Microstructural Evolution of AISI D2 Tool Steel During Aging

被引：1

作者：

Farina, Paula F. S. ^{[1
]}

Farina, Alexandre B. ^{[1
,4
]}

Capo, Julio ^{[2
]}

Padovese, Linilson R. ^{[3
]}

Barbosa, Celso A. ^{[4
]}

Goldenstein, Helio ^{[1
]}

机构：

[1] Univ Sao Paulo, Escola Politecn, BR-05508 Sao Paulo, Brazil

[2] Univ Oriente, Fac Ciencias Naturales, Santiago De Cuba, Cuba

[3] Univ Sao Paulo, Escola Politecn, Mech Dept, Sao Paulo, Brazil

[4] Villares Met SA, Jardim Santa Carolina, Brazil

来源：

SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2 | 2011年 / 172-174卷

关键词：

tool steel; aging; Barkhausen Noise; WEAR-RESISTANCE;

D O I：

10.4028/www.scientific.net/SSP.172-174.511

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effects of low temperature isothermal treatments on a quenched AISI D2 tool steel was studied using Barkhausen Noise, X-ray diffraction, dilatometry and optical and electronic microscopy. The specimens were austenitized at 1040 degrees C and quenched in oil. The isothermal treatments involved immersion in hot oil baths at 80 degrees or 130 degrees C for 0.1, 0.6, 1, 3, 10 and 30 hours, except for the dilatometry, in which the specimens were submitted to a single thermal cycle for 30 hours. These thermal treatments are industrially known as "stress relief treatments", and are used to prevent cracks and catastrophic failures during cryogenic treatments. The comparison of global and local (microscopy) measurements allows the discussion of the phenomena involved in the aging process.

引用

页码：511 / +

页数：2

共 50 条

[31] Microstructural Quantification of Rapidly Solidified Undercooled D2 Tool Steel
J. Valloton
D. M. Herlach
H. Henein
D. Sediako
Metallurgical and Materials Transactions A, 2017, 48 : 4735 - 4743
[32] Analysis of Machinability During Hard Turning of Cold Work Tool Steel (Type: AISI D2)
Gaitonde, V. N.
Karnik, S. R.
Figueira, Luis
Davim, J. Paulo
MATERIALS AND MANUFACTURING PROCESSES, 2009, 24 (12) : 1373 - 1382
[33] Investigation of the impact of AISI D2 tool steel wear and lubrication type on the evolution of the friction coefficient during cold winding process
Boungomba, Hans
Moreau, Philippe
Sadat, Tarik
Lilensten, Lola
Dubar, Mirentxu
Dubar, Laurent
WEAR, 2024, 542
[34] Effect of Grinding Environments on Magnetic Response of AISI D2 Tool Steel
Ashwani Sharma
Abhimanyu Chaudhari
Akash Subhash Awale
Mohd Zaheer Khan Yusufzai
Meghanshu Vashista
Russian Journal of Nondestructive Testing, 2021, 57 : 212 - 221
[35] Electromagnetic nondestructive evaluation of tempering process in AISI D2 tool steel
Kahrobaee, Saeed
Kashefi, Mehrdad
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2015, 382 : 359 - 365
[36] Fatigue behaviour of laser shock peened AISI D2 tool steel
Azevedo, Lucas
Kashaev, Nikolai
Horstmann, Christian
Ventzke, Volker
Furtado, Carlos
Moreira, Pedro M. G. P.
Tavares, Paulo J.
INTERNATIONAL JOURNAL OF FATIGUE, 2022, 165
[37] Wear properties of friction stir processed AISI D2 tool steel
Yasavol, Noushin
Ramalho, Amilcar
TRIBOLOGY INTERNATIONAL, 2015, 91 : 177 - 183
[38] Effects of cryogenic treatment on residual stresses of AISI D2 tool steel
Demir, E.
Toktas, I.
KOVOVE MATERIALY-METALLIC MATERIALS, 2018, 56 (03): : 153 - 161
[39] Effect of Grinding Environments on Magnetic Response of AISI D2 Tool Steel
Sharma, Ashwani
Chaudhari, Abhimanyu
Awale, Akash Subhash
Yusufzai, Mohd Zaheer Khan
Vashista, Meghanshu
RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING, 2021, 57 (03) : 212 - 221
[40] The effect of cutting parameters on tool wear in end milling of AISI D2 tool steel
Luqman, N. H. J.
Shukor, S. Mohd
Hadzley, M.
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2017 (MERD), 2017, : 124 - 125

← 1 2 3 4 5 →