Structure and Properties of Sintered Silicon-Manganese Steels

被引：0
|
作者：
Sosnovskii, L. A. [1 ]
Baglyuk, G. A. [1 ]
Vlasova, O. V. [1 ]
Golovkova, M. E. [1 ]
机构：
[1] Natl Acad Sci Ukraine, Frantsevich Inst Problems Mat Sci, Kiev, Ukraine
来源：
POWDER METALLURGY AND METAL CERAMICS | 2015年 / 53卷 / 11-12期
关键词：
steel; powder; sintering; alloying; manganese silicide; density; hardness; strength; ligature;
D O I：
10.1007/s11106-015-9671-1
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effect of the content of manganese silicide (MnSi1.77) additive in the original charge and sintering temperature on the structure and properties of sintered steels is investigated. It is shown that adding manganese silicide slightly decreases the density of sintered samples, but significantly increases the hardness and strength properties of the alloys. An electron microprobe analysis of sintered steels establishes that manganese is relatively uniformly distributed in iron particles, whereas the distribution of silicon is significantly different: its higher concentration is mainly seen along the grain boundaries.
引用
收藏
页码：657 / 662
页数：6
相关论文
共 50 条
  • [41] OPTIMUM TECHNOLOGY FOR MELTING THE STEEL FOR SILICON-MANGANESE WELDING WIRES
    ULYANOV, VI
    DYACHENKO, AS
    MOROZOV, AD
    NETREBA, VN
    MOROZOV, VB
    GUBAR, VF
    SERBIN, VA
    AUTOMATIC WELDING USSR, 1983, 36 (09): : 47 - 48
  • [42] INCLUSIONS IN IRON INGOTS DEOXIDIZED WITH MANGANESE OR SILICON-MANGANESE IN AN ALUMINA CRUCIBLE AND SOLIDIFIED UNIDIRECTIONALLY
    ARITOMI, N
    GUNJI, K
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1983, 23 (06) : 530 - 538
  • [43] GROWTH AND CHANGE OF DEOXIDATION PRODUCTS IN DEOXIDATION WITH SILICON AND SILICON-MANGANESE IN LIQUID-IRON
    HOSODA, H
    SANO, N
    MATSUSHITA, Y
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1976, 16 (02) : 115 - 121
  • [44] SINTERED MANGANESE STEELS - 1. EFFECT OF STRUCTURE OF INITIAL IRON POWDERS UPON MECHANICAL PROPERTIES.
    Salak, A.
    PMI. Powder metallurgy international, 1980, 12 (01): : 28 - 31
  • [45] SINTERED MANGANESE STEELS .1. EFFECT OF STRUCTURE OF INITIAL IRON POWDERS UPON MECHANICAL-PROPERTIES
    SALAK, A
    POWDER METALLURGY INTERNATIONAL, 1980, 12 (01): : 28 - 31
  • [46] Manganese assisted pack boriding of sintered steels
    Šalak, A.
    Selecká, M.
    Danninger, H.
    2001, American Powder Metallurgy Institute (37):
  • [47] Mechanical and Tribological Characteristics of Sintered Manganese Steels
    Selecka, Marcela
    Salak, Andrej
    Jakubeczyova, Dagmar
    RESEARCHES IN POWDER METALLURGY, 2011, 672 : 59 - 62
  • [48] GROWTH AND CHANGE OF DEOXIDATION PRODUCTS IN DEOXIDATION WITH SILICON AND SILICON-MANGANESE IN LIQUID IRON.
    Hosoda, Hideto
    Sano, Nobuo
    Matsushita, Yukio
    1976, 16 (02): : 115 - 121
  • [49] Manganese assisted pack boriding of sintered steels
    Salak, A
    Selecká, M
    Danninger, H
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 2001, 37 (04): : 53 - 60
  • [50] Critical Aspects of Alloying of Sintered Steels with Manganese
    Hryha, Eduard
    Dudrova, Eva
    Nyborg, Lars
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (11): : 2880 - 2897
12345