Find the Optimum Shape Design of Externally Pressurized Torispherical Dome Ends Based on Buckling Pressure by Using Imperialist Competitive Algorithm and Genetic Algorithm

被引：1
|
作者：
Abdi, Behzad [1 ]
Mozafari, Hamid [1 ]
Ayob, Amran [1 ]
机构：
[1] Tech Univ Malaysia, Dept Mech Engn, Skudai 81310, Johor, Malaysia
来源：
MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7 | 2012年 / 110-116卷
关键词：
Imperialist Competitive Algorithm; Genetic Algorithm; Four-Centered Ellipse Method; Torispherical; Buckling Pressure; External Pressure;
D O I：
10.4028/www.scientific.net/AMM.110-116.956
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
In this paper, we used the Imperialist Competitive Algorithm (ICA) and Genetic Algorithm (GA) to find the minimum weight design of torispherical dome ends under external pressure load. According to fabrication and strength of material requirements, a group of compromised counters are selected and studied. Based on ASME Section VIII and BS5500 pressure vessel codes, a reasonable buckling pressure limit is proposed. Four-centered ellipse method is quite effective in designing and constructing the dome structure and it is used here to construct the torispherical dome ends. Two different size torispherical dome end models are selected and studied. Imperialist competitive algorithm is found to be very efficient and easy to use for the applications.
引用
收藏
页码：956 / 964
页数：9
相关论文
共 33 条
  • [21] Optimum Design of Substation Grounding Grid Based on Grid Balancing Parameters using Genetic Algorithm
    Taher, Ahmed
    Said, Abdelrahman
    Eliyan, Tamer
    Hafez, Abdelsalam
    2018 TWENTIETH INTERNATIONAL MIDDLE EAST POWER SYSTEMS CONFERENCE (MEPCON), 2018, : 352 - 360
  • [22] Multi-objective optimization of filament wound composite pressure vessels based on weight and matrix cracking/burst pressure using imperialist competitive algorithm
    Abdi, Behzad
    Bin Ismail, Yob Saed
    Ayob, Amran
    Abdullah, M. R.
    bin Yahya, Mohd Yazid
    APPLIED MECHANICS AND INDUSTRIAL TECHNOLOGIES, 2012, 234 : 34 - 38
  • [23] Satisfaction optimum design of ring-shape TLD control for high-rise structure using genetic algorithm
    Chen X.
    Li A.-Q.
    Xu Q.-Y.
    Zhang Z.-Q.
    Chen, Xin (civil.chenxin@gmail.com), 1600, Tsinghua University (33): : 77 - 84
  • [24] PFC based PID design using genetic algorithm for chamber pressure in a coke furnace
    Tao, Jili
    Yu, Zaihe
    Zhu, Yong
    CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS, 2014, 137 : 155 - 161
  • [25] Optimum geometry and spacing design of roof trusses based on BS5950 using genetic algorithm
    Weldali, SH
    Saka, MP
    OPTIMIZATION AND CONTROL IN CIVIL AND STRUCTURAL ENGINEERING, 1999, : 119 - 130
  • [26] Genetic algorithm-based optimum vehicle suspension design using minimum dynamic pavement load as a design criterion
    Sun, Lu
    Cai, Ximing
    Yang, Jun
    JOURNAL OF SOUND AND VIBRATION, 2007, 301 (1-2) : 18 - 27
  • [27] ANFIS-Based Optimum Design of Real Power Transmission Towers with Size, Shape and Panel Design Variables using BBO Algorithm
    Hosseini, Neda
    Ghasemi, Mohammad Reza
    Dizangian, Babak
    IEEE TRANSACTIONS ON POWER DELIVERY, 2022, 37 (01) : 29 - 39
  • [28] Optimum design of ring-shape TLD control for high-rise structure using multi-objective genetic algorithm
    Chen, Xin
    Li, Aiqun
    Zhang, Zhiqiang
    Xu, Qingyang
    Tumu Gongcheng Xuebao/China Civil Engineering Journal, 2014, 47 (12): : 73 - 81
  • [29] Configurations and pressure levels optimization of heat recovery steam generator using the genetic algorithm method based on the constructal design
    Mehrgoo, Morteza
    Amidpour, Majid
    APPLIED THERMAL ENGINEERING, 2017, 122 : 601 - 617
  • [30] Optimal design of high-pressure fuel pipe based on vibration response and strength using multi-objective genetic algorithm
    AbiarKashani, Mehdi
    Alizadeh Vaghasloo, Younes
    AghaMirsalim, Mostafa
    STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, 2021, 64 (02) : 935 - 956
1234