Scalable Planar Active Array Antenna Integrated With Distributed Amplifying Transistors for High-Power Applications

A scalable planar 2-D active array antenna configuration that can realize amplified radiation through co-existing active devices is proposed, studied, and demonstrated in this work. The input and output of these amplifying active devices are directly integrated with the feed network and array elements, respectively, thereby eliminating the matching networks typically required in an amplifier circuit. A comprehensive analysis of the rectangular patch antenna (RPA) performance with different feeding techniques is initially analyzed and the choice of nonradiating edge feed RPA as array elements is justified for not only realizing the maximum radiation efficiency but also facilitating the direct active device integration. Subsequently, a physical arrangement of these array elements is devised to reduce cross-polarization. The design of 4 x 2 active array antenna unit cell operating at 5.8 GHz is then discussed through extensive analysis of active devices, optimization procedure, potential excitation signal control, and influence of faulty transistors. From simulations, this active array scheme has realized a higher matching bandwidth and exhibited an amplifier gain of around 13.6 dB, compared with its passive counterpart. Eventually, these unit cells are integrated through an equal power hybrid feed network for realizing an 8 x 8 active array antenna configuration that is fabricated and measured. The measured results of the experimental prototype match reasonably well with the simulation results, thereby confirming the proposed integration technique. The resulting paralleled configuration promises efficient handling of greater powers, making them suitable for high-power applications.