Welding characteristics of Ag-based contact material under automobile lamp load

被引：10

作者：

Liu, XJ ^{[1
]}

Xiao, F ^{[1
]}

Fei, HJ ^{[1
]}

机构：

[1] Fuzhou Univ, Dept Elect Engn, Fujian 350002, Peoples R China

来源：

PROCEEDINGS OF THE FORTY-NINTH IEEE HOLM CONFERENCE ON ELECTRICAL CONTACTS | 2003年

关键词：

contact material; welding; automobile lamp load; ductile fracture;

D O I：

10.1109/HOLM.2003.1246490

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The welding characteristics of different contact pairs, which are made up of AgNi10, AgNi0.15 or AgSnO2, under automobile lamp load are investigated. The appearance of contact surfaces and composition distributing over the welding area are studied by means of scanning electron microscope and electron probe. The results have shown that the welding area consists of melting area and welding points. The welding points distribute over the melting area. The rupture mode of welding points is ductile fracture and the fractured surfaces are characterized by a heavily dimpled appearance. The composition of welding points is almost the same as that of anode material for the asymmetrical pairs. The welding performance is influenced significantly by anode material.

引用

页码：145 / 149

页数：5

共 50 条

[31] Thermal Stability for Reflectance and Specific Contact Resistance of Ni/Ag-Based Contacts on p-Type GaN
Lin, Ray-Ming
Chou, Yi-Lun
Tseng, Wan-Ching
Tsai, Chia-Lung
Li, Jen-Chih
Wu, Meng-Chyi
ELECTROCHEMICAL AND SOLID STATE LETTERS, 2009, 12 (09) : H315 - H318
[32] Polypropylene Modified with Ag-Based Semiconductors as a Potential Material against SARS-CoV-2 and Other Pathogens
Assis, Marcelo
Ribeiro, Lara K.
Goncalves, Mariana O.
Staffa, Lucas H.
Paiva, Robert S.
Lima, Lais R.
Coelho, Dyovani
Almeida, Lauana F.
Moraes, Leonardo N.
Rosa, Ieda L. V.
Mascaro, Lucia H.
Grotto, Rejane M. T.
Sousa, Cristina P.
Andres, Juan
Longo, Elson
Cruz, Sandra A.
ACS APPLIED POLYMER MATERIALS, 2022, 4 (10) : 7102 - 7114
[33] Soft phonon modes lead to suppressed thermal conductivity in Ag-based chalcopyrites under high pressure
Yuan, Kunpeng
Zhang, Xiaoliang
Gao, Yufei
Tang, Dawei
PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 2023, 25 (36) : 24883 - 24893
[34] Bolt loosening characteristics based on change of slip-adhesion contact state under shear load
Wang K.
Yan M.
Su D.
Sun Z.
Hangkong Dongli Xuebao/Journal of Aerospace Power, 2023, 38 (02): : 453 - 461
[35] Multimodal Vibration Characteristics of Long-span Floor around Ocean under Automobile Load
Li, Liang
Li, Guanghui
Hong, Cheng
JOURNAL OF COASTAL RESEARCH, 2019, : 113 - 118
[36] High-purity Ti2AlC Powder: Preparation and Application in Ag-based Electrical Contact Materials
Ding Jianxiang
Huang Peiyan
Zha Yuhui
Wang Dandan
Zhang Peigen
Tian Wubian
Sun Zhengming
JOURNAL OF INORGANIC MATERIALS, 2020, 35 (06) : 729 - 734
[37] Improvement of Percussion Welding Characteristics of CuCr25 Contact Material by Decreasing Tensile Strength
Yu, Li
Geng, Yingsan
Li, Qian
Wang, Jianhua
Liu, Zhiyuan
Li, Dongwei
Wang, Wenbin
Wang, Xiaojun
PROCEEDINGS OF THE FIFTY-FIFTH IEEE HOLM CONFERENCE ON ELECTRICAL CONTACTS, 2009, : 195 - +
[38] Lightweight Design of Automobile Drive Shaft Based on the Characteristics of Low Amplitude Load Strengthening
Zheng Songlin
Xu Honghui
Feng Jinzhi
Zheng Zuanxi
Wang Youtao
Lu Leilei
CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2011, 24 (06) : 1111 - 1115
[39] Lightweight Design of Automobile Drive Shaft Based on the Characteristics of Low Amplitude Load Strengthening
ZHENG Songlin1
revised November 17
accepted June 10
published electronically June 15
Chinese Journal of Mechanical Engineering, 2011, 24 (06) : 1111 - 1115
[40] Study on contact material for electro magnetic relays under middle level current load
Tatano, Satoshi
Saso, Hirofumi
Proceedings of the 2nd International Conference on Reliability of Electrical Products and Electrical Contacts, 2007, : 91 - 96

← 1 2 3 4 5 →