Model-based analysis of the mechanical subsystem of an air brake system

被引：9
|
作者：
Sonawane, D. B. [1 ]
Narayan, K. [1 ]
Rao, V. S. [1 ]
Subramanian, S. C. [1 ]
机构：
[1] Indian Inst Technol, Dept Engn Design, Madras 600036, Tamil Nadu, India
来源：
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY | 2011年 / 12卷 / 05期
关键词：
Commercial vehicles; Air brake system; Dynamic analysis;
D O I：
10.1007/s12239-011-0081-1
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Most commercial vehicles such as buses and trucks use an air brake system, often equipped with an S-cam drum brake, to reduce their speed and/or to stop. With a drum brake system, the clearance between the brake shoe/pad and the brake drum may increase because of various reasons such as wearing of the brake shoe and/or brake drum and drum expansion caused by high heat generation during the braking process. Hence, to ensure proper functioning of the brake system, it is essential that the clearance between the brake shoe and the brake drum is monitored. In this paper, we present a mathematical model for the mechanical subsystem of the air brake system that can be used to monitor this clearance. This mathematical model correlates the push rod stroke transients and the brake chamber pressure transients. A kinematic analysis and a dynamic analysis of the mechanical subsystem of the air brake system were performed, and the results are corroborated with experimental data.
引用
收藏
页码：697 / 704
页数：8
相关论文
共 50 条
  • [1] Model-based analysis of the mechanical subsystem of an air brake system
    D. B. Sonawane
    K. Narayan
    V. S. Rao
    S. C. Subramanian
    International Journal of Automotive Technology, 2011, 12 : 697 - 704
  • [2] Model-based control of an electropneumatic brake system for commercial vehicles
    P. Karthikeyan
    D. B. Sonawane
    S. C. Subramanian
    International Journal of Automotive Technology, 2010, 11 : 507 - 515
  • [3] Model-based control of an electropneumatic brake system for commercial vehicles
    Karthikeyan, P.
    Sonawane, D. B.
    Subramanian, S. C.
    INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2010, 11 (04) : 507 - 515
  • [4] Modeling the pneumatic subsystem of an S-cam air brake system
    Subramanian, SC
    Darbha, S
    Rajagopal, KR
    JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2004, 126 (01): : 36 - 46
  • [5] Modeling the pneumatic subsystem of a S-cam air brake system
    Subramanian, SC
    Darbha, S
    Rajagopal, KR
    PROCEEDINGS OF THE 2003 AMERICAN CONTROL CONFERENCE, VOLS 1-6, 2003, : 1416 - 1421
  • [6] Advanced Brake Assist Subsystem Analysis by Implementing a Mechanical Actuator Concept based on Non-solenoid
    Saravanan, T.
    Kumar, R. Sathish
    Hariram, V.
    International Journal of Vehicle Structures and Systems, 2024, 16 (05) : 768 - 771
  • [7] Model-based Sensor Fault Detection Algorithm Design for Electro-Mechanical Brake
    Hwang, Woohyun
    Han, Kwangjin
    Huh, Kunsoo
    Jung, Jihyun
    Kim, Myungjune
    2011 14TH INTERNATIONAL IEEE CONFERENCE ON INTELLIGENT TRANSPORTATION SYSTEMS (ITSC), 2011, : 962 - 967
  • [8] Energy and economic analysis of model-based air dampers strategies on a VAV system
    Y. Kialashaki
    International Journal of Environmental Science and Technology, 2019, 16 : 4687 - 4696
  • [9] Energy and economic analysis of model-based air dampers strategies on a VAV system
    Kialashaki, Y.
    INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY, 2019, 16 (08) : 4687 - 4696
  • [10] Model-based predictive control applied to a dual regenerative and hydraulic brake system
    Nadeau, J.
    Micheau, P.
    Boisvert, M.
    2015 IEEE VEHICLE POWER AND PROPULSION CONFERENCE (VPPC), 2015,
12345