Effects of aspect ratio and mushy-zone parameter on melting performance of a thermal energy storage unit filled with phase change material

An intermittent supply of energy from renewable or unconventional resources has resulted in the use of phase change materials (PCM) in thermal energy storage (TES) systems. In this work, melting and heat transfer characteristics in a rectangular enclosure of different aspect ratios (width to height) filled with a phase change material (PCM) have been studied numerically. The n-octadecane has been selected as the PCM (melting temp = 301.35 K, Prandtl number similar to 60). We considered five different aspect ratios (AR) of the enclosure to delineate the effects of 9-fold variation in the aspect ratio. The simulations were carried out using ANSYS Fluent 19.2. In particular, extensive results have been presented and discussed in terms of the temperature contours, rate of melting and energy storage, and total time required to reach the fully melt condition. Additionally, the effect of the mushy zone parameter (A(mush)) on the melting performance has also been investigated. Low values of the A(mush) were seen to predict the higher rate of melting. At a fixed value of A(mush), similar to 3 times faster melting rate was observed as the value of AR was reduced from 3 to 1/3. Finally, it can be concluded that melting and energy storage rate largely depends on the aspect ratio of the enclosure and the optimal choice of the value of the A(mush).