sunflower seed oil;
transesterification;
in situ;
biodiesel;
ultrasonication;
kinetics;
D O I:
10.1016/j.fuproc.2007.10.004
中图分类号:
O69 [应用化学];
学科分类号:
081704 ;
摘要:
In the present work the alkaline transesterification of sunflower seed oil with methanol and ethanol, for the production of biodiesel fuel was studied. Both conventional and in situ transesterification were investigated using low frequency ultrasonication (24 kHz) and mechanical stirring (600 rpm). Use of ultrasonication in conventional transesterification with methanol gave high yields of methyl esters (95%) after a short reaction time (20 min) similar to those using mechanical stirring. Use of ultrasonication in conventional transesterification with ethanol gave similar yields to those using mechanical stirring but significantly lower than respective yields using methanol. In the in situ transesterification the use of ultrasonication and mechanical stirring led to similar high yields (95%) of methyl esters after approximately 20 min of reaction time. In the presence of ethanol use of ultrasonication led to high ester yields (98%) in only 40 min of reaction time while use of mechanical stirring gave lower yields (88%) even after 4 h of reaction time. In situ transesterification gave similar ester yields to those obtained by conventional transesterification being an alternative, efficient and economical process. In all cases a concentration of 2.0% NaOH gave higher ester yields. Reaction rate constants were calculated, using first order reaction kinetics, to be equal to 3.1 x 10(-3) s(-1) for conventional transesterification using methanol and 2.0% NaOH, and 9.5 x 10(-4) s(-1) using ethanol. (C) 2007 Elsevier B.V. All rights reserved.
PRES 2012: 15TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION,
2012,
29
: 1153
-
1158
机构:
Inst Teknol Sumatera ITERA, Mech Engn Study Program, South Lampung 35365, Lampung, IndonesiaInst Teknol Sumatera ITERA, Mech Engn Study Program, South Lampung 35365, Lampung, Indonesia
Riayatsyah, Teuku Meurah Indra
论文数: 引用数:
h-index:
机构:
Thaib, Razali
Silitonga, Arridina Susan
论文数: 0引用数: 0
h-index: 0
机构:
Politekn Negeri Medan, Dept Mech Engn, Medan 20155, IndonesiaInst Teknol Sumatera ITERA, Mech Engn Study Program, South Lampung 35365, Lampung, Indonesia
Silitonga, Arridina Susan
Milano, Jassinnee
论文数: 0引用数: 0
h-index: 0
机构:
Univ Tenaga Nas, Coll Engn, Dept Mech Engn, Kajang 43000, Selangor, MalaysiaInst Teknol Sumatera ITERA, Mech Engn Study Program, South Lampung 35365, Lampung, Indonesia
Milano, Jassinnee
Shamsuddin, Abd. Halim
论文数: 0引用数: 0
h-index: 0
机构:
Univ Tenaga Nas, Coll Engn, Dept Mech Engn, Kajang 43000, Selangor, MalaysiaInst Teknol Sumatera ITERA, Mech Engn Study Program, South Lampung 35365, Lampung, Indonesia
Shamsuddin, Abd. Halim
Sebayang, Abdi Hanra
论文数: 0引用数: 0
h-index: 0
机构:
Politekn Negeri Medan, Dept Mech Engn, Medan 20155, IndonesiaInst Teknol Sumatera ITERA, Mech Engn Study Program, South Lampung 35365, Lampung, Indonesia
Sebayang, Abdi Hanra
Rahmawaty
论文数: 0引用数: 0
h-index: 0
机构:
Politekn Negeri Medan, Dept Mech Engn, Medan 20155, IndonesiaInst Teknol Sumatera ITERA, Mech Engn Study Program, South Lampung 35365, Lampung, Indonesia
Rahmawaty
Sutrisno, Joko
论文数: 0引用数: 0
h-index: 0
机构:
Politekn Negeri Medan, Dept Mech Engn, Medan 20155, IndonesiaInst Teknol Sumatera ITERA, Mech Engn Study Program, South Lampung 35365, Lampung, Indonesia
Sutrisno, Joko
Mahlia, Teuku Meurah Indra
论文数: 0引用数: 0
h-index: 0
机构:
Univ Technol Sydney, Fac Engn & Informat Technol, Sch Informat Syst & Modelling, Sydney, NSW 2007, AustraliaInst Teknol Sumatera ITERA, Mech Engn Study Program, South Lampung 35365, Lampung, Indonesia