Design and Prototyping of Micro Centrifugal Compressor

被引：1

作者：

Mizuki, Shimpei ^{[1
]}

Minorikawa, Gaku ^{[1
]}

Hirano, Toshiyuki ^{[1
]}

Asaga, Yuichiro ^{[1
]}

Yamaguchi, Naoki ^{[1
]}

Ohta, Yutaka ^{[2
]}

Outa, Eisuke ^{[2
]}

机构：

[1] Hosei Univ, Dept Mech Engn, Koganei, Tokyo 1848584, Japan

[2] Waseda Univ, Dept Mech Engn, Shinjuku Ku, Tokyo 1698555, Japan

来源：

JOURNAL OF THERMAL SCIENCE | 2003年 / 12卷 / 01期

关键词：

centrifugal compressor; performance characteristics; 2-dimensional impeller;

D O I：

10.1007/s11630-003-0006-z

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

In order to establish the design methodology of ultra micro centrifugal compressor, which is the most important component of ultra micro gas turbine unit, a 10 times of the final target size model was designed, prototyped and tested. The problems to be solved for downsizing were examined and 2-dimensional impeller was chosen as the first model due to its productivity. The conventional 1D prediction method, CFD and the inverse design were attempted. The prototyped compressor was driven by using a turbocharger and the performance characteristics were measured.

引用

页码：33 / 37

页数：5

共 50 条

[41] CENTRIFUGAL COMPRESSOR STAGE DESIGN PRINCIPLES CHECKING
Galerkin, Y.
Drozdov, A.
PROCEEDINGS OF THE ASME GAS TURBINE INDIA CONFERENCE, 2015, 2016,
[42] SOME CENTRIFUGAL-COMPRESSOR DESIGN ASPECTS
POLAK, P
AIRCRAFT ENGINEERING, 1976, 48 (02): : 21 - 22
[43] STUDY ON A SUBSONIC MICRO-CENTRIFUGAL COMPRESSOR STALL MECHANISM
Hong, Shuli
Huang, Guoping
Lu, Weiyu
PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2017, VOL 2C, 2017,
[44] Loss development analysis of a micro-scale centrifugal compressor
Tiainen, Jonna
Jaatinen-Varri, Ahti
Gronman, Aki
Fischer, Tore
Backman, Jari
ENERGY CONVERSION AND MANAGEMENT, 2018, 166 : 297 - 307
[45] Improved model for the design and analysis of centrifugal compressor volutes
Van den Braembussche, RA
Ayder, E
Hagelstein, D
Rautenberg, M
Keiper, R
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 1999, 121 (03): : 619 - 625
[46] CENTRIFUGAL COMPRESSOR DESIGN IMPACTS: LEAN AND MERIDIONAL SHAPE
Xu, Cheng
Amano, R. S.
PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2013, VOL 5B, 2013,
[47] AERODYNAMIC DESIGN IMPROVEMENT OF CENTRIFUGAL COMPRESSOR FOR TURBOCHARGER APPLICATION
Purushothaman, Kirubakaran
Varghese, David
Chandramohan, Kishore Kumar
Pandurangi, Vidyadheesh
Pratap, Ajay
Prasad, Kishore D.
PROCEEDINGS OF ASME 2023 GAS TURBINE INDIA CONFERENCE, GTINDIA2023, 2023,
[48] Airborne centrifugal refrigerating compressor design and characteristic analysis
Gao, Feng
Zhang, Xingjuan
Yuan, Xiugan
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2013, 39 (02): : 164 - 167
[49] Vaneless Diffuser of the Centrifugal Compressor Stage Design Method
Galerkin, Y. B.
Rekstin, A. F.
Solovyeva, O. A.
OIL AND GAS ENGINEERING (OGE-2019), 2019, 2141
[50] Improved model for the design and analysis of centrifugal compressor volutes
Van Den Braembussche, R.A.
Ayder, E.
Hagelstein, D.
Rautenberg, M.
Keiper, R.
Journal of Turbomachinery, 1999, 121 (03): : 619 - 625

← 1 2 3 4 5 →