Welding characteristics of Ag-based contact material under automobile lamp load

被引：10
|
作者：
Liu, XJ [1 ]
Xiao, F [1 ]
Fei, HJ [1 ]
机构：
[1] Fuzhou Univ, Dept Elect Engn, Fujian 350002, Peoples R China
来源：
PROCEEDINGS OF THE FORTY-NINTH IEEE HOLM CONFERENCE ON ELECTRICAL CONTACTS | 2003年
关键词：
contact material; welding; automobile lamp load; ductile fracture;
D O I：
10.1109/HOLM.2003.1246490
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The welding characteristics of different contact pairs, which are made up of AgNi10, AgNi0.15 or AgSnO2, under automobile lamp load are investigated. The appearance of contact surfaces and composition distributing over the welding area are studied by means of scanning electron microscope and electron probe. The results have shown that the welding area consists of melting area and welding points. The welding points distribute over the melting area. The rupture mode of welding points is ductile fracture and the fractured surfaces are characterized by a heavily dimpled appearance. The composition of welding points is almost the same as that of anode material for the asymmetrical pairs. The welding performance is influenced significantly by anode material.
引用
收藏
页码：145 / 149
页数：5
相关论文
共 50 条
  • [1] Effect of strengthening phase on material transfer behavior of Ag-based contact materials under different voltages
    Li, Hangyu
    Wang, Xianhui
    Liu, Yanfeng
    Guo, Xiuhua
    VACUUM, 2017, 135 : 55 - 65
  • [2] Laser welding-brazing of alumina to 304 stainless steel with an Ag-based filler material
    Zhang, Yan
    Chen, YanKun
    Zhou, JianPing
    Sun, DaQian
    Li, HongMei
    METALLURGICAL RESEARCH & TECHNOLOGY, 2020, 118 (01)
  • [3] Synthesis and antimicrobial behaviour of NiO/Ag-based material
    Saklani, Taru
    Joshi, Naveen Chandra
    Jakhmola, Vikash
    JOURNAL OF THE INDIAN CHEMICAL SOCIETY, 2024, 101 (08)
  • [4] Material transfer in dynamic welding of Ag and Ag/SnO2 contact material
    Chi, L
    Streicher, E
    ELECTRICAL CONTACTS-2002: PROCEEDINGS OF THE FORTY-EIGHTH IEEE HOLM CONFERENCE ON ELECTRICAL CONTACTS, 2002, : 21 - 28
  • [5] Current Research Status and Outlook of Ag-based Contact Materials
    Ding J.
    Sun Z.
    Zhang P.
    Tian W.
    Zhang Y.
    Sun, Zhengming (zmsun@seu.edu.cn), 2018, Cailiao Daobaoshe/ Materials Review (32): : 58 - 66
  • [6] Biofabrication, Characterisation and Antimicrobial Activity of CuO/Ag-based Material
    Saklani, Taru
    Joshi, Naveen Chandra
    Jakhmola, Vikash
    JOURNAL OF PURE AND APPLIED MICROBIOLOGY, 2024, 18 (02): : 1013 - 1024
  • [7] CONTACT RESISTANCE CHARACTERISTICS OF AG MATERIAL IN BREAKING LOW-LOAD DC ARCS
    CHEN, ZK
    MIZUKOSHI, H
    SAWA, K
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY PART A, 1994, 17 (01): : 113 - 120
  • [8] Investigation of High Frequency Characteristics of Ag-based Wirebonds
    Hwang, Lih-Tyng
    Feng, Chang-Yi
    Chang, Hui-Chu
    2015 IEEE 65TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2015, : 2102 - 2107
  • [9] Investigation of Welding Characteristics and NSDD Probabilities of Different Contact Materials Under Capacitive Load Conditions
    Kumichev, Gleb A.
    Poluyanova, Irina N.
    PROCEEDINGS OF THE 27TH INTERNATIONAL SYMPOSIUM ON DISCHARGES AND ELECTRICAL INSULATION IN VACUUM (ISDEIV), VOL 1, 2016, : 189 - 192
  • [10] Study on Switching Characteristics and Associated Degradation Mechanism of Contact Material Under Capacitive Load
    Ren, Wanbin
    Zhang, Xu
    Wang, Tengyu
    Wei, Jianmin
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2018, 8 (11): : 2030 - 2038
12345