INFLUENCE OF THE TOOL GEOMETRY AND PROCESS PARAMETERS ON THE STATIC STRENGTH AND HARDNESS OF FRICTION-STIR SPOT-WELDED ALUMINIUM-ALLOY SHEETS

被引：3
|
作者：
Guler, Hande [1 ]
机构：
[1] Uludag Univ, Fac Engn, Dept Mech Engn, TR-16059 Gorukle, Turkey
来源：
MATERIALI IN TEHNOLOGIJE | 2015年 / 49卷 / 03期
关键词：
Al-alloys; friction-stir spot welding; mechanical properties; hardness;
D O I：
10.17222/mit.2014.087
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, the effects of the tool geometry and welding parameters on the friction-stir spot-welding properties of AA 5754-H111 were studied. Two different tool-pin geometries were used and tensile shear tests were carried out to compare the weld strength. Hardness observations were also done. The optimum tool geometry for the mentioned material was determined as the circular pin tool and the tapered pin tool gave the lowest tensile shear load.
引用
收藏
页码：457 / 460
页数：4
相关论文
共 50 条
  • [31] Influences of Process Parameters on Tensile Strength of Friction Stir Welded Cast A319 Aluminium Alloy Joints
    Jayaraman, M.
    Sivasubramanian, R.
    Balasubramanian, V.
    Babu, S.
    METALS AND MATERIALS INTERNATIONAL, 2009, 15 (02) : 313 - 320
  • [32] THE INFLUENCE OF PROCESS PARAMETERS AND TOOL GEOMETRY ON MECHANICAL PROPERTIES OF FRICTION STIR WELDED ALUMINUM LAP JOINTS
    D'Urso, G.
    Giardini, C.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2010, 3 : 1011 - 1014
  • [33] The influence of process parameters and tool geometry on mechanical properties of friction stir welded aluminum lap joints
    G. D’Urso
    C. Giardini
    International Journal of Material Forming, 2010, 3 : 1011 - 1014
  • [34] Effect of Tool Geometry on Fatigue Properties and Fracture Behavior of Friction Stir Spot Welded Aluminum Sheets
    Lin, Ben-Yuan
    Liu, Ju-Jen
    JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2013, 34 (04): : 277 - 284
  • [35] Influence of Welding Parameters and Tool Geometry on the Mechanical Performance of Friction Stir Spot Welded Al-Mg Alloys
    Echeverria, A.
    Zabaleta, A.
    Alvarez, P.
    Aldanondo, E.
    Solis, J.
    da Silva, A. A. M.
    TRENDS IN WELDING RESEARCH, 2009, : 364 - 370
  • [36] Microstructure, mechanical properties and failure behaviour of protrusion friction stir spot welded 2024 aluminium alloy sheets
    Dourandish, S.
    Mousavizade, S. M.
    Ezatpour, H. R.
    Ebrahimi, G. R.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2018, 23 (04) : 295 - 307
  • [37] Dependence of ultimate tensile strength of friction stir welded AA2024-T6 aluminium alloy on friction stir welding process parameters
    Sundaram, N. Shanmuga
    Murugan, N.
    MECHANIKA, 2009, (04): : 17 - 24
  • [38] Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminium alloy
    Scialpi, A.
    De Filippis, L. A. C.
    Cavaliere, P.
    MATERIALS & DESIGN, 2007, 28 (04) : 1124 - 1129
  • [39] Friction stir welding of aluminum alloy with varying tool geometry and process parameters
    Biswas, P.
    Kumar, D. A.
    Mandal, N. R.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2012, 226 (B4) : 641 - 648
  • [40] Influence of Shoulder Geometry and Coating of the Tool on the Friction Stir Welding of Aluminium Alloy Plates
    Casalino, Giuseppe
    Campanelli, Sabina
    Mortello, Michelangelo
    24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013, 2014, 69 : 1541 - 1548
12345