Effect of low frequency burner vibrations on the characteristics of jet diffusion flames

被引：5

作者：

Kanthasamy, C. ^{[1
]}

Raghavan, Vasudevan ^{[1
]}

Srinivasan, K. ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Mech Engn, Madras 600036, Tamil Nadu, India

来源：

INTERNATIONAL JOURNAL OF SPRAY AND COMBUSTION DYNAMICS | 2012年 / 4卷 / 01期

关键词：

FLICKERING METHANE; SOOT PRODUCTION; COMBUSTION;

D O I：

10.1260/1756-8277.4.1.77

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Mechanical vibrations introduced in diffusion flame burners significantly affect the flame characteristics. In this experimental study, the effects of axial vibrations on the characteristics of laminar diffusion flames are investigated systematically. The effect of the frequency and amplitude of the vibrations on the flame height oscillations and flame stability is brought out. The amplitude of flame height oscillations is found to increase with increase in both frequency and amplitude of burner vibrations. Vibrations are shown to enhance stability of diffusion flames. Although flame lifts-off sooner with vibrations, stability of the flame increases.

引用

页码：77 / 96

页数：20

共 50 条

[11] Forced low-frequency spray characteristics of a generic airblast swirl diffusion burner
Eckstein, J
Freitag, E
Hirsch, C
Sattelmayer, T
von der Bank, R
Schilling, T
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2005, 127 (02): : 301 - 306
[12] BLOW-OUT STABILITY OF GASEOUS JET DIFFUSION FLAMES .3. EFFECT OF BURNER ORIENTATION TO WIND DIRECTION
KALGHATGI, GT
COMBUSTION SCIENCE AND TECHNOLOGY, 1982, 28 (5-6) : 241 - 245
[13] From diffusion to premixed flames in an H2/air opposed-jet burner:: The role of edge flames
Frouzakis, CE
Tomboulides, AG
Lee, J
Boulouchos, K
COMBUSTION AND FLAME, 2002, 130 (03) : 171 - 184
[14] Effect of Burner Geometry on Heat Transfer Characteristics of an Impinging Inverse Diffusion Flame Jet with Swirl
Shankar Badiger
V. V. Katti
Vijaykumar Hindasageri
T. R. Anil
Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2021, 45 : 215 - 228
[15] Effect of Burner Geometry on Heat Transfer Characteristics of an Impinging Inverse Diffusion Flame Jet with Swirl
Badiger, Shankar
Katti, V. V.
Hindasageri, Vijaykumar
Anil, T. R.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING, 2021, 45 (01) : 215 - 228
[16] Fuel mixing effect on the flickering of jet diffusion flames
Li, J.
Zhang, Y.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2011, 225 (C1) : 155 - 162
[17] Experiments on the transient effect of evolving jet diffusion flames
Lee, EJ
Oh, KC
Shin, HD
PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2000, 28 (02) : 2079 - 2084
[18] AERODYNAMIC CHARACTERISTICS OF VORTEX BURNER FLAMES
SHAGALOVA, SL
SHNITSER, IN
PARPAROV, DI
THERMAL ENGINEERING, 1969, 16 (06) : 39 - +
[19] Burner-generated spherical diffusion flames
Mills, K
Matalon, M
COMBUSTION SCIENCE AND TECHNOLOGY, 1997, 129 (1-6) : 295 - 319
[20] Structures of inverse jet flames stabilized on a coaxial burner
Kapusta, Lukasz Jan
Shuang, Chen
Alden, Marcus
Li, Zhongshan
ENERGY, 2020, 193 (193) : 1164 - 1173

← 1 2 3 4 5 →