Effect of graphite content on the wear behavior of Al/2SiC/Gr hybrid nano-composites respectively in the ambient environment and an acidic solution

被引：49

作者：

Mosleh-Shirazi, S. ^{[1
]}

Akhlaghi, F. ^{[1
]}

Li, D. Y. ^{[2
]}

机构：

[1] Univ Tehran, Sch Met & Mat Engn, Coll Engn, POB 11155-4563, Tehran, Iran

[2] Univ Alberta, Dept Chem & Mat Engn, Edmonton, AB T6G 2V4, Canada

来源：

TRIBOLOGY INTERNATIONAL | 2016年 / 103卷

关键词：

Aluminum based hybrid nano-composites; Dry sliding wear; Solid-particle erosion; Corrosive wear; METAL-MATRIX COMPOSITES; SLURRY EROSIVE WEAR; BODY ABRASIVE WEAR; RICE-HUSK ASH; MECHANICAL-PROPERTIES; SLIDING WEAR; CORROSION BEHAVIOR; PARTICULATE COMPOSITES; TRIBOLOGICAL BEHAVIOR; PARTICLE-SIZE;

D O I：

10.1016/j.triboint.2016.08.016

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Effects of graphite (Gr) content on the dry sliding wear, solid-particle erosion and corrosive wear of Al6061based hybrid nano-composites fabricated via powder metallurgy route containing 2 vol% of SiC nano-particles and 0,2, 5 and 7vol%of micron-sized Gr particles were investigated. The hardness of these composites decreased almost linearly with their Gr content, accompanied with decreased erosion resistance at 90 degrees particle impingement. Also the conductive Gr particles as the micro-cathodes enhanced galvanic effect and resulted in an increase in the corrosion rate and thereby stronger corrosive wear of nano-composites. The Al6061/2SiC/2Gr nano-composite exhibited the minimum wear rate and friction coefficient. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：620 / 628

页数：9

共 50 条

[31] Effect of applied load and grit size on wear coefficients of Al 6082-SiC-Gr hybrid composites under two body abrasion
Kaushik, N. Ch.
Rao, R. N.
TRIBOLOGY INTERNATIONAL, 2016, 103 : 298 - 308
[32] Effect of graphite content on the microstructure and mechanical properties of Al5SiC-xCgr hybrid composites produced by powder metallurgy
Wasik, Anna
Leszczynska-Madej, Beata
Madej, Marcin
MRS COMMUNICATIONS, 2023, 13 (01) : 121 - 128
[33] Effect of graphite content on the microstructure and mechanical properties of Al5SiC-xCgr hybrid composites produced by powder metallurgy
Anna Wąsik
Beata Leszczyńska-Madej
Marcin Madej
MRS Communications, 2023, 13 : 121 - 128
[34] WEAR AND MECHANICAL PROPERTIES OF ALUMINUM ALLOY BASED HYBRID COMPOSITES [(SiC plus Gr) & (SiC+Al2O3)] FABRICATED BY FRICTION STIR PROCESSING
Kumar, A.
Devaraju, A.
Kotiveerachari, B.
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 2A, 2014,
[35] Influence of Rutile Nano TiO2 on Thrust Force, Mechanical, Wear and Microstructural Behavior of Al-SiC Composites
Kumar, N. Prem
Mani, N.
Palanikumar, K.
NANOSCIENCE AND NANOTECHNOLOGY LETTERS, 2019, 11 (11) : 1502 - 1512
[36] Effect of graphite content on wear property of graphite/Al2O3/Mg-9Al-1Zn-0.8Ce composites
张美娟
杨晓红
刘勇兵
曹占义
程丽任
裴亚利
Transactions of Nonferrous Metals Society of China, 2010, 20 (02) : 207 - 211
[37] Effect of graphite content on wear property of graphite/Al2O3/Mg-9Al-1Zn-0.8Ce composites
Zhang Mei-juan
Yang Xiao-hong
Liu Yong-bing
Cao Zhan-yi
Cheng Li-ren
Pei Ya-li
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 (02) : 207 - 211
[38] Mechanical and corrosion behavior of SiC/Graphite/ZrO2 hybrid reinforced aluminum-based composites for marine environment
Yadav, Sukriti
Gangwar, Swati
Yadav, Prabhat Chand
Pathak, Vimal Kumar
Sahu, Sandeep
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2021, 9 (04)
[39] The wear behavior of Al/(Al2O3 + SiC plus C) hybrid composites fabricated stir casting assisted squeeze
Kalra, C. S.
Kumar, Vinod
Manna, Alakesh
PARTICULATE SCIENCE AND TECHNOLOGY, 2019, 37 (03) : 303 - 313
[40] Material characterization of SiC and Al2O3-reinforced hybrid aluminum metal matrix composites on wear behavior
Rajesh, A. M.
Kaleemulla, Mohamed
Doddamani, Saleemsab
Bharath, K. N.
ADVANCED COMPOSITES LETTERS, 2019, 28

← 1 2 3 4 5 →