Strengthening and toughening effects in laves phase Cr2Ta/Cr in-situ composites by Si additions

被引：11

作者：

Xue, Yunlong ^{[1
]}

Li, Shuangming ^{[2
]}

Wu, Yuanting ^{[1
]}

Liu, Changqing ^{[1
]}

Liu, Hulin ^{[1
]}

Yuan, Liang ^{[3
]}

机构：

[1] Shaanxi Univ Sci & Technol, Sch Mat Sci & Engn, Shaanxi Key Lab Green Preparat & Functionalizat I, Xian 710021, Peoples R China

[2] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China

[3] Shaanxi Univ Sci & Technol, Coll Bioresources Chem & Mat Engn, Xian 710021, Peoples R China

来源：

VACUUM | 2020年 / 174卷

基金：

中国国家自然科学基金;

关键词：

Laves phase; Microstructure; Mechanical properties; Toughening; MECHANICAL-PROPERTIES; PLASTIC-DEFORMATION; OXIDATION BEHAVIOR; ALLOYS; MICROSTRUCTURE; TRANSFORMATIONS; NIAL-CR(MO); CR-CR2TA; FRACTURE;

D O I：

10.1016/j.vacuum.2020.109202

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Three Cr-8Ta-xSi (x = 0, 6, 10) (at.%) alloys were fabricated by vacuum non-consumable arc melting in this study to investigate the microstructure evolutions and mechanical properties of the Si-modified Cr2Ta/Cr in-situ composites. The element Si was incorporated preferentially into Cr2Ta rather than phase Cr, thus the microstructure transited from the dendrite Cr plus the eutectic Cr2Ta/Cr in the Cr-8Ta alloy, to the full eutectic Cr2Ta/Cr in the Cr-8Ta-6Si alloy, and finally to the dendrite Cr2Ta plus the eutectic Cr2Ta/Cr in the Cr-8Ta-10Si alloy. The Cr-8Ta-6Si alloy was developed with a good combination of strength and toughness, and the yield strength and fracture toughness of this alloy reached up to 960 +/- 20 MPa and 15 +/- 0.3 MPa m(1/2), respectively. The good combination of strength and toughness in the Cr-8Ta-6Si alloy resulted from the synergistic effects of solid solution strengthening, alloying toughening, interface strengthening and second phase toughening.

引用

页数：6

共 50 条

[21] A novel precipitation mechanism of Laves phase in Fe-30Cr-2Mo super ferritic stainless steel: In-situ phase transformation
Zhu, Yangyang
Ning, Likui
Liu, Enze
Zhou, Yangtao
Tan, Zheng
Tong, Jian
Li, Haiying
Zheng, Zhi
MATERIALS LETTERS, 2023, 338
[22] A study on the influence of Mo, Al and Si additions on the microstructure of annealed dual phase Cr-Ta alloys
Bhowmik, Ayan
Stone, Howard J.
JOURNAL OF MATERIALS SCIENCE, 2013, 48 (08) : 3283 - 3293
[23] Effects of fibrous Cr phase on the adiabatic shearing anisotropic behavior of the Cu-15Cr in-situ composite
Yang, Shuangjun
Yang, Yang
Chen, Zhongping
Nie, Jinzhe
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 916
[24] Effects of Si on Phase Stability and Precipitation Behavior of C14 Laves Phase (Fe,Cr)2(Nb,Mo) in High Cr αFe-base Alloys
Kimura, Yoshisato
Kato, Ko
Chai, Yaw Wang
MRS ADVANCES, 2019, 4 (25-26) : 1477 - 1483
[25] Effects of Si on Phase Stability and Precipitation Behavior of C14 Laves Phase (Fe,Cr)2(Nb,Mo) in High Cr αFe-base Alloys
Yoshisato Kimura
Ko Kato
Yaw Wang Chai
MRS Advances, 2019, 4 : 1477 - 1483
[26] Studies on synthesis and microstructure evolution of multiphase in-situ composites based on Mo-Cr-Si system
Bhaskar Paul
A. K. Suri
Transactions of the Indian Institute of Metals, 2011, 64
[27] Studies on synthesis and microstructure evolution of multiphase in-situ composites based on Mo-Cr-Si system
Paul, Bhaskar
Suri, A. K.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2011, 64 (1-2) : 105 - 110
[28] Effect of Si on the stability of NbCr2 Laves phase in Cr-Mo-Nb system
Peng, Li
Takizawa, Satoshi
Ikeda, Ken-ichi
Horiuchi, Toshiaki
Miura, Seiji
INTERMETALLICS, 2019, 110
[29] In Situ Synthesis of (Mo,Cr)Si2 Composites by Spark Plasma Sintering
Wang, Yue-Yao
Zhang, Guo-Hua
MATERIALS, 2024, 17 (16)
[30] Synergistic effects of Cd, Si and Cr additions on precipitation strengthening and thermal stability of dispersoids in AA3003 alloy
Qian, Feng
Jin, Shenbao
Wan, Di
Li, Wenzhe
Cheng, Xingwang
Sha, Gang
Li, Yanjun
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 832

← 1 2 3 4 5 →