Physical and Mechanical Properties of Thermoplastic Composites Filled with Wood Flour of Underutilized Chaste Tree

被引:0
|
作者
Ayrilmis, Nadir [1 ]
Yildiz, Esra [1 ]
机构
[1] Istanbul Univ Cerrahpasa, Fac Forestry, Dept Wood Mech & Technol, TR-34473 Istanbul, Turkey
关键词
Vitex agnus-castus; polypropylene; thermoplastic; composite; lignocellulosic filler; FIBER;
D O I
10.5552/drvind.2022.2128
中图分类号
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号
0805 ; 080502 ; 0822 ;
摘要
The potential use of a lignocellulosic filler, Vitex agnus-castus plant (Chaste tree), which is a decidu-ous invasive shrub, in thermoplastic composites was investigated. The stems of chaste trees with a diameter of 5-10 cm from Mugla city, Western Turkey, were used for the study. The different amounts (0 to 50 wt%, by 10 % increments) of the wood flour passing through the screen openings of 0.237 mm were added to the polypropylene matrix. Pre-mixed raw materials were put into the volumetric feeder of the twin-screw extruder. The extruder barrel temperature was gradually increased from 170 degrees C (feeding zone) to the die zone (190 degrees C) at a constant screw speed (40 rpm). Then, the dried granules were hot-pressed into the 4 mm thick WPC panels at 2 MPa and 190 degrees C for 5 min. 3 wt% of maleic anhydride grafted polypropylene (MAPP) was added as compatibilizer into the formulation. The WPCs showed an increase in the thickness swelling (0.58 to 5.68 %) as the amount of the filler increased from 10 to 50 wt% in the polypropylene. The bending strength of the polypropylene composites increased from 33.9 to 44.8 MPa as the amount of the chaste wood flour was increased to 30 wt%, but further increase caused the decrease in the tensile strength (25.7 MPa). As for the bending modulus, it increased from 815 to 3250 MPa when the wood content reached 50 wt%. The tensile modulus increased from 1690 to 2253 MPa when the wood content arised from 10 to 50 wt%. The tensile strength, tensile modulus, flexural strength and flexural modulus of the unfilled polypropylene were found to be 19.6 MPa, 1505 MPa, 30.2 MPa and 664 MPa, respectively. According to the test results, it was concluded that the 30-40 wt% of Vitex agnus-castus wood could be efficiently used in the polypropylene composites for the semi-building applications such as decking or siding. The evaluation of underused invasive chaste wood in the production of tWPC production may result in an effective way to utilize this resource.
引用
收藏
页码:495 / 501
页数:7
相关论文
共 50 条
  • [41] Hybrid recycled glass fiber/wood flour thermoplastic composites: Manufacturing and mechanical characterization
    Valente, Marco
    Sarasini, Fabrizio
    Marra, Francesco
    Tirillo, Jacopo
    Pulci, Giovanni
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (06) : 649 - 657
  • [42] Mechanical Properties of Oil Palm Frond Wood Filled Thermoplastic Polyurethane
    Lubis, A. M. H. S.
    Jeefferie, A. R.
    Damanhuri, A. A. M.
    Rahmah, A. U.
    Razak, M. N. A. A.
    INTERNATIONAL JOURNAL OF NANOELECTRONICS AND MATERIALS, 2020, 13 : 255 - 266
  • [43] Curing and physical properties of natural rubber/wood flour composites
    Ichazo, Miren Nekane
    Hernandez, Marianela
    Albano, Carmen
    Gonzalez, Jeanette
    MACROMOLECULAR SYMPOSIA, 2006, 239 : 192 - 200
  • [44] Mechanical and rheological properties of polypropylene copolymer wood flour composites
    Phadke, YB
    Shertukde, VV
    JOURNAL OF POLYMER MATERIALS, 2005, 22 (03): : 301 - 311
  • [45] MORPHOLOGY AND MECHANICAL PROPERTIES OF POLYPROPYLENE-WOOD FLOUR COMPOSITES
    Dobreva, D.
    Nenkova, S.
    Vasileva, St.
    BIORESOURCES, 2006, 1 (02): : 209 - 219
  • [46] Thermal and Mechanical Properties of Polypropylene/Wood-Flour Composites
    Ndiaye, Diene
    Matuana, Laurent M.
    Morlat-Therias, Sandrine
    Vidal, Loic
    Tidjani, Adams
    Gardette, Jean-Luc
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 119 (06) : 3321 - 3328
  • [47] MECHANICAL-PROPERTIES OF ISOTACTIC POLYPROPYLENE WOOD FLOUR COMPOSITES
    MAITI, SN
    SUBBARAO, R
    INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS, 1991, 15 (01) : 1 - 16
  • [48] Effects of the Size of Wood Flour on Mechanical Properties of Wood-Plastic Composites
    Huang, Haibing
    Du, Huhu
    Wang, Weihong
    Wang, Haigang
    BIOTECHNOLOGY, CHEMICAL AND MATERIALS ENGINEERING, PTS 1-3, 2012, 393-395 : 76 - 79
  • [49] Structural, electrical, and physical-mechanical properties of composites obtained based on filled polyolefins and thermoplastic elastomers
    Allahverdiyeva, Khayala Vagif Gizi
    Kakhramanov, Najaf Tofig Oglu
    Gurbanova, Rena Vagif Gizi
    RSC ADVANCES, 2025, 15 (09) : 6541 - 6563
  • [50] The influence of wood flour particle size and content on the rheological, physical, mechanical and morphological properties of EVA/wood cellular composites
    Zimmermann, Matheus V. G.
    Turella, Tais C.
    Santana, Ruth M. C.
    Zattera, Ademir J.
    MATERIALS & DESIGN, 2014, 57 : 660 - 666