannas, B.
    de Vries, P. C.
    Fanni, A.
    Murari, A.
    Pau, A.
    Sias, G.
    PLASMA PHYSICS AND CONTROLLED FUSION, 2015, 57 (12)
  • [28] Characterising dust in JET with the new ITER-like wall
    Flanagan, J. C.
    Sertoli, M.
    Bacharis, M.
    Matthews, G. F.
    de Vries, P. C.
    Widdowson, A.
    Coffey, I. H.
    Arnoux, G.
    Sieglin, B.
    Brezinsek, S.
    Coenen, J. W.
    Marsen, S.
    Craciunescu, T.
    Murari, A.
    Harting, D.
    Cackett, A.
    Hodille, E.
    PLASMA PHYSICS AND CONTROLLED FUSION, 2015, 57 (01)
  • [29] The second phase of JET operation with the ITER-like wall
    Matthews, G. F.
    Brezinsek, S.
    Chapman, I.
    Hobirk, J.
    Horton, L. D.
    Maggi, C.
    Nunes, I.
    Rimini, F. G.
    Sips, G.
    de Vries, P.
    PHYSICA SCRIPTA, 2014, T159
  • [30] Impact and mitigation of disruptions with the ITER-like wall in JET
    Lehnen, M.
    Arnoux, G.
    Brezinsek, S.
    Flanagan, J.
    Gerasimov, S. N.
    Hartmann, N.
    Hender, T. C.
    Huber, A.
    Jachmich, S.
    Kiptily, V.
    Kruezi, U.
    Matthews, G. F.
    Morris, J.
    Plyusnin, V. V.
    Reux, C.
    Riccardo, V.
    Sieglin, B.
    de Vries, P. C.
    NUCLEAR FUSION, 2013, 53 (09)