Surface buffing and its effect on chloride induced SCC of 304L austenitic stainless steel

被引：3
|
作者：
Kumar, Pandu Sunil [1 ]
Acharyya, Swati Ghosh [1 ]
Rao, S. V. Ramana [2 ]
Kapoor, Komal [2 ]
机构：
[1] Univ Hyderabad, Sch Engn Sci & Technol, Hyderabad 500046, India
[2] Govt India, Dept Atom Energy, Nucl Fuel Complex, Hyderabad 500062, India
来源：
INTERNATIONAL CONFERENCE ON ADVANCES IN METALLURGY, MATERIALS AND MANUFACTURING | 2018年 / 314卷
关键词：
STRESS-CORROSION CRACKING; TRANSFORMATION;
D O I：
10.1088/1757-899X/314/1/012002
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The study focuses on the impact of buffing operation on the stress corrosion cracking (SCC) susceptibility of 304L austenitic stainless steel (SS). The SCC susceptibility of the buffed surfaces were determined by testing in boiling magnesium chloride (MgCl2) environment as per ASTM G 36. Test was conducted for 3hr, 9hr and 72hr to study the SCC susceptibility. Buffed surfaces were resistant to SCC even after 72hr of exposure to boiling MgCl2. The surface and cross section of the samples were examined for both before and after exposure to boiling MgCl2 and was characterized using optical microscopy. The study revealed that buffing operation induces compressive residual stresses on the surface, which helps in protecting the surface from SCC.
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Distinguishing effect of buffing vs. grinding, milling and turning operations on the chloride induced SCC susceptibility of 304L austenitic stainless steel
    Kumar, Pandu Sunil
    Acharyya, Swati Ghosh
    Rao, S. V. Ramana
    Kapoor, Komal
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 687 : 193 - 199
  • [2] Effect of surface grinding on chloride induced SCC of 304L
    Zhou, Nian
    Pettersson, Rachel
    Peng, Ru Lin
    Schonning, Mikael
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 658 : 50 - 59
  • [3] Hydrogen effect on nitriding process of 304L austenitic stainless steel
    Garamoon, A.
    Rashed, U. M.
    Abouelela, A.
    Eissa, M. A.
    Saudi, A. H.
    El-zeer, D. M.
    El-Hossary, F.
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2006, 34 (04) : 1066 - 1073
  • [4] Effect of Copper Addition on the Formability of 304L Austenitic Stainless Steel
    Ali Huang
    Keping Wang
    Yangyang Zhao
    Wurong Wang
    Xicheng Wei
    Jingguang Peng
    Journal of Materials Engineering and Performance, 2023, 32 : 3563 - 3570
  • [5] Effect of Copper Addition on the Formability of 304L Austenitic Stainless Steel
    Huang, Ali
    Wang, Keping
    Zhao, Yangyang
    Wang, Wurong
    Wei, Xicheng
    Peng, Jingguang
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (08) : 3563 - 3570
  • [6] A Review on Welding of AISI 304L Austenitic Stainless Steel
    Prasad, Kondapalli Siva
    Rao, Chalamalasetti Srinivasa
    Rao, Damera Nageswara
    JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2014, 14 (01) : 1 - 11
  • [7] Effect of martensitic transformation on springback behavior of 304L austenitic stainless steel
    Fathi, H.
    Semnani, H. R. Mohammadian
    Emadoddin, E.
    Sadeghi, B. Mohammad
    MATERIALS RESEARCH EXPRESS, 2017, 4 (09):
  • [8] Effect of grain size on pitting corrosion of 304L austenitic stainless steel
    Aghuy, A. Abbasi
    Zakeri, M.
    Moayed, M. H.
    Mazinani, M.
    CORROSION SCIENCE, 2015, 94 : 368 - 376
  • [9] Effect of Oxidation on Corrosion behavior of Austenitic Stainless Steel 304L Welds
    Kumar, Sunil B.
    Kain, Vivekanand
    Banerjee, K.
    Maniyar, P. D.
    Sridhar, S.
    Kumar, Jitendra
    Kumar, Jatin
    CENTURY OF STAINLESS STEELS, 2013, 794 : 598 - +
  • [10] Microstructures of laser deposited 304L austenitic stainless steel
    Brooks, JA
    Headley, TJ
    Robino, CV
    SOLID FREEFORM AND ADDITIVE FABRICATION-2000, 2000, 625 : 21 - 30
12345