ITER divertor heat transfer system and loss of vacuum accident sequence analyses overview

被引:2
|
作者
Cambi, G
Porfiri, MT
Jahn, H
Cepraga, DG
Bartels, HW
机构
[1] Univ Bologna, Dept Phys, I-40126 Bologna, Italy
[2] EURATOM Assoc, ENEA Fus, I-00044 Frascati, Italy
[3] Gesell Reaktorsicherheit GmbH, D-8046 Garching, Germany
[4] ENEA, INN, FIS, I-40129 Bologna, Italy
[5] ITER JCT, San Diego Co Ctr, San Diego, CA USA
关键词
D O I
10.1016/S0920-3796(98)00090-8
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
The paper presents the analyses performed by the European Union ITER Home Team for five ITER reference accident sequences: two loss of flow and two loss of coolant accidents on the divertor primary heat transfer system, and one loss of vacuum accident. Tritium and activated materials ground and stack environmental releases have been evaluated for each one of the accident sequences, up to 7 days from the accident start. The ATHENA and the INTRA codes are used for the accident transient thermal-hydraulic analysis and for the containment response to coolant leaks, respectively. The NAUA Mod 5M code has been used to assess the radioactive material transport, deposition and leakage inside and through the containment. (C) 1998 Elsevier Science S.A. All rights reserved.
引用
收藏
页码:95 / 101
页数:7
相关论文
共 50 条
  • [31] Analyses of entropy generation and heat entransy loss in heat transfer and heat-work conversion
    Cheng, XueTao
    Liang, XinGang
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 64 : 903 - 909
  • [32] Heat transfer and thermo-mechanical analyses of W/CuCrZr monoblock divertor in subcooled flow boiling
    Liu, P.
    Ding, W. L.
    Ji, J. D.
    Song, Y. T.
    Wang, P. T.
    Peng, X. B.
    Chen, Q. H.
    Mao, X.
    Qian, X. Y.
    Zhang, J. W.
    FUSION ENGINEERING AND DESIGN, 2019, 144 : 46 - 56
  • [33] MODELING AND SIMULATION OF THE ITER FIRST WALL/BLANKET PRIMARY HEAT TRANSFER SYSTEM
    Popov, Emilian
    Ying, Alice
    FUSION SCIENCE AND TECHNOLOGY, 2011, 60 (01) : 128 - 133
  • [34] Heat transfer to the building structures of ignalina NPP accident localization system
    Babilas, E
    Rimkevicius, S
    Urbonavicius, E
    Advances in Heat Transfer Engineering, Proceedings, 2003, : 597 - 604
  • [35] Heat transfer to the building structures of the Ignalina NPP accident localisation system
    Babilas, E.
    Rimkevicius, S.
    Urbonavicius, E.
    KERNTECHNIK, 2010, 75 (1-2) : 20 - 24
  • [37] Engineering Model of Beryllium Dust Layer Oxidation in an Accident with Coolant Outflow from the Cooling System into the ITER Vacuum Chamber
    A. D. Vasiliev
    K. S. Dolganov
    A. E. Kisselev
    L. V. Matweev
    V. N. Semenov
    Physics of Atomic Nuclei, 2023, 86 : 1545 - 1554
  • [38] The design and test of the electrical insulation break for the EAST Divertor primary heat transfer system
    Wei, Wei
    Cao, Jiyin
    Yang, Lei
    Lidong, Yao
    Zhang, Taotao
    Guo, Bin
    FUSION ENGINEERING AND DESIGN, 2023, 195
  • [39] Engineering Model of Beryllium Dust Layer Oxidation in an Accident with Coolant Outflow from the Cooling System into the ITER Vacuum Chamber
    Vasiliev, A. D.
    Dolganov, K. S.
    Kisselev, A. E.
    Matweev, L. V.
    Semenov, V. N.
    PHYSICS OF ATOMIC NUCLEI, 2023, 86 (07) : 1545 - 1554
  • [40] Heat Transfer at Mixed Convection in Horizontal Flat Channels of the Vacuum Vessel of the International Thermonuclear Experimental Reactor (ITER)
    B. F. Balunov
    A. S. Babykin
    T. S. Zhivitskaya
    V. A. Krylov
    V. N. Tanchuk
    S. A. Grigor'ev
    High Temperature, 2004, 42 : 278 - 285