Prediction of Limb Joint Angles Based on Multi-Source Signals by GS-GRNN for Exoskeleton Wearer

被引:41
|
作者
Xie, Hualong [1 ]
Li, Guanchao [1 ]
Zhao, Xiaofei [1 ]
Li, Fei [2 ]
机构
[1] Northeastern Univ, Dept Mech Engn & Automat, Shenyang 110819, Peoples R China
[2] Shenyang Univ Technol, Dept Informat Sci & Engn, Shenyang 110870, Peoples R China
基金
美国国家科学基金会;
关键词
GS-GRNN; walking on level ground; joint angle prediction; sEMG signal; plantar pressure signal; error analysis;
D O I
10.3390/s20041104
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
To enable exoskeleton wearers to walk on level ground, estimation of lower limb movement is particularly indispensable. In fact, it allows the exoskeleton to follow the human movement in real time. In this paper, the general regression neural network optimized by golden section algorithm (GS-GRNN) is used to realize prediction of the human lower limb joint angle. The human body hip joint angle and the surface electromyographic (sEMG) signals of the thigh muscles are taken as the inputs of a neural network to predict joint angles of lower limbs. To improve the prediction accuracy in different gait phases, the plantar pressure signals are also added into the input. After that, the error between the prediction result and the actual data decreases significantly. Finally, compared with the prediction result of the BP neural network, GRNN shows splendid prediction performance for its less processing time and higher prediction accuracy.
引用
收藏
页数:16
相关论文
共 50 条
  • [31] Continuous online prediction of lower limb joints angles based on sEMG signals by deep learning approach
    Song, Qiuzhi
    Ma, Xunju
    Liu, Yali
    COMPUTERS IN BIOLOGY AND MEDICINE, 2023, 163
  • [32] Prediction of tourist flow based on multi-source traffic data in scenic spot
    Lu, Hao
    Zhang, Jianqin
    Xu, Zhijie
    Shi, Ruixuan
    Wang, Jiachuan
    Xu, Shishuo
    TRANSACTIONS IN GIS, 2021, 25 (02) : 1082 - 1103
  • [33] Distribution Transformer Failure Rate Prediction Model Based on Multi-Source Information
    Niu, Jincang
    Su, Jianjun
    Yang, Yi
    Cai, Yanan
    Liu, Hang
    2016 INTERNATIONAL CONFERENCE ON CONDITION MONITORING AND DIAGNOSIS (CMD), 2016, : 944 - 947
  • [34] Prediction Method of Cutting Loads of Shearers Based on Multi-source Data Fusion
    Yu N.
    Sun Y.
    Chen H.
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2021, 32 (10): : 1247 - 1253and1259
  • [35] State prediction of distributed parameter systems based on multi-source spatiotemporal information
    Mu, Guoqing
    Chen, Junghui
    Liu, Jingxiang
    Shao, Weiming
    Zhao, Dongya
    JOURNAL OF PROCESS CONTROL, 2022, 119 : 55 - 67
  • [36] Prediction of the Remaining Useful Life of a Switch Machine, Based on Multi-Source Data
    Zheng, Yunshui
    Chen, Weimin
    Zhang, Yaning
    Bai, Dengyu
    SUSTAINABILITY, 2022, 14 (21)
  • [37] Remaining useful life prediction based on multi-source information fusion and HMM
    Huang L.
    Gong L.
    Jiang W.
    Wang K.
    Xi Tong Gong Cheng Yu Dian Zi Ji Shu/Systems Engineering and Electronics, 2022, 44 (05): : 1747 - 1756
  • [38] EMRM: Enhanced Multi-source Review-Based Model for Rating Prediction
    Wang, Xiaochen
    Xiao, Tingsong
    Shao, Jie
    KNOWLEDGE SCIENCE, ENGINEERING AND MANAGEMENT, PT III, 2021, 12817 : 487 - 499
  • [39] New Energy Power Prediction and Warning Based on Multi-source Prediction and Scene Classification Recognition
    Wei, Ruizeng
    Hu, Siyu
    Yang, Fan
    Shi, Guorui
    Zhang, Daqian
    Zhang, Lintao
    Fang, Xu
    Tan, Xiao
    Huang, Junmin
    18TH INTERNATIONAL CONFERENCE ON FUTURE NETWORKS AND COMMUNICATIONS, FNC 2023/20TH INTERNATIONAL CONFERENCE ON MOBILE SYSTEMS AND PERVASIVE COMPUTING, MOBISPC 2023/13TH INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY INFORMATION TECHNOLOGY, SEIT 2023, 2023, 224 : 401 - 406
  • [40] Separating Multi-Source Partial Discharge Signals Using Linear Prediction Analysis and Isolation Forest Algorithm
    Wang, Yan-Bo
    Chang, Ding-Ge
    Qin, Shao-Rui
    Fan, Yu-Hang
    Mu, Hai-Bao
    Zhang, Guan-Jun
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2020, 69 (06) : 2734 - 2742