Ionic wind produced by a DC needle-to-plate corona discharge with a gap of 15 mm

被引:31
|
作者
Defoort, Etienne [1 ]
Bellanger, Romain [1 ]
Batiot-Dupeyrat, Catherine [2 ]
Moreau, Eric [1 ]
机构
[1] Univ Poitiers, Pprime Inst, CNRS, ISAE,ENSMA, Teleport 2,BP 30179, F-86962 Futuroscope, France
[2] Univ Poitiers, IC2MP, CNRS, 4 Rue Michel Brunet, F-86000 Poitiers, France
关键词
corona discharge; ionic wind; time-resolved PIV; electrohydrodynamics; townsend's law; streamers and trichel pulses; EFFICIENCY; SURFACE; OZONE; ROLL; NOX;
D O I
10.1088/1361-6463/ab7139
中图分类号
O59 [应用物理学];
学科分类号
摘要
The goal of the present study is to better understand the electrohydrodynamic (EHD) phenomena occurring in 15mm gap point-to-plate corona discharges supplied by positive and negative DC voltages, and to link them to the discharge regime. For that, discharge current measurements have been conducted and a 20kHz Particle Image Velocimetry system has been used to characterize the ionic wind produced by the discharges. The main results are as follows: (a) the Townsend's law can always correctly interpolate the experimental I-V characteristics of a negative corona, even in presence of Trichel pulses, (b) in the case of a positive streamer discharge, the current does not follow the Townsend's law as it evolves in V-k with k = 4 in the present study, (c) Indeed, the discharge current becomes higher than the Townsend's law when the glow-to-streamer regime transition occurs, (d) the ionic wind is unsteady, more especially in the case of a positive corona for which it seems that its velocity is pulsed at the same frequency than the streamer one, (e) when the positive high voltage is switched on, a strong streamer occurs at the end of the voltage rising (t = 25 mu s for +6kV), resulting in an over-velocity region upstream the head of the ionic wind jet that progresses in quiescent air toward the plate, (f) the topology of the time-averaged ionic wind is fully different compared to the one observed in a previous study where the gap was equal to 25mm, (g) in the case of a negative corona, the ionic wind velocity is nearly constant in the electrode gap, (h) in the case of the positive corona, the results are even more surprising since the velocity is minimum at the tip and increases when one approaches the grounded plate, indicating that there is a significant space charge remained by the streamers in the second half of the inter-electrode region, (i) generally speaking, this study highlights that the spatio-temporal characteristics of the EHD force and the resulting ionic wind depend on the distribution of the space charge between both electrodes, the latter being linked to the voltage polarity, the discharge regime and the electrode gap.
引用
收藏
页数:10
相关论文
共 50 条
  • [31] Ionic wind generation by a wire-cylinder-plate corona discharge in air at atmospheric pressure
    Colas, Dorian F.
    Ferret, Antoine
    Pai, David Z.
    Lacoste, Deanna A.
    Laux, Christophe O.
    [J]. JOURNAL OF APPLIED PHYSICS, 2010, 108 (10)
  • [32] Parameter optimization of excited OH radical in multi-needle to plate negative DC corona discharge
    Ge, Hui
    Zhang, Lingling
    Yan, Ling
    Mi, Dong
    Zhu, Yimin
    [J]. JOURNAL OF ELECTROSTATICS, 2011, 69 (06) : 529 - 532
  • [33] Ionic Wind Development in Corona Discharge for LED Cooling
    Wang, Jing
    Cai, Yi-Xi
    Li, Xiao-Hua
    Shi, Yun-Fei
    Bao, Ya-Chao
    Wang, Jun
    Shi, Yun-Xi
    [J]. IEEE TRANSACTIONS ON PLASMA SCIENCE, 2018, 46 (05) : 1821 - 1830
  • [34] Multiphysics simulation of corona discharge induced ionic wind
    Cagnoni, Davide
    Agostini, Francesco
    Christen, Thomas
    Parolini, Nicola
    Stevanovic, Ivica
    de Falco, Carlo
    [J]. JOURNAL OF APPLIED PHYSICS, 2013, 114 (23)
  • [35] Indoor formaldehyde oxidation by needle matrix to plate corona discharge
    Zhu, Y
    Wang, X
    Zhang, M
    Su, P
    Chen, H
    [J]. JOURNAL OF ADVANCED OXIDATION TECHNOLOGIES, 2005, 8 (01) : 112 - 115
  • [36] Transition of the electrohydrodynamic two-phase flow into the single-phase flow in a needle-to-plate negative corona discharge in the finite-volume chamber
    Berendt, A.
    Mizeraczyk, J.
    [J]. JOURNAL OF ELECTROSTATICS, 2016, 84 : 90 - 96
  • [37] Electrohydrodynamic ionic wind, force field, and ionic mobility in a positive dc wire-to-cylinders corona discharge in air
    Monrolin, Nicolas
    Praud, Olivier
    Plouraboue, Franck
    [J]. PHYSICAL REVIEW FLUIDS, 2018, 3 (06):
  • [38] DC corona discharge from a wire particle floated with a micro-gap in parallel plate electrodes
    Kudo, Y
    Sugimoto, T
    Higashiyama, Y
    [J]. CONFERENCE RECORD OF THE 2004 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-4: COVERING THEORY TO PRACTICE, 2004, : 1565 - 1571
  • [39] Flow distribution and pressure of air due to ionic wind in pin-to-plate corona discharge system
    Kawamoto, H.
    Yasuda, H.
    Umezu, S.
    [J]. JOURNAL OF ELECTROSTATICS, 2006, 64 (06) : 400 - 407
  • [40] Experimental investigation of a new solar panels cleaning system using ionic wind produced by corona discharge
    Tilmatine, Amar
    Kadous, Nezha
    Yanallah, Khelifa
    Bellebna, Yassine
    Bendaoudi, Zeid
    Zouaghi, Ayyoub
    [J]. JOURNAL OF ELECTROSTATICS, 2023, 124