Plastic strip model of cracked weld joint with residual stresses

被引：2
|
作者：
Liu, QC [1 ]
机构：
[1] Univ Sydney, Ctr Adv Mat Technol, Dept Mech & Mechatron Engn, Sydney, NSW 2006, Australia
来源：
THEORETICAL AND APPLIED FRACTURE MECHANICS | 1998年 / 30卷 / 01期
关键词：
D O I：
10.1016/S0167-8442(98)00045-7
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effect of residual stresses on the fracture behavior of a cracked weld joint is studied by making use of the continuous dislocation formulation. Considered are the plastic zone length of the strip model zone and the opening displacement of a crack that is normal to both weld line and base metal boundary; they depend on the character of the yield stresses for the base metal (BM), weld material (WM), and heat affected zone (HAZ). The crack driving force is found to increase with the tensile residual stress while crack initiation and growth are suppressed if the residual stress is compressive. Moreover, the plastic zone and crack opening displacement are found to decrease linearly with the HAZ yield strength as the HAZ width is increased for HAZ yield strength greater than that of BM. (C) 1998 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：51 / 63
页数：13
相关论文
共 50 条
  • [41] Nondestructive test of weld residual stresses by acoustoelastic technique
    Jiao Fujie
    Zhang Wenjun and Yuan Zhikang (Shanghai University of Engineering Science)
    China Welding, 1994, (01) : 45 - 52
  • [42] Determination of the Residual Stresses in Weld Joints of Different Steels
    L. G. Onuchin
    L. A. Efimenko
    A. V. Sidorenko
    Chemical and Petroleum Engineering, 2001, 37 : 344 - 349
  • [43] On repair weld residual stresses and significance to structural integrity
    Pingsha Dong
    Welding in the World, 2018, 62 : 351 - 362
  • [44] Determination of the residual stresses in weld joints of different steels
    Onuchin, LG
    Efimenko, LA
    Sidorenko, AV
    CHEMICAL AND PETROLEUM ENGINEERING, 2001, 37 (5-6) : 344 - 349
  • [45] Residual stresses at weld repairs and effects of repair geometry
    Song, S.
    Dong, P.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2017, 22 (04) : 265 - 277
  • [46] Numerical weld modeling - a method for calculating weld-induced residual stresses
    Fricke, S
    Keim, E
    Schmidt, J
    NUCLEAR ENGINEERING AND DESIGN, 2001, 206 (2-3) : 139 - 150
  • [47] Hammering of Weld Seams Tranforms Residual Stresses.
    Peiter, Arnold
    Arm, Thomas
    Kuhn, Peter
    Baender Bleche Rohre, 1986, 27 (09): : 187 - 190
  • [48] Experimental evaluation of the effects of residual tensile stresses in the weld
    Welding and Surfacing Reviews, 3 (02):
  • [49] A strip yield model solution for an internally cracked piezoelectric strip
    R. R. Bhargava
    A. Setia
    Mechanics of Composite Materials, 2008, 44 : 451 - 464
  • [50] A STRIP YIELD MODEL SOLUTION FOR AN INTERNALLY CRACKED PIEZOELECTRIC STRIP
    Bhargava, R. R.
    Setia, A.
    MECHANICS OF COMPOSITE MATERIALS, 2008, 44 (05) : 451 - 464
12345