Effect of vibratory weld conditioning on valve residual stress and fracture toughness

被引：0
|
作者：
Lu, Qinghua [1 ]
Chen, Ligong [1 ]
Ni, Chunzhen [1 ]
机构：
[1] Shanghai Jiao Tong Univ, Sch Mat Sci & Engn, Shanghai 200030, Peoples R China
来源：
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS 2007, VOLS 1 AND 2 | 2007年
关键词：
vibratory weld conditioning; residual stress; fracture toughness;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
In the present work the effects of vibratory weld conditioning (VWC) on residual stress and fracture toughness of full welded valve have been investigated. The experiment results show that vibration reduces residual deformation and stress generally. Fracture test is carried out using single edge notch bend (SENB) specimens. The fracture surfaces of failed weld metal (WM) specimens are characterized by dimple-like structures. The depth and density of these dimples increase with vibration applied in welding. While the fracture characteristic of the heat-affected zone (HAZ) is river marking, indicating brittle fracture mode. The possible solidification behaviour in VWC is discussed in this paper.
引用
收藏
页码：1044 / 1048
页数：5
相关论文
共 50 条
  • [31] WELD RESIDUAL STRESS INPUTS FOR A PROBABILISTIC FRACTURE MECHANICS CODE
    Benson, Michael L.
    Brust, Frederick W.
    Kurth, Robert E.
    ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2014, VOL 6B, 2014,
  • [32] RESIDUAL STRESS AND FRACTURE TOUGHNESS OF PIRAC TITANIUM NITRIDE COATINGS
    Wu, Siyuan
    Zhang, Guoyun
    Wu, Shoujun
    Su, Yu
    SURFACE REVIEW AND LETTERS, 2017, 24 (04)
  • [33] Effect of weld residual stress on fatigue strength
    Manai, Asma (asma.manai@chalmers.se), 1600, John Wiley and Sons Inc (04): : 2 - 4
  • [34] Effects of vibratory weld conditioning and wind cooling method on the residual stresses and transverse contraction distortion in multipass welding
    Xu, JJ
    Chen, LG
    Ni, CZ
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS 2005, VOLS 1 AND 2, 2005, : 1228 - 1231
  • [35] EFFECT OF LOADING RATE ON THE FRACTURE-TOUGHNESS OF STEEL WELD METALS
    DEANS, WF
    SAID, MNM
    RES MECHANICA, 1989, 28 (1-4): : 251 - 267
  • [36] EFFECT OF WELD STRENGTH MISMATCH AND WELD WIDTH ON THE FRACTURE TOUGHNESS DETERMINED FROM SENB SPECIMENS
    Moore, Philippa L.
    Garban, Natalia
    Bastid, Philippe
    Hughes, Kevin
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A, 2019,
  • [37] Effect of weld metal mismatch on joint efficiency and measured fracture toughness
    Yee, R
    Malik, L
    Morrison, J
    FATIGUE AND FRACTURE MECHANICS: 28TH VOL, 1997, 1321 : 450 - 468
  • [38] The effect of microstructure on the fracture toughness of a C-Mn weld metal
    Wenman, MR
    Novovic, M
    Bowen, P
    ADVANCES IN MECHANICAL BEHAVIOUR, PLASTICITY AND DAMAGE, VOLS 1 AND 2, PROCEEDINGS, 2000, : 1421 - 1426
  • [39] THE EFFECT OF STRESS CORROSION ON THE FRACTURE TOUGHNESS OF STEEL
    Gajdos, L'ubomir
    Sperl, Martin
    25TH DANUBIA-ADRIA SYMPOSIUM ON ADVANCES IN EXPERIMENTAL MECHANICS, 2008, : 73 - 74
  • [40] Probabilistic treatment of pipe girth weld residual stress in fracture assessment
    Weltevreden, Matthew
    Hadley, Isabel
    Coules, Harry
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2021, 192
12345