Study of aerosol jet printing with dry nanoparticles synthesized by spark discharge

被引：4
|
作者：
Efimov, A. A. [1 ]
Arsenov, P. V. [1 ]
Volkov, I. A. [1 ]
Urazov, M. N. [1 ]
Ivanov, V. V. [1 ]
机构：
[1] Moscow Inst Phys & Technol, Dept Phys & Quantum Elect, Dolgoprudnyi 141700, Russia
来源：
4TH INTERNATIONAL SCHOOL AND CONFERENCE ON OPTOELECTRONICS, PHOTONICS, ENGINEERING AND NANOSTRUCTURES (SAINT PETERSBURG OPEN 2017) | 2017年 / 917卷
基金：
俄罗斯科学基金会;
关键词：
D O I：
10.1088/1742-6596/917/9/092020
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A new method of aerosol jet printing utilizing dry (solvent-free) airborne nanoparticles generated by spark discharge is proposed. This method was applied to fabricate thin conducting lines (60-160 mu m) composed of silver nanoparticles on the surface of glass substrates. It has been demonstrated that the line width is determined by a sheath flow rate, while its thickness and cross-sectional area can be scaled up by a number of printing runs. The resistivity of printed lines after the annealing was found to be five times higher than that of bulk silver that is attributed to the porosity and the interparticle contact resistance. The proposed method holds promise for the application in technologies of printed electronics.
引用
收藏
页数：4
相关论文
共 50 条
  • [41] Digital Aerosol Jet Printing for the Fabrication of Terahertz Metamaterials
    Jahn, David
    Eckstein, Ralph
    Schneider, Lorenz Maximilian
    Born, Norman
    Hernandez-Sosa, Gerardo
    Balzer, Jan C.
    Al-Naib, Ibraheem
    Lemmer, Uli
    Koch, Martin
    ADVANCED MATERIALS TECHNOLOGIES, 2018, 3 (02):
  • [42] Understanding effects of printhead geometry in aerosol jet printing
    Tafoya, Rebecca R.
    Secor, Ethan B.
    FLEXIBLE AND PRINTED ELECTRONICS, 2020, 5 (03):
  • [43] Aerosol Jet Printing for the Manufacture of Soft Robotic Devices
    Wilkinson, Nathan J.
    Lukic-Mann, Maria
    Shuttleworth, Matthew P.
    Kay, Robert W.
    Harris, Russell A.
    2019 2ND IEEE INTERNATIONAL CONFERENCE ON SOFT ROBOTICS (ROBOSOFT 2019), 2019, : 496 - 501
  • [44] Metal aerosol jet printing for solar cell metallization
    Mette, A.
    Richter, P. L.
    Horteis, M.
    Glunz, S. W.
    PROGRESS IN PHOTOVOLTAICS, 2007, 15 (07): : 621 - 627
  • [45] Aerosol jet printing of biological inks by ultrasonic delivery
    Williams, Nicholas X.
    Watson, Nathan
    Joh, Daniel Y.
    Chilkoti, Ashutosh
    Franklin, Aaron D.
    BIOFABRICATION, 2020, 12 (02)
  • [46] Direct Printing of Circuit Boards Using Aerosol Jet®
    Christenson, Kurt K.
    Paulsen, Jason A.
    Renn, Michael J.
    McDonald, Kelley
    Bourassa, Justin
    DIGITAL FABRICATION 2011/ NIP27- 27TH INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES: TECHNICAL PROGRAMS AND PROCEEDINGS, 2011, 2011, : 433 - 436
  • [47] Aerosol Jet Printing For Printed Electronics Rapid Prototyping
    Gupta, Anubha A.
    Bolduc, Antoine
    Cloutier, Sylvain G.
    Izquierdo, Ricardo
    2016 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS (ISCAS), 2016, : 866 - 869
  • [48] Aerosol Jet Printing of Conductive Patterns on Paper Substrate
    Chen, Yi-Dan
    Zhou, Wenshen
    Yu, Wenwei
    Huang, Shao Ying
    PROCEEDINGS OF THE 2020 IEEE INTERNATIONAL CONFERENCE ON COMPUTATIONAL ELECTROMAGNETICS (ICCEM 2020), 2020, : 126 - 127
  • [49] Aerosol Jet printing head for printed microscale electronics
    Krzeminski, Jakub
    Skarzynski, Kacper
    Wroblewski, Grzegorz
    Janczak, Daniel
    Dybowska-Sarapuk, Lucja
    Lepak, Sandra
    Pavlov, Krystian
    Sloma, Marcin
    Jakubowska, Malgorzata
    PHOTONICS APPLICATIONS IN ASTRONOMY, COMMUNICATIONS, INDUSTRY, AND HIGH-ENERGY PHYSICS EXPERIMENTS 2018, 2018, 10808
  • [50] Aerosol Jet Printing of Strain Sensors for Soft Robotics
    Karipoth, Prakash
    Chandler, James H.
    Lee, Jaemin
    Taccola, Silvia
    Macdonald, James
    Valdastri, Pietro
    Harris, Russell A.
    ADVANCED ENGINEERING MATERIALS, 2024, 26 (01)
12345