Experimental Investigation of Rate-Dependent Hardening-Softening Behavior of Hot Mix Asphalt in Compression

被引:7
|
作者
Yun, Taeyoung [1 ]
Kim, Y. Richard [2 ]
机构
[1] Korea Inst Construct Technol, Highway Res Div, Goyang Si 411712, Gyeonggi Do, South Korea
[2] N Carolina State Univ, Dept Civil Construct & Environm Engn, Raleigh, NC 27695 USA
关键词
Rutting; Compression; Viscoplasticity; Aggregate Friction; Rate-Dependent Yield Stress; Softening;
D O I
10.3166/RMPD.12.99-114
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The characteristic behaviors of hot mix asphalt (HMA) in compression are studied using various repetitive creep and recovery tests. Important characteristic behaviors of HMA, i.e., rate-dependent hardening and softening, are observed from the experimental study. Rate-dependent softening is found to have a significant effect on viscoplastic strain development. The implication of this effect is that the flow number test, which has been developed as a simple performance test to supplement the Superpave volumetric mix design, is not sufficiently comprehensive to evaluate the viscoplastic characteristics of HMA pavement subjected to loadings with various rest periods. The experimental results and mathematical derivations suggest that for a more realistic prediction of the viscoplastic behavior of HMA, a hardening rule, which is capable of describing both rate-dependent hardening and softening, needs to be incorporated into viscoplastic models.
引用
收藏
页码:99 / 114
页数:16
相关论文
共 50 条
  • [21] Experimental characterisation of rate-dependent compression behaviour of fibre reinforced composites
    Pathan, Mehtab, V
    Erice, Borja
    Ponnusami, Sathiskumar A.
    Petrinic, Nik
    12TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING (DYMAT 2018), 2018, 183
  • [22] Evaluation of rate-dependent hardening behaviors of AHSS sheets with novel tension and compression test devices
    Joo, Geunsu
    Huh, Hoon
    Kwon, Junbeom
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 270 : 365 - 379
  • [23] Modeling of rate-dependent hardening behaviors of the TWIP980 steel sheet in tension and compression
    Joo, Geunsu
    Huh, Hoon
    INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, 207 : 143 - 148
  • [24] Abnormal Strain Rate-Dependent Work-Hardening Behavior in Quenching and Partitioning Steel
    Bisch, Max-Maria
    Fang, Xiangfan
    STEEL RESEARCH INTERNATIONAL, 2024, 95 (06)
  • [25] Experimental and numerical investigation of the properties of the Hot Mix Asphalt Concrete with basalt and glass fiber
    Ameri, Mahmoud
    Nemati, Mehdi
    Shaker, Hamid
    Jafari, Faezeh
    FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2019, 13 (50): : 149 - 162
  • [26] Non-linear, rate-dependent strain-hardening behavior of polymer glasses
    Wendlandt, M
    Tervoort, TA
    Suter, UW
    POLYMER, 2005, 46 (25) : 11786 - 11797
  • [27] Enhancement in the Modeling of Temperature and Strain Rate-Dependent Plastic Hardening Behavior of a Sheet Metal
    Leem, Dohyun
    Bong, Hyuk-Jong
    Barlat, Frederic
    Lee, Myoung-Gyu
    Song, Jung-Han
    Kim, Daeyong
    STEEL RESEARCH INTERNATIONAL, 2015, 86 (08) : 902 - 914
  • [28] PROBABILISTIC ASSESSMENT FOR CLAVICLE FRACTURE UNDER COMPRESSION LOADING: RATE-DEPENDENT BEHAVIOR
    Sanchez-Molina, David
    Garcia-Vilana, Silvia
    Velazquez-Ameijide, Juan
    Arregui-Dalmases, C.
    BIOMEDICAL ENGINEERING-APPLICATIONS BASIS COMMUNICATIONS, 2020, 32 (05):
  • [29] An experimental investigation of rate-dependent deformation and failure of three titanium alloys
    Helen Sarsfield
    Li Wang
    Nikica Petrinic
    Journal of Materials Science, 2007, 42 : 5085 - 5093
  • [30] An Experimental Investigation on the Strain Rate-dependent Tensile Strength of Plain Concretes
    Fu Y.
    Yu X.
    Dong X.
    Zhou F.
    Ning J.
    Li P.
    Binggong Xuebao/Acta Armamentarii, 2020, 41 (01): : 143 - 151