Experimental investigation of spur gear strength using photoelasticity

被引：8

作者：

Raptis, K. G. ^{[1
]}

Savaidis, A. A. ^{[1
]}

机构：

[1] Sch Pedag & Technol Educ, Dept Mech Engn Educators, Athens, Greece

来源：

1ST INTERNATIONAL CONFERENCE OF THE GREEK SOCIETY OF EXPERIMENTAL MECHANICS OF MATERIALS (GSEMM) | 2018年 / 10卷

关键词：

Spur gear strength; highest point of single tooth contact (HPSTC); lowest point of single tooth contact (LPSTC); polariscope;

D O I：

10.1016/j.prostr.2018.09.006

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this work, the maximum stresses, which are developed in the crucial toe section of spur gears being in contact and subjected to loading at the Highest Point of Single Tooth Contact (HPSTC), are numerically and experimentally studied. The results indicate that the deviation between the methods considered increase with increasing number of teeth of the gear, while the teeth number of the pinion remains constant. In addition it is shown that the deviations remain within acceptable limits. (C) 2018 The Authors. Published by Elsevier Ltd.

引用

页码：33 / 40

页数：8

共 50 条

[41] Experimental analysis of flow through external spur gear pumps
Vacca, Andrea
Casoli, Paolo
Greco, Michele
PROCEEDINGS OF THE SEVENTH INTERNATIONAL CONFERENCE ON FLUID POWER TRANSMISSION AND CONTROL, 2009, : 59 - 64
[42] Increasing the bending fatigue strength of carburized spur gear teeth by presetting
Pac. Northwest National Laboratory, Richland, WA 99352, United States
不详
不详
Int J Fatigue, 6 (549-556):
[43] Dynamic modeling, modification and experimental verification of spur gear with faults
Zhang, Baoqiang
Wang, Xin
Yan, Weijie
Luo, Huageng
Zhendong yu Chongji/Journal of Vibration and Shock, 2024, 43 (13): : 315 - 323
[44] Experimental Analysis of Spur Gear Pair With Geometrical and Operating Parameters
Raut, Achyut S.
Khot, S. M.
Salunkhe, Vishal G.
JOURNAL OF NONDESTRUCTIVE EVALUATION, DIAGNOSTICS AND PROGNOSTICS OF ENGINEERING SYSTEMS, 2024, 7 (03):
[45] Experimental research on on-line strengthing of involute spur gear
Cao Xingjin
Zheng jun
Wei Yunlong
Proceedings of the International Conference on Mechanical Transmissions, Vols 1 and 2, 2006, : 956 - 960
[46] Profile modification—a design approach for increasing the tooth strength in spur gear
Shanmugasundaram Sankar
Muthusamy Nataraj
The International Journal of Advanced Manufacturing Technology, 2011, 55 : 1 - 10
[47] STRENGTH EVALUATION OF POLYMER COMPOSITE SPUR GEAR BY FINITE ELEMENT ANALYSIS
Hossan, Mohammad Robiul
Hu, Zhong
IMECE2008: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 4: DESIGN AND MANUFACTURING, 2009, : 65 - 72
[48] Design of Face Gear Drive with Spur Pinion and Experimental Test
Tong, Jinglin
Shen, Yunbo
Wang, Xiaobo
HISTORY OF MECHANICAL TECHNOLOGY AND MECHANICAL DESIGN, 2011, 42 : 408 - +
[49] Experimental Study of Linear Profile Modification in Spur Gear Leg
Pramono, Agus Sigit
Wikarta, Alief
Mu'iz, Fakhul
INTERNATIONAL JOURNAL OF TECHNOLOGY, 2024, 15 (03) : 665 - 676
[50] Experimental investigations of surface wear assessment of spur gear teeth
Amarnath, Muniyappa
Chandramohan, Sujatha
Seetharaman, Swarnamani
JOURNAL OF VIBRATION AND CONTROL, 2012, 18 (07) : 1009 - 1024

← 1 2 3 4 5 →