Optimization of Cutting Process Parameters on AL6061 Using ANOVA and TAGUCHI Method

被引：0
|
作者：
Niranjan, D. B. [1 ]
Shivashankar, G. S. [1 ]
Rao, Sreenivas K., V [1 ]
Praveen, R. [2 ]
机构：
[1] SIT, Dept Mech Engn, Tumkur 572103, Karnataka, India
[2] PESITM, Dept Mech Engn, Shimoga 577204, Karnataka, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 10期
关键词：
Surface roughness; Material removal rate; ANOVA; Taguchi method;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Aluminium is the most abundant metal in the Earth's crust and it is also the second most widely used metal in the world. It has a very good machinability index and there is a need to increase the production while reducing the cost. In this research work, an attempt is made to optimize the cutting parameters such as cutting speed, feed rate and depth of cut in the turning operation of Aluminium Alloy 6061 T6 cylindrical rods using Taguchi method and Analysis of Variance (ANOVA). Better quality of the surface finish is obtained with cutting speed 429 m/min, feed rate 0.05mm/min and depth of cut 1mm. These process parameters are considered as optimum process parameters (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：10845 / 10849
页数：5
相关论文
共 50 条
  • [1] Optimization of the Cutting Fluids and Parameters Using Taguchi and ANOVA in Milling
    Kuram, E.
    Simsek, B. T.
    Ozcelik, B.
    Demirbas, E.
    Askin, S.
    [J]. WORLD CONGRESS ON ENGINEERING, WCE 2010, VOL II, 2010, : 1292 - 1296
  • [2] Optimization of Wear Process Parameters of Al6061-Zircon Composites Using Taguchi Method
    Vijayakumar, R.
    Srikantamurthy, J.S.
    Patil, Shanawaz
    Rudresha, S.
    Manjunatha, A.
    Hemanth Raju, T.
    Lenin, A. Haiter
    [J]. Advances in Materials Science and Engineering, 2023, 2023
  • [3] Optimization of Process Parameters in Surface Finishing of Al6061 by using Magnetic Abrasive Finishing Process
    Kishore, D. Sai Chaitanya
    Basha, S. M. Jameel
    [J]. MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 3365 - 3370
  • [4] Optimization of Cutting Parameters for Minimization of Cutting Temperature and Surface Roughness in Turning of Al6061 Alloy
    Rajesh, N.
    Yohan, M.
    Venkataramaiah, P.
    Pallavi, M. Vani
    [J]. MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) : 8624 - 8632
  • [5] Experimental Investigation of HSS Face Milling to AL6061 using Taguchi Method
    Baharudin, B. T. H. T.
    Ibrahim, M. R.
    Ismail, N.
    Leman, Z.
    Ariffin, M. K. A.
    Majid, D. L.
    [J]. INTERNATIONAL CONFERENCE ON ADVANCES SCIENCE AND CONTEMPORARY ENGINEERING 2012, 2012, 50 : 933 - 941
  • [6] Optimization of cutting parameters for minimizing energy consumption in turning of AISI 6061 T6 using Taguchi methodology and ANOVA
    Camposeco-Negrete, Carmita
    [J]. JOURNAL OF CLEANER PRODUCTION, 2013, 53 : 195 - 203
  • [7] Optimization of vacuum brazing process parameters in AA6061 using Taguchi method
    Lin, Huei
    Hwang, Jiun-Ren
    Fung, Chin-Ping
    [J]. JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2016, 10 (02):
  • [8] Modelling of extrusion process and application of Taguchi method and ANOVA analysis for optimization the parameters
    Hosseini, A.
    Farhangdoost, Kh.
    Manoochehri, M.
    [J]. MECHANIKA, 2012, (03): : 301 - 305
  • [9] Optimization of Cutting Parameters in Drilling Of AISI 304 Stainless Steel Using Taguchi and ANOVA
    Balaji, M.
    Murthy, B. S. N.
    Rao, N. Mohan
    [J]. 1ST GLOBAL COLLOQUIUM ON RECENT ADVANCEMENTS AND EFFECTUAL RESEARCHES IN ENGINEERING, SCIENCE AND TECHNOLOGY - RAEREST 2016, 2016, 25 : 1106 - 1113
  • [10] Optimization of Process Parameters for Increasing Material Removal Rate for Turning Al6061 Using S/N ratio
    Rajendra, B.
    Deepak, D.
    [J]. INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN ENGINEERING, SCIENCE AND TECHNOLOGY (ICETEST - 2015), 2016, 24 : 399 - 405
12345