Effect of La0.8Ca0.2Cr0.9Co0.1O3-δ infiltration on the LCCC-YSZ layer as an interconnector material in solid oxide fuel cells

被引：2

作者：

Lee, Ho-Chang ^{[1
]}

Lee, Jiwon ^{[1
]}

Lee, Jung-A ^{[1
]}

Heo, Young-Woo ^{[1
]}

Lee, Joon-Hyung ^{[1
]}

Kim, Jeong-Joo ^{[1
]}

机构：

[1] Kyungpook Natl Univ, Sch Mat Sci & Engn, Daegu 41566, South Korea

来源：

JOURNAL OF CERAMIC PROCESSING RESEARCH | 2020年 / 21卷 / 02期

关键词：

Sintering; Ceramics; Interconnector; Sol-gel preparation; Infiltration; STAINLESS-STEEL SUBSTRATE; DOPED LANTHANUM CHROMITE; COATING LAYER;

D O I：

10.36410/jcpr.2020.21.2.208

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Full densification of the interconnector La0.8Ca0.2Cr0.9Co0.1O3-delta (LCCC) layer is hardly achieved when it is screen-printed and cofired on a pre-sintered NiO-YSZ (yttria-stabilized zirconia, 8YSZ) substrate. In this study, the LCCC precursors with different concentrations and viscosities were prepared and infiltrated into the LCCC-YSZ layer. The phase development process and densification behavior of the LCCC were analyzed, and the optimum conditions for full densification are suggested. Through the research, we propose a method for manufacturing a dense LCCC interconnector layer.

引用

页码：208 / 212

页数：5

共 50 条

[1] Performance of La0.1Sr0.9Co0.8Fe0.2O3-δ and La0.1Sr0.9Co0.8Fe0.2O3-δ-Ce0.9Gd0.1O2 oxygen electrodes with Ce0.9Gd0.1O2 barrier layer in reversible solid oxide fuel cells
Choi, Moon-Bong
Singh, Bhupendra
Wachsman, Eric D.
Song, Sun-Ju
JOURNAL OF POWER SOURCES, 2013, 239 : 361 - 373
[2] Adhesion behavior between yttrium-stabilized zirconia added La0.8Ca0.2Cr0.9Co0.1O3-δ interconnector and yttrium-stabilized zirconia-based substrate
Lee, Ho-Chang
Kang, Bo-Kyung
Lee, Joon-Hyung
Heo, Young-Woo
Kim, Jae-Yuk
Kim, Jeong-Joo
CERAMICS INTERNATIONAL, 2013, 39 (08) : 8737 - 8741
[3] Transient Liquid Phase Sintering of LCCC(La0.8Ca0.2Cr0.9Co0.1O3-delta) with the Addition of CaCrO4
Lee, Ho-Chang
Kang, Bo-Kyung
Lee, Joon-Hyung
Heo, Young-Woo
Kim, Jae Yuk
Kim, Jeong-Joo
JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2012, 49 (02) : 197 - 203
[4] Composite cathodes of La0.9Ca0.1Ni0.5Co0.5O3-Ce0.8Sm0.2O1.9 for solid oxide fuel cells
Fu, Yen-Pei
Tsai, Feng-Yi
CERAMICS INTERNATIONAL, 2011, 37 (01) : 231 - 239
[5] Improvements in oxidation resistance and conductivity of Fe-Cr metallic interconnector by (La0.8Ca0.2)(Cr0.9Co0.1)O3 coating
Chang-Hyun Park
Kyeong-Ho Baik
Metals and Materials International, 2014, 20 : 63 - 67
[6] Improvements in oxidation resistance and conductivity of Fe-Cr metallic interconnector by (La0.8Ca0.2)(Cr0.9Co0.1)O3 coating
Park, Chang-Hyun
Baik, Kyeong-Ho
METALS AND MATERIALS INTERNATIONAL, 2014, 20 (01) : 63 - 67
[7] Electrochemical performance of La0.9Sr0.1Co0.8Ni0.2O3-δ-Ce0.8Sm0.2O1.9 composite cathode for solid oxide fuel cells
Fu, Yen-Pei
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2011, 36 (09) : 5574 - 5580
[8] La0.8Sr0.2MnO3-La0.9Sr0.1Ga0.8Mg0.2O3 composite cathodes for anode supported solid oxide fuel cells
Armstrong, TJ
Prouse, DW
Virkar, AV
IONIC AND MIXED CONDUCTING CERAMICS IV, 2002, 2001 (28): : 319 - 327
[9] Operational Inhomogeneities in La0.9Sr0.1Ga0.8Mg0.2O3-δ Electrolytes and La0.8Sr0.2Cr0.82Ru0.18O3-δ-Ce0.9Gd0.1O2-δ Composite Anodes for Solid Oxide Fuel Cells
Liao, Y.
Bierschenk, D. M.
Barnett, S. A.
Marks, L. D.
FUEL CELLS, 2011, 11 (05) : 635 - 641
[10] La0.9Sr0.1Ga0.8Mg0.2O3-δ-La0.6Sr0.4Co0.2Fe0.8O3-θ composite cathodes for intermediate-temperature solid oxide fuel cells
Lin, Yuanbo
Barnett, Scott A.
SOLID STATE IONICS, 2008, 179 (11-12) : 420 - 427

← 1 2 3 4 5 →