Tangential strain-based criteria for mixed-mode I/II fracture toughness of cement concrete

被引:64
|
作者
Mirsayar, M. M. [1 ]
Razmi, A. [2 ]
Berto, F. [3 ]
机构
[1] Texas A&M Univ, Zachry Dept Civil Engn, College Stn, TX 77843 USA
[2] Islamic Azad Univ Ahar, Dept Civil Engn, Ahar, Iran
[3] NTNU, Dept Engn Design & Mat, Trondheim, Norway
关键词
cement concrete; fracture criteria; maximum tangential strain; semicircular bend (SCB) specimen; FIBER-REINFORCED CONCRETE; ANGLED CRACK PROBLEM; BRITTLE-FRACTURE; T-STRESS; CRITICAL DISTANCES; INTERFACE CRACKS; SPECIMENS; STRENGTH; FAILURE; ENERGY;
D O I
10.1111/ffe.12665
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Experimental and theoretical works are performed on the mixed-mode I/II brittle fracture of cement concrete tested by edge cracked semicircular bend specimens. Theoretical background of the traditional fracture criteria including strain energy density, maximum tangential stress, and maximum tangential strain (MTSN) are introduced. The ability of each fracture criterion in prediction of the fracture test data is investigated. The comparison between the evaluations by the traditional criteria and the experimental data shows that none of them are capable of successfully estimating the fracture resistance of cement concrete. An enhanced version of the MTSN criterion is then employed to predict the test data. It is demonstrated that the extended MTSN criterion can successfully predict the test data in a higher accuracy than traditional criteria.
引用
收藏
页码:129 / 137
页数:9
相关论文
共 50 条
  • [1] Strain-based criteria for mixed-mode fracture of polycrystalline graphite
    Mirsayar, M. M.
    Berto, F.
    Aliha, M. R. M.
    Park, P.
    ENGINEERING FRACTURE MECHANICS, 2016, 156 : 114 - 123
  • [2] Evaluation of the strain-based partitioning method for mixed-mode I plus II fracture of bi-material cracks
    Arouche, Marcio Moreira
    de Freitas, Sofia Teixeira
    de Barros, Silvio
    JOURNAL OF ADHESION, 2022, 98 (06): : 577 - 605
  • [3] Mixed mode brittle fracture analysis of high strength cement mortar using strain-based criteria
    Mirsayar, M. M.
    Park, P.
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2016, 86 : 233 - 238
  • [4] Finite element simulation of mixed-mode I-II dynamic fracture of concrete based on an initial fracture toughness-based criterion
    Zhang, Wang
    Wang, Hongwei
    Zheng, Jianjun
    Wu, Zhimin
    ENGINEERING FRACTURE MECHANICS, 2024, 298
  • [5] Research on Pure Modes I and II and Mixed-Mode (I/II) Fracture Toughness of Geopolymer Fiber-Reinforced Concrete
    Karthik, Sundaravadivelu
    Mohan, Kaliyaperumal Saravana Raja
    Murali, Gunasekaran
    Ravindran, Gobinath
    ADVANCES IN CIVIL ENGINEERING, 2023, 2023
  • [6] Experimental Study on Mixed-Mode (I–II) Fracture Toughness of Freshwater Ice
    Yaozhong Xu
    Mao Zhou
    Xian Yi
    Wen Hua
    Jiuzhou Huang
    Wenyu Zhang
    Shiming Dong
    Acta Mechanica Solida Sinica, 2024, 37 : 252 - 264
  • [7] Experimental and theoretical investigation of mixed-mode I/II and I/III fracture behavior of PUR foams using a novel strain-based criterion
    Shahbazian, B.
    Mirsayar, M. M.
    Aliha, M. R. M.
    Darvish, Moharam Ghahramani
    Asadi, Mohammad Mahdi
    Haghighatpour, Pegah Jafari
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2022, 258
  • [8] The influence of temperatures on mixed-mode (I plus II) and mode-II fracture toughness of sandstone
    Feng, Gan
    Kang, Yong
    Chen, Feng
    Liu, Yi-wei
    Wang, Xiao-chuan
    ENGINEERING FRACTURE MECHANICS, 2018, 189 : 51 - 63
  • [9] Effect of T-stress on the initial fracture toughness of concrete under I/II mixed-mode loading
    Zhao, Yanhua
    Dong, Wei
    Xu, Bohan
    Liu, Jin
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2018, 96 : 699 - 706
  • [10] Effect of polypropylene fibers on the mode I, mode II, and mixed-mode fracture toughness and crack propagation in fiber-reinforced concrete
    Jorbat, Mitra Hatami
    Hosseini, Mehdi
    Mahdikhani, Mahdi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 109