Sintering Behaviour and Mechanical Properties of Al-Cu-Mg-Si-Sn Aluminum Alloy

被引：15
|
作者：
Padmavathi, C. [1 ]
Upadhyaya, Anish [1 ]
机构：
[1] Indian Inst Technol, Dept Mat Sci & Engn, Kanpur 208016, Uttar Pradesh, India
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2011年 / 64卷 / 4-5期
关键词：
Aluminum alloys; Powder metallurgy; Sintering; Microstructure; Mechanical properties; PARTICLE-SIZE; COPPER ALLOYS; POWDER; ATMOSPHERE; MAGNESIUM; ADDITIONS; COMPACTS;
D O I：
10.1007/s12666-011-0089-2
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The present study investigates the effect of compaction pressure and sintering temperature on densification response and mechanical properties of the Al-3.8Cu-1Mg-0.8Si-0.3Sn (2712) alloy. The compacts were pressed at 200 and 400 MPa and sintered at temperatures ranging from 570-630A degrees C in vacuum (10(-6) Torr). The objective of the present work is to obtain an optimum sintering conditions for achieving higher sintered densities and mechanical properties. The effect of sintering temperature is evaluated by measuring the sintered density, densification parameter, microstructure, phase changes and mechanical properties. While a higher sintering temperature results in densification enhancement, it also leads to microstructural coarsening. Significant improvement in mechanical properties is obtained through age-hardening of sintered alloy under various ageing conditions (T4, T6 and T8).
引用
收藏
页码：345 / 357
页数：13
相关论文
共 50 条
  • [41] Identification of precipitates in 6013 aluminum alloy (Al-Mg-Si-Cu)
    Barbosa, C
    Rebello, JMA
    Acselrad, O
    Dille, J
    Delplancke, JL
    ZEITSCHRIFT FUR METALLKUNDE, 2002, 93 (03): : 208 - 211
  • [42] Modeling homogenization behavior of Al-Si-Cu-Mg aluminum alloy
    Sadeghi, Ida
    Wells, Mary A.
    Esmaeili, Shahrzad
    MATERIALS & DESIGN, 2017, 128 : 241 - 249
  • [43] Effect of Combined Addition of Cu and Aluminum Oxide Nanoparticles on Mechanical Properties and Microstructure of Al-7Si-0.3Mg Alloy
    Choi, Hongseok
    Jones, Milton
    Konishi, Hiromi
    Li, Xiaochun
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (02): : 738 - 746
  • [44] Effect of Combined Addition of Cu and Aluminum Oxide Nanoparticles on Mechanical Properties and Microstructure of Al-7Si-0.3Mg Alloy
    Hongseok Choi
    Milton Jones
    Hiromi Konishi
    Xiaochun Li
    Metallurgical and Materials Transactions A, 2012, 43 : 738 - 746
  • [45] Aluminum Nitride in Al–Si–Mg Alloy
    Samira M. Arya
    W. D. Griffiths
    Metallurgical and Materials Transactions B, 2023, 54 : 1965 - 1984
  • [46] Study on the mechanism of improvement of mechanical properties of Al-Mg-Si aluminum alloys by Cu and Ce
    Peng, Mulan
    Li, Cheng
    Wei, He
    Lv, Qitao
    Li, Zulai
    Zhang, Fei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 3790 - 3808
  • [47] Effect of Heat Treatment on the Mechanical Properties and Corrosion Behaviour of Al-Si-Mg Alloy Systems
    Kaygisiz, Yusuf
    Kayan, Didem Balun
    PHYSICS OF METALS AND METALLOGRAPHY, 2022, 123 (14): : 1499 - 1508
  • [48] Effects of Sc and Zr on microstructure and mechanical properties of Al-Zn-Mg-Cu aluminum alloy
    Zhao, Zhi-Hao
    Wang, Gao-Song
    Zhang, Yi-Hang
    Cui, Jian-Zhong
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2011, 32 (11): : 1574 - 1577
  • [49] The effect of simultaneous deformation and annealing on the precipitation behaviour and mechanical properties of an Al-Mg-Si alloy
    Teichmann, Katharina
    Marioara, Calin D.
    Pedersen, Ketill O.
    Marthinsen, Knut
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 565 : 228 - 235
  • [50] Effect of predeformation on microstructures and mechanical properties of Al-Cu-Mn-Mg-Ag aluminum alloy
    Li, Hui-Zhong
    Li, Zhou
    Liang, Xiao-Peng
    Guo, Fei-Fei
    Sun, Feng-Wei
    Hangkong Cailiao Xuebao/Journal of Aeronautical Materials, 2009, 29 (02): : 29 - 33
12345