Analysis of nozzle clogging position in a continuous casting mold

被引：4
|
作者：
Li Jinbo [1 ,2 ]
Zhang Tao [1 ]
Gao Fubin [1 ]
Gong Yankun [1 ]
Zhou Dan [1 ]
机构：
[1] HBIS Grp, Hansteel Co Ltd, Handan 056000, Peoples R China
[2] Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China
来源：
INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING | 2022年 / 20卷 / 10期
关键词：
clogging; inclusion; level fluctuation; submerged entry nozzle; surface velocity; GRAPHITE IMMERSION NOZZLE; MECHANISM; MODEL;
D O I：
10.1515/ijcre-2021-0291
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
In this paper, the flow field of the submerged entry nozzle (SEN) in the continuous casting process is analyzed in detail by numerical simulation. It is found that the front and rear positions of the SEN outlets and the bottom of the nozzle are prone to the accumulation of inclusions. Compared with the actual SEN, the clogging positions with the simulated results are consistent. The composition of nozzle nodules at two different positions is analyzed by scanning electron microscope (SEM), and the inclusions are alumina. The changes in molten steel level characteristics in the mold without and after clogging are compared and analyzed. It is found that the velocity of molten steel near the surface with nozzle clogging reaches 0.483 m/s, the free level fluctuation value of molten steel is 8.9 mm, which is easy to cause steel defects.
引用
收藏
页码：1027 / 1033
页数：7
相关论文
共 50 条
  • [21] Analysis on clogging of submerged entry nozzle in continuous casting of high strength steel with rare earth
    Wei Liang
    Jing Li
    Bin Lu
    Jian-guo Zhi
    Shuai Zhang
    Yang Liu
    Journal of Iron and Steel Research International, 2022, 29 : 34 - 43
  • [22] The swirling effect in an immersion nozzle on the flow in a continuous casting mold
    Yokoya, S
    Takagi, S
    Iguchi, M
    Marukawa, K
    Hara, S
    COMPUTATIONAL MODELING OF MATERIALS, MINERALS AND METALS PROCESSING, 2001, : 471 - 480
  • [23] Physical Modeling of Asymmetrical Flow in Slab Continuous Casting Mold due to Submerged Entry Nozzle Clogging with the Effect of Electromagnetic Stirring
    Li, Bin
    Lu, Haibiao
    Shen, Zhe
    Sun, Xiaohui
    Zhong, Yunbo
    Ren, Zhongming
    Lei, Zuosheng
    ISIJ INTERNATIONAL, 2019, 59 (12) : 2264 - 2271
  • [24] Analysis of the Depth of Immersion of the Submerged Entry Nozzle on the Oscillations of the Meniscus in a Continuous Casting Mold
    Saldana-Salas, E.
    Torres-Alonso, E.
    Ramos-Banderas, J. A.
    Solorio-Diaz, G.
    Hernandez-Bocanegra, C. A.
    METALS, 2019, 9 (05)
  • [25] Simulation of nozzle clogging during the continuous casting of aluminum-killed steel
    Department of Metallurgical Engineering, University of Missouri-Rolla, Rolla, MO
    不详
    Iron Steel Technol., 2006, 2 (123-133):
  • [26] NUMERICAL SIMULATION OF FLUID FLOW AND NOZZLE CLOGGING DURING CONTINUOUS CASTING STEEL
    Wu, Suzhou
    Li, Zhizheng
    Xue, Zhengliang
    METALURGIA INTERNATIONAL, 2011, 16 (10): : 34 - 40
  • [27] Controlling the electric field characteristics to suppress the clogging and corrosion of the continuous casting nozzle
    Xin Yang
    Yuanyuan Zhang
    Wenlong Zhan
    Feixiong Mao
    Jingkun Yu
    Zhijun He
    Journal of the Australian Ceramic Society, 2021, 57 : 1255 - 1262
  • [28] Role of Solidification in Submerged Entry Nozzle Clogging During Continuous Casting of Steel
    Barati, Hadi
    Wu, Menghuai
    Kharicha, Abdellah
    Ludwig, Andreas
    STEEL RESEARCH INTERNATIONAL, 2020, 91 (12)
  • [29] Controlling the electric field characteristics to suppress the clogging and corrosion of the continuous casting nozzle
    Yang, Xin
    Zhang, Yuanyuan
    Zhan, Wenlong
    Mao, Feixiong
    Yu, Jingkun
    He, Zhijun
    JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2021, 57 (04) : 1255 - 1262
  • [30] Simulation of nozzle clogging during the continuous casting of aluminum-killed steel
    Trueba, L
    Peaslee, KD
    Smith, JD
    84TH STEELMAKING CONFERENCE PROCEEDINGS, 2001, 84 : 913 - 924
12345