Experimental and Finite Element Studies of Redrawing for ASS 316 at Elevated Temperatures

被引：2
|
作者：
Singh, Swadesh Kumar [1 ]
Pratoori, Raghunandan [2 ]
Paresi, Prudvi Reddy [3 ]
Kotkunde, Nitin [2 ]
Gupta, Amit Kumar [2 ]
机构：
[1] GRIET, Dept Mech Engn, Hyderabad 500072, Telangana, India
[2] BITS Pilani, Dept Mech Engn, Hyderabad 500078, Telangana, India
[3] Deakin Univ, Inst Frontier Mat, Geelong, Vic 3216, Australia
来源：
MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 04期
关键词：
ASS-316; Redrawing; LDR; Thickness distribution; FE analysis; SHEET;
D O I：
10.1016/j.matpr.2017.05.037
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, experimental and Finite Element (FE) analysis has been investigated for conventional circular deep drawing and redrawing process for ASS 316 at room temperature and 200 degrees C. Initially, uni-axial tensile tests experiments have been performed to analyze the deformation behavior and material properties. Furthermore, circular blanks are deep drawn using conventional deep drawing process and then redrawn to a lower diameter. The various quantitative parameters such as Limiting Draw Ratio (LDR), thickness distribution have been evaluated. The overall LDR obtained is 2.667 at room temperature and 2.933 at 200 degrees C, which is significantly higher than the single stage draw. Additionally, these processes have been simulated using DYNAFORM software with LSDYNA server. The results of the simulations were compared with the experimental results. The FE results are shows close agreement with experimental data. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：5274 / 5281
页数：8
相关论文
共 50 条
  • [31] Finite element simulation of redrawing process of cup without blank-holder
    Murao, T
    Mori, K
    Takagi, A
    Okubo, H
    SIMULATION OF MATERIALS PROCESSING: THEORY, METHODS AND APPLICATIONS, 2001, : 789 - 794
  • [32] Characterization of fatigue property for 316FR at elevated temperatures
    Kobayashi K.
    Hayakawa M.
    Kimura M.
    Yamaguchi K.
    Strength, Fracture and Complexity, 2010, 6 (03) : 129 - 139
  • [33] Finite element simulation on deep-drawing process of magnesium alloy sheet at elevated temperatures
    Zhang, SH
    Zhang, K
    Yu, CF
    Xu, Y
    Yang, K
    Wang, ZT
    INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2005, 39 (1-2) : 154 - 162
  • [34] Analysis and simulation on fracture of structural steel at elevated temperatures based on extended finite element method
    Cai, Wenyu
    Jiang, Jian
    Li, Guo-Qiang
    FIRE SAFETY JOURNAL, 2021, 120
  • [35] On the modeling of thermo-mechanical concrete for the finite element analysis of structures submitted to elevated temperatures
    Nechnech, W
    Reynouard, JM
    Meftah, F
    FRACTURE MECHANICS OF CONCRETE STRUCTURES, VOLS 1 AND 2, 2001, : 271 - 278
  • [36] Experimental validation of a tennis ball finite-element model for different temperatures
    Allen, Tom
    Goodwill, Simon
    Haake, Steve
    ENGINEERING OF SPORT 7, VOL 1, 2008, : 125 - +
  • [37] A comparative study on characterisation of ASS 316L at room and sub-zero temperatures
    Dharavath, Baloji
    Lade, Jayahari
    Varmaa, Dinesh
    Singh, Swadesh Kumar
    Naik, M. T.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2021, 7 (04) : 608 - 616
  • [38] Progress on experimental and finite element studies of oblique elastic impact
    Garland, P. P.
    Rogers, R. J.
    COMPUTER METHODS AND EXPERIMENTAL MEASUREMENTS FOR SURFACE EFFECTS AND CONTACT MECHANICS VIII, 2007, 55 : 165 - +
  • [39] Finite element Simulation studies of AISI 304 for deep drawing at various temperatures
    Jayahari, Lade
    Balunaik, Banoth
    Gupta, Amit Kumar
    Singh, Swadesh Kumar
    MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) : 1978 - 1986
  • [40] RESPONSE OF SIC-COATED CARBON/CARBON COMPOSITES TO TENSILE LOADING AT AMBIENT AND ELEVATED-TEMPERATURES - AN EXPERIMENTAL AND FINITE-ELEMENT STUDY
    MAHFUZ, H
    XUE, DW
    JEELANI, S
    BAKER, DM
    JOHNSON, SA
    COMPOSITES SCIENCE AND TECHNOLOGY, 1994, 50 (04) : 411 - 422
12345