Microstructural and Mechanical Properties Characterization of Graphene Oxide-Reinforced Ti-Matrix Composites

被引：4

作者：

Wan, Zhaomei ^{[1
]}

Li, Jiuxiao ^{[1
]}

Yang, Dongye ^{[1
]}

Hou, Shuluo ^{[1
]}

机构：

[1] Shanghai Univ Engn Sci, Sch Mat Engn, Shanghai 201620, Peoples R China

来源：

COATINGS | 2022年 / 12卷 / 02期

关键词：

Ti-matrix composites (TMCs); graphene oxide (GO); mechanical properties; reinforcement;

D O I：

10.3390/coatings12020120

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The 0.1-0.7 wt.% graphene oxide (GO)-reinforced Ti-matrix composites (TMCs) were prepared by the hot-pressed sintering method. The effects of GO content on the mechanical properties of TMCs were investigated. The microstructure of TMCs was analyzed. The results show that the microstructure of Ti and TMCs is equiaxed alpha. The average grain size of TMCs decreases with GO increasing. GO can react with Ti to form TiC at high temperatures. Meanwhile, GO is also presented in the matrix. The hardness of TMCs is higher than that of pure Ti. The maximum hardness is 320 HV, which is 43% higher than that of pure Ti. The yield strength of Ti-0.5 wt.% GO sintered at 1373 K is 1324 MPa, 77% more than pure Ti. The strengthening mechanism of TMCs is the fine-grained strengthening and the reinforcement that bear the stress from the matrix. The friction coefficient of Ti-0.3 wt.% GO sintered at 1373 K comes up to 0.50, which is reduced by 0.2 compared with pure Ti.

引用

页数：12

共 50 条

[31] Microstructural and mechanical characterization of in-situ TiC/Ti titanium matrix composites fabricated by graphene/Ti sintering reaction
Zhang, Xinjiang
Song, Feng
Wei, Zhiping
Yang, Wenchao
Dai, Zhongkui
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 705 : 153 - 159
[32] Study on modification mechanism of workability and mechanical properties for graphene oxide-reinforced cement composite
Suo, Yuxia
Guo, Rongxin
Xia, Haiting
Yang, Yang
Yan, Feng
Ma, Qianmin
NANOMATERIALS AND NANOTECHNOLOGY, 2020, 10
[33] Hyperbranched polyamide modified graphene oxide-reinforced polyurethane nanocomposites with enhanced mechanical properties
Liu, Yahao
Zheng, Jian
Zhang, Xiao
Du, Yongqiang
Yu, Guibo
Li, Ke
Jia, Yunfei
Zhang, Yu
RSC ADVANCES, 2021, 11 (24) : 14484 - 14494
[34] Selective laser melting of lanthanum oxide-reinforced tungsten composites: microstructure and mechanical properties
Shen-Yu Wei
Li-Na Ji
Wen-Jie Wu
Hong-Lin Ma
Tungsten, 2022, 4 : 67 - 78
[35] Friction and Wear Behavior of Graphene and Graphite Oxide-Reinforced Epoxy Composites
Venkataraman, Karthik Srinivas
Segall, Albert E.
Urita, Koki
Feeney, Cira
Sherant, Ron
Urita, Chiharu
Madden, Ben
Krohn, Matthew
Vallejos-Burgos, Fernando
TRIBOLOGY TRANSACTIONS, 2022, 65 (04) : 716 - 727
[36] Mechanical and microstructural properties of titanium matrix composites reinforced by TiN particles
Romero, F.
Amigo, V.
Salvador, M. D.
Martinez, E.
PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 : 825 - +
[37] Fabrication and mechanical characterization of graphene oxide-reinforced poly (acrylic acid)/gelatin composite hydrogels
Faghihi, Shahab
Gheysour, Mahsa
Karimi, Alireza
Salarian, Reza
JOURNAL OF APPLIED PHYSICS, 2014, 115 (08)
[38] Thermal and Mechanical Interfacial Behaviors of Graphene Oxide-Reinforced Epoxy Composites Cured by Thermal Latent Catalyst
Riaz, Shahina
Park, Soo-Jin
MATERIALS, 2019, 12 (08)
[39] Effect of matrix properties on thermal residual stress of fiber reinforced Ti-matrix composities
Lou J.
Yang Y.
Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2016, 30 (07): : 503 - 508
[40] DIRECT INK WRITING OF GRAPHENE OXIDE REINFORCED PDMS MATRIX COMPOSITES FOR IMPROVED MECHANICAL PROPERTIES
Liu, Chao
Jiang, Li
Ding, Junjun
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2018, VOL 2, 2019,

← 1 2 3 4 5 →