Evaluation of Strength and Microstructural Properties of Heat Treated High-Molybdenum Content Maraging Steel

被引:5
|
作者
Seikh, Asiful H. [1 ]
Halfa, Hossam [2 ,3 ]
Soliman, Mahmoud S. [4 ]
机构
[1] King Saud Univ, CEREM, Sci Res, POB 800, Riyadh 11421, Saudi Arabia
[2] Cent Met R&D Inst CMRDI, Steel Technol Dept, POB 87, Helwan 11731, Egypt
[3] Shaqra Univ, Dept Phys, Coll Sci, Shaqra 15556, Saudi Arabia
[4] King Saud Univ, Dept Mech Engn, Coll Engn, POB 800, Riyadh 11421, Saudi Arabia
关键词
maraging steel; electroslag refining process; heat treatment; DSC analysis; EBSD; TEM; MECHANICAL-PROPERTIES; AUSTENITE REVERSION; REVERTED AUSTENITE; LATH MARTENSITE; PRECIPITATION; BEHAVIOR; TEMPERATURE; NI; QUANTIFICATION; TRANSFORMATION;
D O I
10.3390/cryst11121446
中图分类号
O7 [晶体学];
学科分类号
0702 ; 070205 ; 0703 ; 080501 ;
摘要
Effect of high molybdenum content ~10% as an alloying element on the strength and microstructural properties of 11% nickel-1.25% titanium maraging steel was evaluated. To increase the homogeneity and cleanliness of produced ingot, the investigated steel sample was produced by melting the raw material in an open-air induction melting furnace followed by refining utilizing a direct current electro-slag refining machine. The produced steel samples were both forged and heat-treated in optimum condition to acquire the full capacity of mechanical properties especially the tensile properties. After Forging and heat treatment at optimum condition, steel samples were evaluated by optical microscopy (OM), X-ray diffraction (XRD), differential scanning calorimetry (DSC) analysis, electron backscattering diffraction (EBSD), and transmission electron microscopy (TEM). The experimental data showed that this steel sample has ultimate strength ~2100 MPa and elongation around 14%. High tensile properties obtained may be attributed on one hand due to the presence of high alloying lamellar martensite phase and lamellar austenite phase which has high dislocation intensity, and on the other hand, due to the high homogeneity and cleanliness of investigated samples from large nonmetallic inclusions. The results also show that a high amount of intermetallic compounds (NiMo3 and NiTi3) which are completely round and have a very low size not more than hundred nanometers.
引用
收藏
页数:16
相关论文
共 50 条
  • [41] EFFECT OF HEAT TREATMENT ON THE MECHANICAL PROPERTIES OF MARAGING STEEL.
    Abramov, O.V.
    Il'in, A.I.
    Kardonskii, V.M.
    Metal Science and Heat Treatment (English Translation of Metallovedenie i Termicheskaya Obrabotka, 1983, 25 (3-4): : 298 - 301
  • [42] Microstructural evaluation of hydrogen embrittlement and successive recovery in advanced high strength steel
    Allen, Quentin S.
    Nelson, Tracy W.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 265 : 12 - 19
  • [43] FRACTURE BEHAVIOUR OF MARAGING NICKEL-COBALT-MOLYBDENUM STEELS OF HIGH STRENGTH
    SCHMEER, E
    KOHLER, J
    KLINGELE, H
    ARCHIV FUR DAS EISENHUTTENWESEN, 1971, 42 (07): : 489 - &
  • [44] Laser powder bed fusion of high-strength maraging steel with concurrently enhanced strength and ductility after heat treatments
    Song, Jun
    Tang, Qian
    Chen, Hao
    Zhang, Zhiqing
    Feng, Qixiang
    Zhao, Mingqiang
    Ma, Shuai
    Setchi, Rossitza
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 854
  • [45] Effect of Heat Treatment on the Properties of a High Alloying Maraging Steel Fabricated by Laser Metal Deposition
    Linjun Jiang
    Changjun Chen
    Min Zhang
    Metals and Materials International, 2023, 29 : 141 - 156
  • [46] Microstructural evolution and properties of a high strength steel with different direct quenching processes
    Feng Lu
    Chao Wang
    Long Lü
    Zhao-dong Wang
    Guo-dong Wang
    Raja Devesh Kumar Misra
    Journal of Iron and Steel Research International, 2015, 22 : 344 - 351
  • [47] Microstructural Evolution and Properties of a High Strength Steel with Different Direct Quenching Processes
    Feng LU
    Chao WANG
    Long L
    Zhao-dong WANG
    Guo-dong WANG
    Raja Devesh Kumar MISRA
    Journal of Iron and Steel Research(International), 2015, 22 (04) : 344 - 351
  • [48] Microstructural Evolution and Properties of a High Strength Steel with Different Direct Quenching Processes
    Lu, Feng
    Wang, Chao
    Lu, Long
    Wang, Zhao-dong
    Wang, Guo-dong
    Misra, Raja Devesh Kumar
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2015, 22 (04) : 344 - 351
  • [49] Microstructural evolution and mechanical properties of an additively manufactured high-strength steel
    Zhang, Youzhao
    Zhang, Siyuan
    Li, Xiangwei
    Zhong, Yumei
    Zhang, Shuyan
    OPTICS AND LASER TECHNOLOGY, 2024, 172
  • [50] Effect of Heat Treatment on the Properties of a High Alloying Maraging Steel Fabricated by Laser Metal Deposition
    Jiang, Linjun
    Chen, Changjun
    Zhang, Min
    METALS AND MATERIALS INTERNATIONAL, 2023, 29 (01) : 141 - 156