A Study of Bio-Active Coating of Al2O3, Egg and Sea Shell Powder on Ss316l and Ti-6al-4v

被引：3
|
作者：
Venkatesh, N. [1 ]
Hanumantharaju, H. G. [2 ]
Aravind [3 ]
Jacob [2 ]
机构：
[1] EWIT, Dept Mech Engn, Bangalore 560091, Karnataka, India
[2] UVCE, Dept Mech Engn, Bangalore 560001, Karnataka, India
[3] Aravinds Diabet Ctr, Bangalore 560079, Karnataka, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 10期
关键词：
coated specimen; implant material; egg shell; SEM;
D O I：
10.1016/j.matpr.2018.06.645
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Stainless steel 316L and Ti-6Al-4V are widely used in Medical field due to its corrosion resistance, good wear properties and mechanical properties. In this study, in order to increase the life span of the bio implants, bio active coating materials are applied on the stainless steel and Ti-6Al-4V. Hydroxyapatite (HAP) which is currently used as coating material, it is very expensive. Developing alternative bio active materials to replace Hydroxyapatite (HAP). Al2O3, egg shell and seashell powder which are easily available and economical and to find a better suitable material to replace HAP. These coating materials are used to protect the surface of the implant material and interface with biological system. Plasma spray method is used to coat on stainless steel 316L and Ti-6Al-4V. The coated specimens are examined for the quality of coating by using scanning electron microscopy (SEM). The SEM images are compared with the results of HAP coated Image to draw a better conclusion. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码：22687 / 22693
页数：7
相关论文
共 50 条
  • [41] Laser powder bed fusion (L-PBF) of Ti-6Al-4V/Ti-6Al-2Sn-4Zr-2Mo and Ti-6Al-4V/γ-TiAl bimetals: Processability, interface and mechanical properties
    Fan, Haiyang
    Wang, Chengcheng
    Tian, Yujia
    Zhou, Kun
    Yang, Shoufeng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 871
  • [42] Powder Processing and Coating Heat Treatment on Cold Sprayed Ti-6Al-4V Alloy
    Wong, Wilson
    Irissou, Eric
    Legoux, J. G.
    Vo, P.
    Yue, S.
    THERMEC 2011, PTS 1-4, 2012, 706-709 : 258 - +
  • [43] Characterization of the electrolytic ZrO2 coating on Ti-6Al-4V
    Yen, SK
    Huang, TY
    MATERIALS CHEMISTRY AND PHYSICS, 1998, 56 (03) : 214 - 221
  • [44] Improvement in the Oxidation Resistance of Ti-6Al-4V Alloy by Sol-gel Derived Al2O3 Film
    Zhang, X. J.
    Ren, B. Y.
    Sheng, Y. G.
    Tsubaki, N.
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2009, 28 (04) : 223 - 231
  • [45] 反应层厚度对Al2O3/AgCuTi/Ti-6Al-4V接头强度的影响
    吴铭方
    于治水
    蒋成禹
    祁凯
    程晓农
    稀有金属材料与工程, 2000, (06) : 419 - 422
  • [46] Microstructural response and wear behaviour of Ti-6Al-4V impregnated with Ni/Al2O3 + TiO2 nanostructured coating using an electric arc
    Kavian Cooke
    Abdulrahman Alhubaida
    Scientific Reports, 12
  • [47] Oxidation behavior of the Y2O3-modified aluminide coating on Ti-6Al-4V alloy
    Zhou, W.
    Zhao, Y. G.
    Li, W.
    Tian, B.
    Hu, S. W.
    Qin, Q. D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 458 (1-2): : 34 - 38
  • [48] SiO2-Al2O3-glass composite coating on Ti-6Al-4V alloy: Oxidation and interfacial reaction behavior
    Li, Wenbo
    Zhu, Shenglong
    Wang, Cheng
    Chen, Minghui
    Shen, Mingli
    Wang, Fuhui
    CORROSION SCIENCE, 2013, 74 : 367 - 378
  • [49] The effect of pH value on the corrosion behaviour of Ti-6Al-4V and 316L SS alloys under physiological environment
    Rozali A.A.
    Masdek N.R.N.
    Murad M.C.
    Salleh Z.
    Hyie K.M.
    Chemical Engineering Transactions, 2018, 63 : 769 - 774
  • [50] The Effect of Coating Thickness on Corrosion Resistance of Hydroxyapatite Coated Ti6Al4V and 316L SS Implants
    Aksakal, B.
    Gavgali, M.
    Dikici, B.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2010, 19 (06) : 894 - 899
12345