Fracture mechanics analysis of low cost solder bumped flip chip assemblies with imperfect underfills

被引：15
|
作者：
Lau, JH [1 ]
Lee, SWR [1 ]
机构：
[1] Express Packaging Syst Inc, Palo Alto, CA 94303 USA
来源：
JOURNAL OF ELECTRONIC PACKAGING | 2000年 / 122卷 / 04期
关键词：
D O I：
10.1115/1.1289998
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Solder joint reliability of flip chip on various thickness of printed circuit board with imperfect underfill is presented in this study. Emphasis is placed on the determination of the temperature-dependent stress and plastic strain at the corner solder joint with different crack (delamination) lengths. Also, the strain energy release rate and phase angle at the crack tip of the interface between the underfill and solder mask are obtained by fracture mechanics.
引用
收藏
页码：306 / 310
页数：5
相关论文
共 50 条
  • [1] Failure analysis of solder bumped flip chip on low-cost substrates
    Lan, JH
    Chang, CCP
    Lee, SWR
    IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, 2000, 23 (01): : 19 - 27
  • [2] Characteristics and reliability of no-flow underfills for solder bumped flip chips on low cost substrates
    Lau, JH
    Chang, C
    Chen, CC
    1999 INTERNATIONAL SYMPOSIUM ON MICROELECTRONICS, PROCEEDINGS, 1999, 3906 : 439 - 449
  • [3] Cost analysis: Solder bumped flip chip verses wire bonding
    Lau, J
    Chen, R
    TWENTY THIRD IEEE/CPMT INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY SYMPOSIUM, 1998, : 464 - 472
  • [4] Cost analysis: Solder bumped flip chip versus wire bending
    Lau, JH
    IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, 2000, 23 (01): : 4 - 11
  • [5] Low cost solder bumped flip chip MCM-L demonstration
    Kelly, M.
    Lau, J.
    Circuit World, 1995, 21 (04) : 14 - 17
  • [6] Characteristics and reliability of fast-flow, snap-cure, and reworkable underfills for solder bumped flip chip on low-cost substrates
    Lau, JH
    Chang, C
    IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, 2002, 25 (03): : 231 - 239
  • [7] No-flow underfill for solder bumped flip chip on low-cost substrates
    Lau, John H.
    Chang, Chris
    Ouyang, Chien
    National Electronic Packaging and Production Conference-Proceedings of the Technical Program (West and East), 1999, 1 : 158 - 181
  • [8] Eutectic solder bumped flip chip development
    Akashi, T
    Chikai, T
    Hamano, T
    Yoshida, A
    Honma, S
    Aoki, H
    Miyata, M
    Ezawa, K
    Makita, T
    Miyaoka, M
    TWENTY FIRST IEEE/CPMT INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY SYMPOSIUM, 1997, : 319 - 325
  • [9] Low cost solder flip chip
    Rinne, Glenn A.
    Magill, Paul A.
    Proceedings of the International Symposium and Exhibition on Advanced Packaging Materials Processes, Properties and Interfaces, 1997, : 113 - 114
  • [10] Low cost solder flip chip
    Rinne, GA
    Magill, PA
    3RD INTERNATIONAL SYMPOSIUM ON ADVANCED PACKAGING MATERIALS - PROCESSES, PROPERTIES, AND INTERFACES - PROCEEDINGS, 1997, : 113 - 114
12345