Effect of Pressure on Tribological Characteristics between Sintered Friction Materials and Steel Disk

被引:8
|
作者
Kim, Sang Ho [1 ]
Lee, Hi Sung [1 ]
机构
[1] Seoul Natl Univ Sci & Technol, Grad Sch Railroad, Seoul 139743, South Korea
来源
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | 2011年 / 12卷 / 04期
关键词
Sintered friction materials; Friction coefficient; Wear rate; Oxidation layer; Fe(2)O(3); LOW-ALLOY STEEL; OXIDATIONAL WEAR; MILD WEAR; TEMPERATURES;
D O I
10.1007/s12541-011-0083-y
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect pressure on tribological characteristics between sintered metallic material and low alloy heat resistance steel was investigated under dry sliding condition with lab-scale dynamometer. Tests were conducted under continuous speed at 8m/s with various pressures. The results were analyzed with SEM (scanning electronic microscopy) and X-ray diffraction. Wear rate of friction materials was change with morphology of friction surface. Stable tribolayers at friction surface affect wear rate of friction material. Tribolayer which formed both friction surfaces was Fe(2)O(3). Contact temperature was as high as 385 degrees C at 1.0MPa. Also, high brake pressure promotes an increase in height difference on friction materials' contact surface thus trap wear debris which consider to increase friction coefficient.
引用
收藏
页码:643 / 650
页数:8
相关论文
共 50 条
  • [21] Tribological Characteristics of Binder Resins for Brake Friction Materials at Elevated Temperatures
    M. W. Shin
    K. H. Cho
    W. K. Lee
    H. Jang
    Tribology Letters, 2010, 38 : 161 - 168
  • [22] Effect of resins on thermal, mechanical and tribological properties of friction materials
    Cai, Peng
    Wang, Yanming
    Wang, Tingmei
    Wang, Qihua
    TRIBOLOGY INTERNATIONAL, 2015, 87 : 1 - 10
  • [23] Effectiveness of high-frequency ultrasonic peening treatment on the tribological characteristics of Cu-based sintered materials on steel substrate
    Amanov, Auezhan
    Cho, In-Sik
    Kim, Dae-Eun
    MATERIALS & DESIGN, 2013, 45 : 118 - 124
  • [24] The effect of lubricants on tribological characteristics of fibrous materials
    T. Yu. Stepanova
    Journal of Friction and Wear, 2016, 37 : 430 - 434
  • [25] The effect of lubricants on tribological characteristics of fibrous materials
    Stepanova, T. Yu.
    JOURNAL OF FRICTION AND WEAR, 2016, 37 (05) : 430 - 434
  • [26] Effects of oxide layer on the friction characteristics between TiN coated ball and steel disk in dry sliding
    Cho, CW
    Lee, YZ
    WEAR, 2003, 254 (3-4) : 383 - 390
  • [27] SYNERGISTIC EFFECT OF ORGANIC- AND CERAMIC-BASED INGREDIENTS ON THE TRIBOLOGICAL CHARACTERISTICS OF BRAKE FRICTION MATERIALS
    Ertan, Rukiye
    MATERIALI IN TEHNOLOGIJE, 2016, 50 (02): : 223 - 228
  • [28] EFFECT OF SINTERING TEMPERATURE AND PRESSURE ON SINTERED AND FRICTION PROPERTIES OF A CU BASE FRICTION MATERIAL
    KIM, JW
    KANG, BS
    KANG, SS
    KANG, SJL
    POWDER METALLURGY INTERNATIONAL, 1988, 20 (03): : 32 - 34
  • [29] Tribological Properties and Oil Flow Observation of Porous Sintered Metal with Dimple Texturing by Block-on-Disk Friction Tester
    Omura, Ayako
    Korenaga, Atsushi
    Mano, Hiroki
    Ohana, Tsuguyori
    Aso, Shinobu
    Sadakata, Kazuki
    Tanabe, Shigeyuki
    Akiyama, Yuji
    Habuki, Fumio
    TRIBOLOGY ONLINE, 2019, 14 (04) : 173 - 178
  • [30] Effect of sliding mating materials on vacuum tribological behaviors of sintered polycrystalline diamond
    Sha, Xiaohua
    Yue, Wen
    Zhao, Yihui
    Lin, Fang
    Wang, Chengbiao
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2016, 54 : 116 - 126