Creep Age Forming of Fiber Metal Laminates: Effects of Process Time and Temperature and Stacking Sequence of Core Material

被引：4
|
作者：
Safari, Mehdi [1 ]
de Sousa, Ricardo Alves [2 ]
Fernandes, Fabio [2 ]
Salamat-Talab, Mazaher [1 ]
Abdollahzadeh, Arash [1 ]
机构：
[1] Arak Univ Technol, Dept Mech Engn, Arak 381818411, Iran
[2] Univ Aveiro, Dept Mech Engn, Ctr Mech Technol Automat, Campus Santiago, P-3810183 Aveiro, Portugal
来源：
MATERIALS | 2021年 / 14卷 / 24期
关键词：
creep age forming; fiber metal laminate; time; temperature; layout of fibers; SPRINGBACK; BEHAVIOR;
D O I：
10.3390/ma14247881
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Fiber metal laminates (FMLs) are a type of hybrid materials interlacing composites and metals. In the present work, FMLs with aluminum alloy 6061 as the skin and E-glass fiber-reinforced polypropylene (PP) as the core material are fabricated and formed by the creep age forming (CAF) process. The effects of time and temperature as the process parameters and thickness and stacking sequences of composites layers as the FML parameters are evaluated on the springback of glass-reinforced aluminum laminates (GLARE) FMLs. After the CAF process, the springback of creep age-formed FMLs is calculated. The results show that the FMLs can be successfully formed with the CAF process by considering appropriate time and temperature. In addition, the stacking sequence of composite layers can affect the springback behavior of FMLs significantly.
引用
收藏
页数：12
相关论文
共 40 条
  • [31] Characterising material and process variation effects on springback robustness for a semi-cylindrical sheet metal forming process
    de Souza, T.
    Rolfe, B. F.
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2010, 52 (12) : 1756 - 1766
  • [32] Temperature-dependent anisotropic material modeling of the sheet metal component within the polymer injection forming process
    Behrens, Bernd-Arno
    Goetze, Tobias
    PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT, 2014, 8 (1-2): : 91 - 99
  • [33] Metal-organic-coordinated supramolecular material filled hollow core photonic crystal fiber for temperature sensor
    Yu, Y. (yuyq@szu.edu.cn), 1600, Science Press (10):
  • [34] Ultrasonic-assisted preparation-forming-curing process for ultra-thin micro-fiber metal laminates: Deformation characteristics
    Wang, Yao
    Hou, Yingzhao
    Liu, Yang
    Hu, Ning
    Cheng, E.
    Lang, Lihui
    MATERIALS & DESIGN, 2020, 195
  • [35] Investigation on the influence of temperature, pressure and curing time on the mechanical properties of metal skins and CFRP core sandwich panels manufactured by means of curing-by-forming process
    Kim, Yonghee
    Jang, Changsoon
    Kim, Naksoo
    Quagliato, Luca
    PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019), 2019, 2113
  • [36] Tensile and flexural damage response of symmetric angle-ply carbon fiber-reinforced epoxy laminates: Non-linear response and effects of thickness and ply-stacking sequence
    Angel Caminero, Miguel
    Patricia Rodriguez, Gloria
    Miguel Chacon, Jesus
    Garcia-Moreno, Irene
    POLYMER COMPOSITES, 2019, 40 (09) : 3678 - 3690
  • [37] Effects of curing time and de-molding temperature on the deformation of glass fiber/epoxy resin prepreg laminates fabricated by rapid hot press
    Zhang, Kaomin
    Gu, Yizhuo
    Li, Min
    Wang, Shaokai
    Zhang, Zuoguang
    POLYMERS & POLYMER COMPOSITES, 2019, 27 (06): : 301 - 313
  • [38] Effects of the methyl methacrylate addition, polymerization temperature and time on the MBG@PMMA core-shell structure and its application as addition in electrospun composite fiber bioscaffold
    Lin, Hsiu-Na
    Peng, Tzu-Yu
    Kung, Yu-Ruei
    Chiou, Yuh-Jing
    Chang, Wei-Min
    Wu, Shan-Hua
    Mine, Yuichi
    Chen, Chin-Yi
    Lin, Chung-Kwei
    CERAMICS INTERNATIONAL, 2023, 49 (05) : 7630 - 7639
  • [39] ANALYSIS OF TEMPERATURE DEPENDENCE OF DYNAMIC LOSS TANGENT (TAN delta ) RELATING TO MOLECULAR MOTION OF POLYMER CHAIN IN AMORPHOUS REGION IN FIBER AND FIBER-FORMING POLYMERIC MATERIAL - 2. VISCOELASTIC BODY COMPOSED OF BROAD DISTRIBUTION OF RELAXATION TIME.
    Manabe, Sei-ichi
    Kamide, Kenji
    Nakayama, Chozo
    Journal of the Textile Machinery Society of Japan, 1980, 26 (02) : 42 - 50
  • [40] Effects of creep age forming time on microstructure and high cyclic fatigue of 7075 aluminum alloyAuswirkungen der Kriechalterung-Umformungszeit auf das Gefuge und das zyklische Ermudungsverhalten bei hohen Schwingspielen der Aluminiumlegierung 7075
    Yang, D. L.
    Li, R. J.
    Miao, J. J.
    Zhang, H. X.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2023, 54 (08) : 1047 - 1057
1234