Low-Temperature Selective Catalytic Reduction DeNOX and Regeneration of Mn-Cu Catalyst Supported by Activated Coke

The activated coke is a promising support for catalysts, and it is important to study the performance of the activated coke catalyst on the removal of NOx. In the current research, a series of the activated coke-supported Mn-Cu catalysts are prepared by the incipient wetness impregnation method. The effects of the molar ration of Mn/Cu, the content of Mn-Cu, the calcination temperature, and reaction space velocity on NO conversion are investigated, and it was found that the 8 wt.% Mn0.7Cu0.3/AC had the best catalytic activity when the calcination temperature was 200 degrees C. The existence of SO2 caused the catalyst to deactivate, but the activity of the poisoning catalyst could be recovered by different regeneration methods. To uncover the underlying mechanism, BET, XPS, XRD, SEM and FTIR characterizations were performed. These results suggested that the specific surface area and total pore volume of the poisoning catalyst are recovered and the sulfite and sulfate on the surface of the poisoning catalysts are removed after water washing regeneration. More importantly, the water washing regeneration returns the value of Mn3+/Mn4+, Cu2+/Cu+, and O-alpha/O-beta, related to the activity, basically back to the level of the fresh catalyst. Thus, the effect of water washing regeneration is better than thermal regeneration. These results could provide some helpful information for the design and development of the SCR catalysts.