Additive manufacturing of NdFeB magnets by synchronized three-beam laser powder bed fusion

被引：11
|
作者：
Yu, Kai-Sheng [1 ,2 ]
Cheng, Chung-Wei [1 ,2 ]
Lee, An-Chen [1 ,2 ]
Jian, Wei-You Jhang [1 ,2 ]
Chang, Wen-Cheng [3 ]
Chang, Tsung-Wei [4 ]
Tsai, Mi-Ching [4 ]
机构：
[1] Natl Yang Ming Chiao Tung Univ, Dept Mech Engn, 1001,Ta Hsueh Rd, Hsinchu 300, Taiwan
[2] Natl Chiao Tung Univ, Dept Mech Engn, 1001,Ta Hsueh Rd, Hsinchu 300, Taiwan
[3] Natl Chung Cheng Univ, Dept Phys, Chiayi, Taiwan
[4] Natl Cheng Kung Univ, Dept Mech Engn, Tainan, Taiwan
来源：
OPTICS AND LASER TECHNOLOGY | 2022年 / 146卷
关键词：
Laser powder bed fusion; NdFeB; Three-beam; Two-zone scanning;
D O I：
10.1016/j.optlastec.2021.107604
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
Neodymium iron boron (NdFeB) magnet that is manufactured using laser powder bed fusion (LPBF) machines has attracted attention since the complex magnetic parts can be directly manufactured. This study used LPBF systems with single and three-beam lasers to fabricate NdFeB components, and the effects of different process parameters (pulsed or continuous wave laser, powder layer thickness, laser power, and scanning velocity) on the magnetic characteristics were investigated. The results from the synchronized three-beam method using the two zone scanning strategy improved the maximum magnetic energy product by 33.42 kJ/m(3), and the processing time was decreased by 38% compared to the single-beam method.
引用
收藏
页数：8
相关论文
共 50 条
  • [31] Spattering mechanism of laser powder bed fusion additive manufacturing on heterogeneous surfaces
    Toshi-Taka Ikeshoji
    Makiko Yonehara
    Chika Kato
    Yuma Yanaga
    Koki Takeshita
    Hideki Kyogoku
    Scientific Reports, 12
  • [32] Laser Powder Bed Fusion Additive Manufacturing of Recycled Zircaloy-4
    Soung Yeoul Ahn
    Sang Guk Jeong
    Eun Seong Kim
    Suk Hoon Kang
    Jungho Choe
    Joo Young Ryu
    Dae Woon Choi
    Jin Seok Lee
    Jung-Wook Cho
    Takayoshi Nakano
    Hyoung Seop Kim
    Metals and Materials International, 2023, 29 : 2760 - 2766
  • [33] Alloy design for laser powder bed fusion additive manufacturing: a critical review
    Zhuangzhuang Liu
    Qihang Zhou
    Xiaokang Liang
    Xiebin Wang
    Guichuan Li
    Kim Vanmeensel
    Jianxin Xie
    International Journal of Extreme Manufacturing, 2024, (02) : 33 - 68
  • [34] A mechanistic explanation of shrinkage porosity in laser powder bed fusion additive manufacturing
    Templeton, William Frieden
    Hinnebusch, Shawn
    Strayer, Seth T.
    To, Albert C.
    Pistorius, P. Chris
    Narra, Sneha Prabha
    ACTA MATERIALIA, 2024, 266
  • [35] Composition regulation of composite materials in laser powder bed fusion additive manufacturing
    Yao, Dengzhi
    Wang, Ju
    Cai, Yao
    Zhao, Tingting
    An, Xizhong
    Zhang, Hao
    Fu, Haitao
    Yang, Xiaohong
    Zou, Qingchuan
    Wang, Lin
    POWDER TECHNOLOGY, 2022, 408
  • [36] Research Progress on Laser Powder Bed Fusion Additive Manufacturing of Zinc Alloys
    Meng, Fuxiang
    Du, Yulei
    MATERIALS, 2024, 17 (17)
  • [37] Dynamics of pore formation during laser powder bed fusion additive manufacturing
    Aiden A. Martin
    Nicholas P. Calta
    Saad A. Khairallah
    Jenny Wang
    Phillip J. Depond
    Anthony Y. Fong
    Vivek Thampy
    Gabe M. Guss
    Andrew M. Kiss
    Kevin H. Stone
    Christopher J. Tassone
    Johanna Nelson Weker
    Michael F. Toney
    Tony van Buuren
    Manyalibo J. Matthews
    Nature Communications, 10
  • [38] ON CHARACTERIZING UNCERTAINTY SOURCES IN LASER POWDER BED FUSION ADDITIVE MANUFACTURING MODELS
    Moges, Tesfaye
    Witherell, Paul
    Ameta, Gaurav
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 2A, 2019,
  • [39] Spattering mechanism of laser powder bed fusion additive manufacturing on heterogeneous surfaces
    Ikeshoji, Toshi-Taka
    Yonehara, Makiko
    Kato, Chika
    Yanaga, Yuma
    Takeshita, Koki
    Kyogoku, Hideki
    SCIENTIFIC REPORTS, 2022, 12 (01)
  • [40] Dynamics of pore formation during laser powder bed fusion additive manufacturing
    Martin, Aiden A.
    Calta, Nicholas P.
    Khairallah, Saad A.
    Wang, Jenny
    Depond, Phillip J.
    Fong, Anthony Y.
    Thampy, Vivek
    Guss, Gabe M.
    Kiss, Andrew M.
    Stone, Kevin H.
    Tassone, Christopher J.
    Weker, Johanna Nelson
    Toney, Michael F.
    van Buuren, Tony
    Matthews, Manyalibo J.
    NATURE COMMUNICATIONS, 2019, 10 (1)
12345