Fundamental Study on Interaction between Top Blown Jet and Liquid Bath

被引：51

作者：

Asahara, Norifumi ^{[1
]}

Naito, Ken-ichiro ^{[2
]}

Kitagawa, Itsuro ^{[3
]}

Matsuo, Michitaka ^{[2
]}

Kumakura, Masanori ^{[4
]}

Iwasaki, Masaki ^{[4
]}

机构：

[1] Nippon Steel Corp Ltd, Yawata R&D Lab, Tokyo, Japan

[2] Nippon Steel Corp Ltd, EPC, Tokyo, Japan

[3] Nippon Steel Corp Ltd, Tech Adm & Planning Div, Tokyo, Japan

[4] Nippon Steel Corp Ltd, Steelmaking Tech Div, Tokyo, Japan

来源：

STEEL RESEARCH INTERNATIONAL | 2011年 / 82卷 / 05期

关键词：

BOF; cavity formation; CFD; interference of jets; spitting; steelmaking; GAS;

D O I：

10.1002/srin.201100041

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

It is important to understand the physical interaction between top-blown oxygen jets and liquid steel in basic oxygen steelmaking furnaces (BOF). In the present study, cold model experiments and CFD simulations were carried out with single- and multi-hole nozzles and the velocity profiles of jets were successfully simulated. Water model experiments were also performed to study the cavity formation and the spitting phenomena by the impinging jets. The cavity shapes and the spitting behavior were correlated to the top-blowing conditions by considering the characteristics of multi-hole nozzle jets.

引用

页码：587 / 594

页数：8

共 50 条

[31] STIRRING EFFECT IN BATH-SMELTING FURNACE WITH COMBINED BLOWING OF TOP AND SIDE BLOWN OXYGEN AND BOTTOM BLOWN NITROGEN
HIRATA, T
ISHIKAWA, M
ANEZAKI, S
ISIJ INTERNATIONAL, 1992, 32 (02) : 182 - 189
[32] INTERACTION BETWEEN A LIQUID JET AND A CYLINDRICAL SURFACE.
Dorokhov, A.R.
Bochavov, V.N.
Izvestia Sibirskogo otdelenia Akademii nauk SSSR. Seria tehniceskih nauk, 1987, (15): : 8 - 11
[33] Interaction of a gas jet with the bath for an external nozzle
Okhotskii, VB
RUSSIAN METALLURGY, 1997, (04): : 15 - 21
[34] Submerged gas jet into a liquid bath: A review
Gulawani, S. S.
Deshpande, S. S.
Joshi, J. B.
Shah, M. S.
Prasad, C. S. R.
Shukla, D. S.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2007, 46 (10) : 3188 - 3218
[35] Physical modeling of stirring and mixing in bath of top-bottom-side blown converter
Zhong, Liang-Cai
Zhu, Ying-Xiong
Lai, Zhao-Yi
Chen, Bo-Yu
Dongbei Daxue Xuebao/Journal of Northeastern University, 2010, 31 (06): : 843 - 847
[36] Control of reverse emulsification and mixing time in a bottom blown bath covered with top slag
Yamashita, S
Iguchi, M
ISIJ INTERNATIONAL, 2003, 43 (09) : 1326 - 1332
[37] Influence of bottom tuyere configuration on bath stirring in a top and bottom combined blown converter
Lai, Zhaoyi
Xie, Zhi
Zhoing, Liangcai
ISIJ INTERNATIONAL, 2008, 48 (06) : 793 - 798
[38] INFLUENCE OF BATH AGITATION INTENSITY ON METALLURGICAL CHARACTERISTICS IN TOP AND BOTTOM BLOWN CONVERTER.
Kai, Tsuyoshi
Okohira, Kazuo
Hirai, Masazumi
Murakami, Shozo
Sato, Nobuo
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1982, 68 (14): : 1946 - 1954
[39] Interaction between a gaseous vertical jet and a liquid surface - a theorical and experimental study.
Salinas, L
Fuentes, R
SMELTING, TECHNOLOGY DEVELOPMENT, PROCESS MODELING AND FUNDAMENTALS, 1999, : 195 - 206
[40] Model study of bubble and liquid-flow characteristics in a bottom blown bath under reduced pressure
Iguchi, M
Ueda, H
Chihara, T
Morita, ZI
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 1996, 27 (05): : 765 - 772

← 1 2 3 4 5 →